• 한국식품영양과학회지
• /
• 제25권3호
• /
• pp.453-459
• /
• 1996

This study was carried out to determine the changes in quality during the drying process and the optimum drying condition for utilizing soybean curd residue. The quality criteria for soybean curd residue were acid value, peroxide value, fatty acid composition and microbial concentration. The acid values of soybean curd residue were 7.5, 4.5 and 5.9 KOH mg/g upon 12 hour drying with open-air sun, ambient-air blast and warm-air blast, respectively. The numbers of total aerobic bacteria and molds increased remarkably during drying with open-air sunlight, ambient-air blast and warm-air blast except for hot air blast. Among different drying methods, the hot air blast drying(1kg of sample) was the most effective methods, which completed in three hours. Also, the drying method demonstrated a typical drying curve ; settling down, constant rate drying and falling rate drying period were shown within one hour, from one and three hours and after three hours, respectively. Moreover, there was significant variation in the constant drying period for the quality of soybean curd residue.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.167-167
• /
• 1982

Italian poplar (Populus euramericana) rotary veneers were press-dried and air-dried to study drying curves, thickness shrinkage and width shrinkage of them under several drying conditions such as drying temperatures and veneer thicknesses. The results of the study are summarized as follows; 1. In press-drying, drying times from green condition to about final moisture content of 10 percent with veneer thickness of 0.6mm by platen temperatures required about 10 minutes at platen temperature of $100^{\circ}C$, 3 minutes at $110^{\circ}C$, 1 minute at $120^{\circ}C$ and $130^{\circ}C$, respectively. 2. In press, drying, drying times from green condition to about final moisture content of 10 percent by veneer thicknesses required 2 minutes at veneer thickness of 0.6mm, 4 minutes at 1.2mm,6 minutes at 1.8mm and 9 minutes at 3.6mm, respectively. 3. In air-drying, drying times from green condition to air-dried moisture content by veneer thicknesses required 15 hours at veneer thickness of 0.6mm, 18 hours at 1.2mm and 23 hours at 2.4mm, respectively. 4. Thickness shrinkage of press-drying was remarkably greater than that of air-drying, but width shrinkage of press-drying was rather smaller. 5. Difference of thickness shrinkage among platen temperatures was insignificant, and width shrinkage at platen temperature of $130^{\circ}C$ was the least.

• 동아시아식생활학회지
• /
• 제10권2호
• /
• pp.136-141
• /
• 2000

천연에 널리 존재하는 민들레를 차라는 식품형태로 접목시켜 상용식품으로 개발하고자 전처리 과정에 따른 특성변화를 분석하였다. 그 결과, 고형분 함량과 추출수율은 예비건조구보다 예비건조를 하지 않은 비처리구에서 낮은 값을 나타내었다. 탁도와 갈색도는 예비건조 유무에 따라 큰 차이가 없었지만 비처리구보다 예비건조구에서 다소 높은 갈색도를 나타내었고 찌는 시간이 길어질수록 낮은 탁도와 갈색도를 나타내었다. 관능검사 결과, 각 변수간에 교우작용이 생겨 유의적인 차이는 없었으나 예비건조 하지 않고 찌는 시간 60초로 처리할 경우, 산 맛, 풋내 및 떫은맛이 가장 적었다. 전체적인 기호도는 비처리구보다 예비건조구에서 유의적으로 매우 높은 평가를 나타내었고. 예비건조 하지 않은 비처리구는 60초간 찐 뒤 볶음처리 하는 것이 기호도면에서 유의적으로 높은 점수를 나타내었다. 송풍건조 시간이 길어질수록 고형분 함량, 추출수율. a값, b값, 탁도 및 갈색도는 높았고, L값은 낮았다. 볶음시간도 같은 경향을 나타내었다. 전체적인 기호도는 10시간 송풍 건조하여 5분간 볶음처리 하는 것이 가장 높은 기호도를 나타내었다. 위의 결과를 종합해 볼 때 비처리구에서 60초 찐 후 볶음 차 제조 공정에 따라 제조한 것과 3$0^{\circ}C$에서 10시간 송풍건조 후 볶음 차 제조공정에 따라 제조한 것이 좋은 민들레 차를 제조하기 위한 공정이라고 말할 수 있다.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.189-194
• /
• 2012

