• Journal of the Korean Society of Food Culture
• /
• v.18 no.1
• /
• pp.37-44
• /
• 2003

Fat and sugar reduced yellow layer cake system was developed with varied replacement level of 30%, 60%, and 90% for AD(amylodextrin) and 10%, 30%, and 50% for PD(polydextrose). Physicochemical and sensory characteristics were investigated and optimum replacement level was also decided using response surface methodology. Sample groups of PD10AD30 had significantly the lowest specific gravity and viscosity, indicating the stable batter system with high air incorporation. Sample groups with PD10AD90 showed the highest volume index and were not significantly different from those of the PD10AD30. Sensory results indicated that PD30AD30 were significantly the most springy and moist, and the least hard of all sample groups. Sample groups with PD10AD90 had the least adhesiveness value. To establish the optimum substitution level using RSM, the restriction level was set up as moistness over five point, hardness under five points, and adhesiveness under four points. The optimum substitution level was 20% for PD and 88% for AD.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.425-428
• /
• 2005

In this study, the experiment was carried out to investigate and analyze the strength properties and flowability of concrete using meta kaolin. The main experimental variables were water/binder ratio 40.0$\%$, water content 170kg/$m^{3}$ and mineral admixtures such as slag powder, silica fume and meta kaolin. According to the test results, the principle conclusions are summarized as follows. 1) The flowing property of concrete that uses meta kaolin appears to be the same to that of the silica fume concrete, but the slump flow that evaluates the compaction ability of concrete shows the most favorable performance. 2) The air content of the concrete that uses meta kaolin can be effectively controlled for the target performance in compliance with the use of AE agent. 3) When it comes to the strength of concrete that uses meta kaolin, the most favorable development of strength occurs when the replacement rate is 10$\%$, in case of the silica fume, and the slag power. In addition, as the replacement rate increases, so becomes the development of concrete strength favorable.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.27-28
• /
• 2019

Recently, a bed company detected a radon more than Red Politics and became a hot topic of conversation. This has led to increased interest in radon, and a number of free-of-charge bodies have also been established to recognize the dangers of radon. In addition, the Korean Institute of Geological and Resource Research is planning to assist the installation of radon alarm systems in 10,000 households nationwide, free of charge. Since radon is a colorless, odorless and tasteless gas that causes lung cancer, it aims to reduce lung cancer incidence by absorbing radon using bamboo activated carbon as a way to reduce it. Due to the use of bamboo activated carbon, radon concentration per hour tends to decrease as substitution rate increases, and table flow tends to decrease as substitution rate increases. Through this experiment, 30% of the replacement rate of bamboo activated carbon is judged to be the most suitable replacement rate.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.5
• /
• pp.407-417
• /
• 2016

Effects of resistant starch as a functional substitute on the quality of Yukwa were determined. Replacement ratios of resistant starch were 2, 4, and 6% of glutinous rice flour. Regarding pasting properties of Yukwa dough replaced with resistant starch, initial pasting temperature significantly increased and peak viscosity significantly decreased with increasing resistant starch. The moisture contents of bandegi and Yukwa base replaced with resistant starch were higher than that of the control. The expansion ratio of Yukwa base replaced with resistant starch significantly decreased with increasing resistant starch, and there were no significant differences in the oil absorption ratio. Lightness (L) of Yukwa base replaced with resistant starch increased significantly with increasing resistant starch. Appearance of Yukwa base replaced with resistant starch showed a shortened length and increased width with increasing resistant starch, and cross-section showed an oval shape, fine air cell distribution, and increased outer layer thickness. Hardness and peak number increased significantly with increasing resistant starch. The overall acceptability of Yukwa base replaced with 6% resistant starch was the highest among the samples, but the result was not significant. The above results show that resistant starch substitution in Yukwa improved the texture and further could improve health functionality due to its dietary fiber content. Resistant starch was appropriate as a 6% replacement for glutinous rice flour in Yukwa.

• Journal of Sensor Science and Technology
• /
• v.22 no.4
• /
• pp.292-296
• /
• 2013

The ultrasonic wind sensor that pass through the air, beating the delivery of ultrasonic wind speed increases or decreases by the physical characteristics of the wind speed and the direction of the sensor, the transmission and reception of ultrasonic time difference measured by a two-axis vector wind and wind speed measured by calculating a device that converts the digital signal is Anemometer and wind direction meteorological facilities management, management of the ship sail used for various purposes, including, but used the existing 3-cup (mechanical) anemometer wind rotor caused by mechanical wear parts replacement due to the short-term, the reliability of the product is low, parts replacement, and according to the characteristics caused the car, there is a problem in high maintenance costs. In addition, because the bearings use of the marine environment and the cryogenic environment was constrained. In this study, the excellent long-term reliability, using ultrasonic-type environment that is not constrained to produce wind anemometer located $90^{\circ}$ conformal road using four piezoelectric sensors were fabricated structures, the piezoelectric oscillator circuit produces a rash and receiving transmit and receive speeds the car through the two-axis vector calculation to measure wind velocity processor firmware programming, and its characteristics were tested.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.615-622
• /
• 2017

This study was conducted to evaluate the odor reduction efficacy of the dip injection wet scrubber (DIWS) using tap water as washing fluid. The $NH_3$ and $H_2S$ removal efficiency of 7 day batch operated DIWS was evaluated twice over a total of 14 days of experiment. The $NH_3$ removal efficiency ranged from 26 to 37%. The $H_2S$ removal efficiency was between 22 and 30%. The pH of the washing fluid maintained below 8 and the $NH_4{^+}$ concentration tended to keep constant around 350 ppm after 5 days of washing-fluid replacement. Therefore, the 5-day washing fluid replacement interval is more preferable than the 7-day interval. The $NH_4{^+}$ concentration and the electrical conductivity (EC) showed a high correlation. The EC measurement can be used as an alternative to conventional $NH_4{^+}$ concentration measurement method for real time monitoring of washing fluid condition.

