• 한국안전학회지
• /
• 제11권4호
• /
• pp.49-53
• /
• 1996

Corona discharges in air insulated electric power systems cause power loss, produce interfering electromagnetic radiation, and can indicate incipient failure. An understanding of corona discharges in air gap is clearly Important. The Wavelet transformation is an extended method of fourier transformation. The fourier method is a powerful tool for signal analysis, but it can't include information for time. However the wavelet transformation analysis can include on the information of time and frequencies at the same time. In this paper we apply the wavelet transformation to the corona signals in needle-plane air gap for the purpose of analysis of developing aspects of corona discharges. We analyzed the developing aspects of corona discharges, namely, corona discharge current, repetition rates, width of Pulse distribution region, pulseless region and frequencies distribution of corona discharge pulses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1523-1525
• /
• 1996

Partial discharges(PD) in air insulated electric power systems cause power loss, produce interfering electromagnetic radiation, and can indicate incipient failure. An understanding of PD in air gap is clearly important. The Wavelet transformation is an extended method of fourier transformation. The fourier method is a powerful tool for signal analysis, but it can't include informations for time. However tile wavelet transformation analysis can include on the informations of time and frequency at the same time. In this paper we apply the wavelet transformation to the PD signals in needle-plane air gap for tile purpose of analysis of developing aspects of PD. We can analyze the developing aspects of PD, namely, PD current, repetition rates, width of pulse distribution region, pulseless region and frequencies distribution of PD pulses.

• 열처리공학회지
• /
• 제13권4호
• /
• pp.253-258
• /
• 2000

The present study aimed to develop the TRIP(transformation induced plasticity) aided high strength low carbon steel sheets using reverse transformation process. The cold-rolled 0.14C-6.5Mn steel was reverse-transformed by slow heating to intercritical temperature region and air cooling to room temperature. An excellant combination of tensile strength and elongation of $98.3kgf/mm^2$ and 44.4% appears. This combination comes from TRIP phenomena of retained austenite during deformation. The stability of retained austenite Is very Important for the good ductility and it depends on diffusion of carbon and manganese during reverse transformation. The air cooling after holding at intercritical temperature retards the formation of pearlite and provides the carbon enrichment in retained austenite, resulting the increase of elongation in cold-roiled TRIP steel.

• 물과 미래
• /
• 제26권1호
• /
• pp.71-79
• /
• 1993

공기주입 부유구조물에 대한 압력변화의 비선형 특성과 파랑변형을 이론적 및 실험적으로 검토한다. 섭동법과 Green 공식에 의한 두가지 이론적 방법(방법I, II)이 잠수, 반잠수 부유구조물에 의한 파의 비선형성을 평가하기 위해서 적용된다. 더우기 부유 구조물 내의 공기압 변화를 고려하기 위하여 Boyle-Charles 법칙에 따른 단열변화를 가정하여 유도된 공기압축모델이 새로이 개발되었다. 가상경계에서 감쇠정상파를 고려한 방법 I의 이론치는 감시정상파의 영향이 미치지 않는 가상 연직경계면을 같는 방법 II의 값과 잘 일치한다. 두 이론에 의한 이론치는 실험치와 잘 일치함을 보여준다.

• 한국항만학회지
• /
• 제10권1호
• /
• pp.25-36
• /
• 1996

Generally, it is pointed out that a nonlinear analysis is needed to estimate accurately the water surface fluctuation and dynamic responses of a floating structure in case of large wave reflection. In this study, a frequency-domain method is applied and newly developed to analyze the nonlinear characteristics of the air-chamber floating breakwater. The air-chamber floating breakwater in this study can control well the wave transformation, motions of the structure and its natural frequency by adjusting the air depth in the chamber. Experiments are carried out to verify the numerical results. It is appeared that the mean water level is setup in the anti-node and setdown in the node, while the nonlinearity in wave profile is larger in the node than in the anti-node. Because of vertical mooring system, the sway, especially the time-independent nonlinear component, plays predominant role in the motion. On the other hand, the time-dependent component, as well as the time-independent one to the tensile force of mooring line contributes greatly, and the time averaged value presents tensional force oriented to the onshore side due drift force.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1992년도 수공학연구발표회논문집
• /
• pp.397-407
• /
• 1992