The purpose of this study is to predict the performance of a cyclone drying machine and air ejector used in drying applications. This paper deals with optimization of the geometry of the ejector for sludge drying using computational fluid dynamics. To facilitate the design of a jet ejector for air drying machines, a numerical model of simultaneous mass and heat transfers between the liquid(sludge) and gas(air) phases in the jet ejector was developed. The steady-state model was based on unidimensional balance equations of mass, energy and momentum for the liquid and gas phases. It was shown that the optimum condition to minimize pressure and momentum loss of air in the ejector was d=220mm. It was found that sludge particles inside the cyclone was smoothly discharged by the conical wedge installed on the bottom of the cyclone.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.427-434
• /
• 2000

In tradition, there have been two kinds of drying methods, which are sun drying and artificial drying. The sun drying method which has been adopted traditionally has been replaced by the hot-air drying method which is one of the most general methods of artificial drying, with its simple drying system, low initial cost of drying plant, and easy operating method. But the hot-air drying method has some defects; (1) much energy loss happens due to the discharge of hot air during the drying process, (2) control of drying rate is not easy on account of changing relative humidity of inlet air for uniform hot air temperature, (3) high temperature of foods in drying process brings about the production of low-grade drying products. Vacuum drying takes advantage of energy saving and mass production because it reduces the drying time by increasing the drying rate under low temperature condition. The aim of this paper is to develop the low temperature vacum dryer, with low initial investments and operating costs, easy operating method and trouble-free operation.

• Journal of Biosystems Engineering
• /
• 제34권3호
• /
• pp.175-182
• /
• 2009

This study was conducted to investigate the drying characteristics of tissue cultured mountain ginseng roots. The far infrared rays dryer of a double blast system used for this experiment can control the drying parameters such as far infrared heater temperature and air velocity. The far infrared rays drying tests of tissue cultured mountain ginseng roots were performed at air velocity of 0.4, 0.6, 0.8 m/s, under drying air temperature of 50, 60, and $70^{circ}C$, respectively. The results were compared with one obtained by the heated air drying method. The drying characteristics such as drying rate, color, energy consumption, saponin components and antioxidant activities were analyzed. The results showed that the drying rate of far infrared rays drying was faster than that of heated air drying and due to high temperature of drying air and fast air velocity, the far infrared rays drying of double blast type was superior to the heated air drying. The value of the color difference for heated air drying was 10.11${\sim}$12.99 and that of far infrared rays drying was in the range of 7.05${\sim}$7.54, which was in the same drying condition, also energy consumption of far infrared rays drying was in the range of 3575${\sim}$6898 kJ/kg-water. At the same time, the antioxidant activities using far infrared rays drying were higher than those using heated air drying.

• Journal of Biosystems Engineering
• /
• 제19권2호
• /
• pp.112-123
• /
• 1994

At present, no appropriate drying conditions can be found for the heated-air drying of mushroom in Korea. Usually, mushroom is being dried at the temperature range of 40 to $50^{\circ}C$ until the moisture content reaches 10~13% (wb). However, drying characteristics of the mushroom should be investigated for quality improvement and efficient drying operation of the mushroom. The results of this study may be summarized as follows ; 1. The effect of air temperature on the rate of drying was greater than that of relative humidity for drying of mushroom, and the rate of drying was increased with increase in the air temperature. 2. Drying rate for Shiitake mushroom showed falling-rate period of drying without constant-rate period of drying. Drying rate for Oyster mushroom showed a short constant-rate period at the initial stage of drying process, and followed by falling-rate period of drying. 3. Exponential and App.-Diffusion models were found to describe well the drying process of Shiitake mushroom. Exponential and Thompson models for Oyster mushroom in which Thompson model was the most suitable for Oyster mushroom. 4. The equilibrium moisture content of the mushroom decreased with decrease in the air temperature and increase in the relative humidity. In room condition($20^{\circ}C$, 54% RH), the calculated values of the equilibrium moisture content showed 11.17% for Shiitake mushroom and 13.19% for Oyster mushroom, respectively.