• Journal of Audiology & Otology
• /
• v.25 no.2
• /
• pp.104-109
• /
• 2021

Background and Objectives: To assess whether the audiological and clinical outcomes of type 0 tympanoplasty (T0) performed using cartilage were comparable with those of ossiculoplasty in patients who underwent canal wall down mastoidectomy (CWDM). Subjects and Methods: This study included patients who had chronic otitis media with cholesteatoma and underwent CWDM with ossiculoplasty involving partial ossicular replacement prosthesis (PORP), total ossicular replacement prosthesis (TORP), or T0. Anatomical success rates and hearing outcomes were analyzed. Results: Seventy-two patients were included in this study; 29 of them underwent CWDM with T0, 27 underwent CWDM with PORP, while 16 underwent CWDM with TORP. The difference in mean improvement in the air-bone gap (ABG) between the groups was not significant. The differences in the rates of ABG closure to ≤10 dB HL (p=0.030) and ≤20 dB HL (p=0.029) were significant. There were significant differences in improvements in the ABG at 3 kHz among the PORP, TORP, and T0 groups. Conclusions: The audiological outcomes of CWDM with ossiculoplasty seemed to be better than those of CWDM with T0 with no significant difference in the incidence of complications following ossiculoplasty and T0.

• Korean Journal of Audiology
• /
• v.25 no.2
• /
• pp.104-109
• /
• 2021

Background and Objectives: To assess whether the audiological and clinical outcomes of type 0 tympanoplasty (T0) performed using cartilage were comparable with those of ossiculoplasty in patients who underwent canal wall down mastoidectomy (CWDM). Subjects and Methods: This study included patients who had chronic otitis media with cholesteatoma and underwent CWDM with ossiculoplasty involving partial ossicular replacement prosthesis (PORP), total ossicular replacement prosthesis (TORP), or T0. Anatomical success rates and hearing outcomes were analyzed. Results: Seventy-two patients were included in this study; 29 of them underwent CWDM with T0, 27 underwent CWDM with PORP, while 16 underwent CWDM with TORP. The difference in mean improvement in the air-bone gap (ABG) between the groups was not significant. The differences in the rates of ABG closure to ≤10 dB HL (p=0.030) and ≤20 dB HL (p=0.029) were significant. There were significant differences in improvements in the ABG at 3 kHz among the PORP, TORP, and T0 groups. Conclusions: The audiological outcomes of CWDM with ossiculoplasty seemed to be better than those of CWDM with T0 with no significant difference in the incidence of complications following ossiculoplasty and T0.

• Advances in concrete construction
• /
• v.15 no.1
• /
• pp.63-74
• /
• 2023

All production and consumption activities produce wastes, which often cause damage to our environment and multiple risks to the human health. The valorization of these wastes in concrete technology is a future solution that will allow finding other construction materials sources, optimizing energy consumption and protecting the environment. Among these wastes, there is the marble waste. Every year, huge amount of marble waste is discarded as dust or aggregates form, in open-air storage areas causing serious problems for the environment and public health. In this context, the incorporation of marble waste as a replacement of ordinary aggregates or cement in concrete composition is actively investigated by researchers. This paper presents a comprehensive review of published studies over the last 20 years, dealing the effect of marble waste on fresh and hardened properties of concrete. Most of the studies carried out have used marble waste as dust with substitution rates between 5 and 20%. Besides the economic and ecological benefits, this review showed that marble waste can improve the physical, mechanical and durability properties of concrete. This improvement depends on the form (dust, fine aggregate or coarse aggregate), substitution method (as cement or aggregates replacement) and substitution rate of marble waste. Additionally, the review results showed that the use of 10-15% of marble waste dust as cement substitution can lead to increase the compressive strength.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.207-208
• /
• 2022

Since 1960, the green area has decreased due to rapid urbanization and the artificial surface has increased, and the repair and water function of the previous surface has decreased due to the decrease in rainwater absorption capacity. In addition, the risk of carbon dioxide and fine dust is emerging due to the use of fossil fuels due to urbanization. As a result, permeable blocks, an eco-friendly product, are in the spotlight. Therefore, this study was conducted to examine the strength properties of the permeable block using a hydroball. As a result of the experiment, the flexural strength and compressive strength tended to decrease as the hydroball replacement rate increased. It is judged that the hydroball absorbs a large amount of moisture during the mixing process and lacks moisture required for curing, resulting in a decrease in strength. According to KS F 4419, since the hydroball replacement rate is satisfied up to 20%, further research is needed to analyze the adsorption performance of air pollutants in the future and evaluate their utilization as a permeable block in the future.