• 한국물환경학회지
• /
• 제23권3호
• /
• pp.391-396
• /
• 2007

공기와 모래를 이용한 건식 식기세척기를 주방에 설치하여 운전하였다. 실험을 위하여 30여종의 양념(Dirt 마커) 과 14종의 접시를 사용하였으며 세척효율은 COD-MN에 의해 평가하였다. 건식 공기세척은 일부 양념에는 효과적이었으나 일부 양념에는 전혀 효과가 없는 것으로 분석되었다. 또한 건식공기세척을 통해서 양념의 완벽한 제거는 불가능하였다. 접시의 형태에 따라 세척효율에 큰 차이를 보였다. 모래와 공기에 의한 세척은 COD-MN 제거에 탁월한 성능을 보였다. 본 연구를 통하여 물을 사용하지 않고 모래와 공기에 의한 건식세척 방법이 가능함이 입증되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권5호
• /
• pp.743-749
• /
• 2010

자동 부침식 가두리 시설을 개발하기 위해 가두리 시설을 구형 부자로 단순화하여 이것의 자동 침하 및 상승 관련 제어 알고리즘 및 프로그램을 개발하였고 실내 수조 실험을 통해 그 유용성을 확인하였다. 또한 기존 연구 결과의 수치와도 비교 분석함으로써 기존 연구의 수치 모델 결과의 유용성을 재확인하게 되었다. 그리고 실물 실험에 대한 선행 연구로써 많은 변수들과 부력에 대한 비선형적인 메커니즘을 제어를 통해 극복하였으며, 이는 실물 실험에 있어 중요한 요소로 작용될 것이다.

• 한국산업융합학회 논문집
• /
• 제12권2호
• /
• pp.69-78
• /
• 2009

Dust in the fabric production sites is increased by the static electricity in air which is generated in the manufacturing process. The static electricity is shown in inverse proportion to humidity of the production sites. The optimum humidity rate for the filament in the production process has been established as 65~75%. Where as, average humidity rate of production site is estimated as 40%. Therefore, it is necessary to raise the humidity rate by 30% to maintain appropriate humidity to control generation of static electricity and dust in the production sites. In this study, a new air-jet water sprayer was developed and it can produce $10{\mu}m$ sprayed particles. When the air-jet water sprayer was operated on the production site dust generation rate was shown far below the environmental standard. It is assumed that when the air jet sprayers was applied to 1,000 fabric machines of 5 gloves making plants, its productivity and rates of operation will be improved by value of about 2.5 billion Won a year.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.59-67
• /
• 2013

The odor occurring in the sewage system induces the displeasure, the disgust such as the headache, the vomit, etc. and increases the spiritual stress and disturbs the pleasant life of residents. These odors occur mainly in the area of combined sewage system treatment, being created in the personal sewage treatment plant such as septic tank and are incoming to sewage pipes and emitted to the outside through the manhole and the receiver, etc.; and this causes odors to the people. The Hydrogen Sulfide, the Methyl Mercaptan, the Ammonia, etc. are materials causing the odor, the more serious issue of odor is occurring since the septic tank of degradation process is being applied. The primary cause of odor is the decomposition of human feces in the septic tanks and sewage disposal facilities. The purpose of this study is reduction of hydrogen sulfide using air supplying and SOB(Sulfur-Oxidizing Bacteria). As a result of this study of the air supply system and the SOB media equipment by air supply, in case the air is injected to SOB media compared to the injection of air only, the removal efficiency the hydrogen sulfide was average 3.4 times higher.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.621-626
• /
• 2006

Regenerative evaporative cooling is known as an environment-friendly and energy efficient cooling method. A regenerative evaporative cooler (REC) consisting of dry and wet channels is able to cool down the air stream below the inlet wet-bulb temperature. In the regenerative evaporative cooler, the cooling effect is achieved by redirecting a portion of the air flown out of the dry channel into the wet channel and spraying water onto the redirected air. In this study, a horizontal regenerative cooler is considered. In the horizontal regenerative cooler, the flow direction of evaporating water has a right angle to the flow direction of supply air. This difference was investigated with visualization technique and simplified 2-module performance test was done in a thermo-environment chamber. Optimum design configuration is changed due to the wet channel which are easily fully covered with evaporating water and block the air flow inside the channel. Applying the optimized fin configuration design with the highly wetting surface treatment, a regenerative evaporative cooler was fabricated and tested to Identify the cooling performance improvement and operation characteristics. From the experimental results at the intake condition of $32^{\circ}C$ and 50% RH, the supply temperature was measured to be around $23.4^{\circ}C$. The cooling effectiveness based on the inlet dewpoint temperature was evaluated 73% which is almost close to the design expectation.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.866-871
• /
• 2006

