• 산업기술연구
• /
• 제17권
• /
• pp.227-232
• /
• 1997

This study was conducted to evaluate durability of concrete which are increasingly demanded recently. Concrete durability properties incorporating waste foundry sand was performed with the variable of W/C ratio, Sand/Waste foundry sand ratio and Air entrainment-Non air entrainment. Cylinder specimens were made and subjected to freezing and thawing cycle at $-18^{\circ}C$ and $4^{\circ}C$. Dynamic modulus of elasticity were evaluated as F/T cycle increase. The results show that decreasing W/C ratio and AE concrete makes improved resistance of freezing and thawing improved. Especially, resistance of freezing and thawing is improved by Fine aggregate/Waste foundry sand ratio which is 50%, 25%, 0% in a row.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.497-502
• /
• 2000

This study was performed to change the latex content for properties of freezing-thawing resistance. When styrene-butadiene latex is added to portland cement, aggregate and water, a concrete with the color, consistency and workability of ordinary conventional concrete results, but with 20% to 35% less water. When cured, the concrete consists of hydrated cement and aggregate interconnected by a film of latex particles. In general, increasing the amount of latex will produce concrete with increased tensile and flexural strength and lower modulus of elasticity. Air entrainment has been used in conventional concrete for the past 50 years to impart freeze-thaw resistance. Latex modified concrete does not need additional air entrainment for freeze-thaw resistance provided adequate cure occurs.

• 한국화재소방학회논문지
• /
• 제9권2호
• /
• pp.10-16
• /
• 1995

This study discribes characteristics of water spray for extinguishment of gasoline fire. Experiments are carried out for the gasoline pool fire nth the atomizing nozzles. Droplet size, spray pressure, amount of water which reaches the flame base and velocity of water spray are measured to find extinguishment conditions. Air entrainment due to the water spray and extinguishing process of gasoline fire by water spray are visualized. Boundary conditions of water spray for extinguishment of gasoline pool fire is quantitatively shown. As the result of experiments, it is found that the velocity of entrainment air and sprayed water are almost same and the water droplets size having small diameter under 40$\mu\textrm{m}$ can not extinguish the fire because too small droplets does not reach the fuel surface.

• 한국가시화정보학회지
• /
• 제6권2호
• /
• pp.39-44
• /
• 2008

The Roll-to-Roll system including continuous flexible thin materials and roller has its wide range of applications especially in the electronic printing industry. The industry is growing rapidly and the printing speed is also improving. However, the printing machine based on web and roller system has it own problem. As the web speed increases, the failure to maintain the contact may occur and the air entrain between the roller and the paper web may exist. Air bubbles may remain attached to electronic ink on the web causing defects on product surface. With the development of image processing technique, the airflow around the web and rolls can be visualized and calculated by PIV method. In our experiment, the simple web and rolls system is used to R2R simulator. The flow field is studied at various web speeds and positions. The result shows that the flow field has complicated structure with turbulent characteristic and the main trend of flow is obtained by taking time average of flow field.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.610-611
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.128.2-128
• /
• 2001

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 춘계학술발표대회 요약집
• /
• pp.145-145
• /
• 2003

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2004년도 춘계 학술발표회
• /
• pp.474-479
• /
• 2004

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권8호
• /
• pp.1203-1210
• /
• 2004

It was reported recently that the pump head degradation near the best efficiency point from single-phase flow to the break-down due to air entrainment became less in a screw-type centrifugal pump than in a general centrifugal pump. In this paper, I carried out internal pressure measurements and visualizations, and investigated the various physical phenomena occurring inside a screw-type centrifugal pump operated in air-water two-phase flow. The results could give some characteristics about the degradation of pump performance on air-water two-phase flow.

• 에너지공학
• /
• 제24권1호
• /
• pp.114-122
• /
• 2015

수평 성층류 2상 유동에서 기체의 속도가 액체의 속도보다 상대적으로 큰 고유속 유동조건에서는 불규칙한 파형들이 생성되고 이때 상 경계면에서는 액적이탈이 발생한다. 한국원자력연구원(KAERI)에서는 이러한 상 경계면에서의 액적이탈 현상을 기구학적으로 예측하기 위하여 전단력, 표면장력, 그리고 중력 항으로 구성되는 새로운 액적이탈 모델을 제시하였다. 그러나 이 액적이탈 모델 내부에는 아직 결정되지 않은 모델 계수가 존재한다. 모델 계수를 결정하기 위해서는 두 상 사이의 계면파 특성과 관련되는 물리변수들에 대한 실험데이터의 확보가 필요하다. 주요 물리변수들에는 파의 기울기, 파의 빗변길이, 파의 속도, 파의 주파수, 그리고 파장이 있다. 본 연구에서는 계면파 특성과 관련된 주요 물리변수들을 측정하기 위하여 폭 40 mm, 높이 50 mm, 길이 4.2 m의 수평사각유로에서 가시화실험을 수행하였다. 실험은 1기압의 물-공기 성층류 유동에서 액적이탈이 발생되는 조건에서 수행되었다. 본 실험에서 계면 형상을 2차원적으로 가시화하고 계면파에서 국소적인 물속도 분포를 측정하기 위하여 유로 측면에서 PIV기법을 적용하였다. 추가적으로, 가시화실험을 통해 획득한 계면 이미지로부터 측정된 계면 높이를 검증하기 위하여 평행 와이어 전도도 센서를 개발하였다. 가시화방법과 센서를 통해 측정된 수위를 비교한 결과, 두 가지 방법론에 의해 측정된 수위결과가 잘 일치함을 확인하였다. 최종적으로 개발된 측정기법을 적용하여 액적이탈 조건에서 계면파 특성과 관련된 주요 물리변수들을 측정하였다.