• International Journal of Control, Automation, and Systems
• /
• 제5권6호
• /
• pp.652-662
• /
• 2007

This paper presents a new and simple method for sensorless operation of matrix converter drives using a constant air-gap flux and the imaginary power flowing to the motor. To improve low-speed sensorless performance, the non-linearities of a matrix converter drive such as commutation delays, turn-on and turn-off times of switching devices, and on-state switching device voltage drop are modeled using PQR transformation and compensated using a reference current control scheme. The proposed compensation method is applied for high performance induction motor drives using a 3 kW matrix converter system. Experimental results are shown to illustrate the feasibility of the proposed strategy.

• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.618-624
• /
• 2018

We developed a mass production method that simultaneously controls the phase transformation and crystal size of $TiO_2$ coatings on multiwalled carbon nanotubes (MWCNTs). Initially, MWCNTs were successfully coated with amorphous 15-20-nm-thick $TiO_2$ by an in-situ sol-gel method. As the calcination temperature increased in both air and argon atmospheres, the amorphous $TiO_2$ was gradually transformed into the fully anatase phase at approximately $600^{\circ}C$, a mixture of the anatase and rutile phases at approximately $700^{\circ}C$, and the fully rutile phase above approximately $800^{\circ}C$. The crystal size increased with increasing calcination temperature. Moreover, above $600^{\circ}C$, the size of crystals formed in air was approximately twice that of crystals formed in argon. The reason is thought to be that MWCNTs, which continuously supported the stresses associated with the reconstructive phase transformation, disappeared owing to complete oxidation in air at these high temperatures.

• 한국해안·해양공학회논문집
• /
• 제29권6호
• /
• pp.305-314
• /
• 2017

단독의 파력발전변환장치를 설치하는 경우 경제성이 떨어지는 문제점이 있으므로 기존 혹은 신설의 방파제에 적용하여 파랑제어와 파랑에너지의 이용을 동시에 도모하는 방식이 많이 추진되어 왔다. 본 연구는 전편의 연구(Lee et al., 2014)에서와 같이 부유식방파제로 연구 개발된 공기주입식 부유식방파제에 진동수주형 파력발전시스템을 탑재한 경우를 대상으로 부유식방파제로의 기능과 파력발전장치로의 기능을 병행하여 검토하였다. 여기서, 전편의 연구(Lee et al., 2014)에서는 공기실내에서 공기의 동적거동에 단열변화에 따른 압축성을 고려한 반면에 본 연구에서는 비압축성의 경우에 구조물의 고정시 혹은 부유시에 각각에 대한 파랑변형율, 공기흐름속도 및 구조물의 운동을 검토하였으며, 공기의 동적거동에 대한 압축성의 고려여부에 따른 결과의 차이를 논의하였다. 수치해석법으로는 선형속도포텐셜이론에 기초한 경계요소법을 적용한다. 얻어진 모든 해석결과에 따르면 공기압축성을 고려한 전편의 연구와 거의 동일한 결과를 나타내었으며, 따라서 공기실내에서의 공기거동해석에 압축성을 고려하지 않는 본 해석이 보다 효율적이고, 유용한 것으로 판단된다.

• Tribology and Lubricants
• /
• 제12권1호
• /
• pp.47-55
• /
• 1996

In this study, steady state and perturbed pressures are experimentally measured under inherently compensated restrictors in externally pressurized air bearings. A piezo actuator is used for simulating small displacement perturbation in the air film. The pressures under the restrictors are measured by a miniature type pressure transducer and the height of the air film is measured by capacitance type gap sensors developed by Chapman's method. The perturbed pressure is obtained through Fourier transformation of the two signals. The measured perturbed pressures are in good agreement with the calculated values.