• Journal of Biosystems Engineering
• /
• 제16권1호
• /
• pp.60-82
• /
• 1991

Drying process of red pepper is very important in terms of drying cost and quality of the end product. Recently, many studies on red pepper drying have been performed. Nevertheless, an optimum drying condition is not established yet. Drying characteristics of red pepper is much affected by drying factors such as variety and initial state of red pepper as well as by environmental drying factors such as temperature and relative humidity of drying air. Various varieties of red pepper are being cultivated and the initial state of red pepper at harvest is very ambiguous. For this reason, it is very costly and time-consuming to establish an optimum drying condition of red pepper by experiment. A general drying model to descirbe a drying process has not been developed due to diversity of drying characteristics of red pepper. This study was, therefore, performed to develop a general drying model describing a drying process of red pepper. The results from this study are summarized as follows. 1. A basic model was established to develop an appropriate mositure content model and temperature model describing a drying process of red pepper, and the basic model was validated with experimental data. 2. The bone dry weight of fruit and mositure content were accepted satisfactorily as parameter to define the arbitrary red pepper. 3. The equilibrium moisture content of red pepper was found out to be different according to the variety of red pepper, air temperature and relative humidity. Also, the EMC model was developed using the parameters of air temperature, relative humidity and bone dry weight of fruit. 4. A general drying model for red pepper was developed, parameters of which were expressed as the function of drying factors related with drying phenomena. The developed drying model was found out to describe well the drying process of red pepper.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.99-102
• /
• 2010

In the present study, a three-dimensional numerical simulation was performed in a paint drying system of vehicle assembly line. In the drying system hot air and cool air are blown in turn from the nozzles to dry the trim of vehicle. Inlet boundary condition using user subroutine code is adopted to consider the moving motion of the vehicle. The present paper aims to improve the performance of the drying system. The transient distribution of temperature and velocity at the surface of the vehicle were predicted numerically. From these results, optimal operating condition of the drying system are to be suggested.

• 한국수산과학회지
• /
• 제33권3호
• /
• pp.192-197
• /
• 2000

본 연구는 대멸치로 소건품을 제조하기 위하여 건조조건에 따른 수분함량의 변화와 지질의 산화를 조사하였다. 수분은 $60{\circ}C$ 열풍건조 (풍속 1.4 m/sec), $40{\circ}C$ 열풍건조 (풍속 1.4 m/sec), 천일건조 ($30{\pm}5{\circ}C$) 및 $20{\circ}C$ 냉풍건조 (풍속 3.1 m/sec)하였을 때 건조 7시간에 각각 $9.0{\%}, 34.0{\%}, 34.0{\%}, 38.8{\%}$의 함량을 나타내었다. 건조중 산가, 과산화물가, 카보닐가 및 지용성 갈변도는 건조온도가 높을수록 빠르게 증가하였으며, $20{\circ}C$ 냉풍건조하였을 때 지질의 산화가 가장 현저하게 억제되었다. 건조방법에 따른 지방산의 조성변화는 천일건조가 가장 라르고, 그 다음으로 $60{\circ}C$ 열중건조, $40{\circ}C$ 열풍건조, $20{\circ}C$ 냉풍건조의 순이었다. 건조 중 대멸치의 지방산 조성은 폴리엔산 (20 : 5, 22 : 6)은 감소하고 포화산 (14 : 0, 16 : 0)과 모노엔산 (16 : 1, 18 : 1)은 증가하였다. 대멸치의 적정 건조 조건은 온도 $20{\circ}C$, 상대습도 $30{\%}$ 정도에서 냉풍건조하는 것이 지질의 산화억제에 효과적이었다.