Recently according to the fashion of well-being, the case study of under floor heating system type for residential space is increasing. Specially double slab floor system can make several roles as reducing the acoustic noises and also supplying fresh air through the gap. So in present study floor heating performance was examined with various location of the space in the case of floor supply air and ceiling supply air. In both cases return air went out through ceiling opening. As one of the result is that when using the heat pipe type floor heating system the temperature difference between supply and return water was $15.2^{\circ}C$, but in case of commercial type floor heating system the temperature difference was $5.3^{\circ}C$ when the supply water temperature was $50^{\circ}C$.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.456-465
• /
• 1988

The performance of the cold latent heat storage is investigated by experiment and by a simplified analytic approach. The heat storage tank has eight horizontal circular tubes and one path of refrigerant evaporating tube. The phase change material in the heat storage tank is water which is frozen by evaporating refrigerant of refrigeration system and melts by the warm air in the heat storage tank. In the experiment, the performance has been studied by the various conditions including the initial water temperature on solidification and flow rate and temperature of air. The rate of recovered heat has been simulated by a simplified model and the results shows a good agreement. In solidification process, initial water temperature causes time delay corresponding to the sensible heat and it is found that the shape of evaporator is important. In melting process, the recovered heat rate from the heat storage tank is proportional to $Re^{0.8}(T_{bi}-T_f)$ of air where $T_{bi}$ and $T_f$ indicate temperatures of inlet air and phase change, respectively. And the deminishing rate of the recovered heat is higher for the higher heat rate.

• 한국지반공학회논문집
• /
• 제26권2호
• /
• pp.23-32
• /
• 2010

본 연구는 특별히 물과 관련된 실트질 계열의 경량기포혼합토(기포슬러리밀도 10kN/$m^3$ 대상)의 특성변화를 알아보기 위해 수행되었다. 일축압축강도, 투수계수, 모관상승고 등에 대한 연구가 이루어졌으며, 이들 연구를 뒷받침할 수 있는 경량기포혼합토의 미세구조에 대한 연구도 아울러 진행되었다. 사진을 통한 미세 구조 분석 결과 경량기포혼합토 내의 기포는 다양한 크기로 존재하며, 위치별 기포의 분포는 거의 일정한 것으로 밝혀졌다. 또한 기포 안에 아주 많은 미세한 공극들이 존재하여 물에 의해 경량기포혼합토가 포화상태에 가까이 도달될 수 있음이 밝혀졌다. 이미지를 이용한 간극률 산정도 같이 이루어졌다. 일축압축강도 시험 결과, 물에 의한 극한강도 값의 변화는 없으나 응력-변형거동에는 영향을 주는 것으로 나타났다. 경량기포혼합토의 투수계수는 평균 $4.857{\times}10^{-6}cm/sec$로 점토보다는 약간 큰 값을 갖는 것으로 나타났다. 경량기포혼합토의 모관상승은 시험초기부터 100분 이내에는 가파르게 진행되고, 그 이후 경과시간에 따라 상승속도가 점진적으로 완만하게 진행됨을 알 수 있다. 모관상승은 곧 재료의 단위중량 증가를 유발하므로 경량기포혼합토의 설계와 유지관리 시 각별한 주의가 요구된다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권1호
• /
• pp.30-36
• /
• 2004

The present study investigates the fire suppression characteristics using a water mist fire suppression system. Numerical simulations of fire suppression with water mist are performed with considering the interaction of fire plume and water spray. The predicted temperature fields of smoke layer are compared with those of measured data. Numerical results agree with the experimental results within $10^{\circ}C$ in the case without water mist. In the case of fire suppression with water mist, numerical results do not predict well for temperature field in the gradual cooling region after water mist injection. But the predicted results of initial fire suppression are in good agreement with those of measured data. The reason for the discrepancy between predicted and measured data is due to the poor combustion modeling during the injection of water mist. More elaborate models for numerical simulation are required for better predictions of the fire suppression characteristics using water mist.

• 한국화재소방학회논문지
• /
• 제9권2호
• /
• pp.10-16
• /
• 1995

This study discribes characteristics of water spray for extinguishment of gasoline fire. Experiments are carried out for the gasoline pool fire nth the atomizing nozzles. Droplet size, spray pressure, amount of water which reaches the flame base and velocity of water spray are measured to find extinguishment conditions. Air entrainment due to the water spray and extinguishing process of gasoline fire by water spray are visualized. Boundary conditions of water spray for extinguishment of gasoline pool fire is quantitatively shown. As the result of experiments, it is found that the velocity of entrainment air and sprayed water are almost same and the water droplets size having small diameter under 40$\mu\textrm{m}$ can not extinguish the fire because too small droplets does not reach the fuel surface.