• 대한안전경영과학회지
• /
• 제21권2호
• /
• pp.9-14
• /
• 2019

Gondola is widely used as a construction facility to perform external finishing work without using scaffolding at a construction site. However, since 2000, there have been 17 deaths from now so these risks associated with work can not be ignored. Therefore, it is expected that it will contribute greatly to prevent related disasters if introducing necessary measures to prevent repeated related disasters and installing additional safety devices. In order to eliminate the risk factor according to the operation of the gondola, it is necessary for the operator to use it to use it while the examination of each product is completed, and to use the over load Dangerous arbitrary measures such as arbitrary operation of the prevention device, removal of the safety fence for convenience of work, installation of the wire rope installed in the air, falling out of the wire rope and falling to the ground Do not perform such sealing measures so that any operation of the overload prevention device can not be done so as not to take such arbitrary measures, or wire the power supply wire to the safety fence so as not to delete the safety fence. Then, when the safety fence is removed, so that it does not become a gondola operation, or when replacing the wire rope in the air, to prevent the wire rope from coming off, Additional measures such as installing falling down prevention device may be necessary.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권2호
• /
• pp.89-100
• /
• 2000

Present study explains some experimental results on the aerodynamic noise of the cross-flow fan usually installed in the indoor unit of the room air-conditioners and provides a simple reduction method of radiating sound to decrease the total noise level. The spectra of the noise of the cross-flow fan were analyzed by the spectral decomposition method to characterize the generated sound. The unsteady fluctuating flow field was also measured using the I-type hot-wire probe. Comparing the spectral characteristics of the sound and the flow velocity, a useful noise reduction method was proposed, which bounds the region with a fence where the flow fluctuations were noticeably changed in the same fashion as the source spectral distribution functions vary. To validate the proposed method for reducing noise generated by the cross-flow fan, the sound pressure levels of the cross-flow fan system were compared with and without the bounding fence for various flow rates.

• 설비공학논문집
• /
• 제11권6호
• /
• pp.871-879
• /
• 1999

Present study explains some experimental results on the aerodynamic noise of the cross-flow fan usually installed in the indoor unit of the room air-conditioners and provides a simple reduction method of radiating sound to decrease the total noise level. The spectrums of the noise of the cross-flow fan were analyzed by the spectral decomposition method to characterize the generated sound. The unsteady fluctuating flow field was also measured using the I-type hot-wire probe. Comparing the spectral characteristics of the sound and the flow velocity, a useful noise reduction method was proposed which bounds the region with a fence where the flow fluctuations were noticeably changed in the same fashion as the source spectral distribution functions vary. To validate the proposed method for reducing noise generated by the cross-flow fan, the sound pressure levels of the cross-flow fan system were compared of the experimental rig with and without the bounding fence for various flow rates.

• Journal of Biosystems Engineering
• /
• 제34권1호
• /
• pp.63-68
• /
• 2009

This study was carried out to determine necessary conditions for optimal ventilation of small windowless piglet house (5.2 (W) ${\times}$ 12.3 (L) ${\times}$ 2.3 (H) m) with negative tunnel ventilating system using CFD (Computational Fluid Dynamics) simulation. The weaning piglet house for this experiment was consisted of 4 rooms (520 (W) ${\times}$ 300 (L) cm), 3 fences (70 (H) cm), 1 air inlet (350 (W) ${\times}$ 2 (H) cm) and 1 exhaust fan (50 (D) cm), and simulated using CFD code, FLUENT. The simulation results for the original weaning piglet house showed ununiform ventilation for each room. Therefore, to uniformly ventilate all rooms, the heights of the air inlet and first fence were modified to 3 cm and 100 cm, respectively. The simulation result f3r the modified weaning piglet house showed uniform ventilation for all rooms and the optimum air inlet velocity of 1.4 m/s.

• Wind and Structures
• /
• 제22권5호
• /
• pp.555-571
• /
• 2016

A hanging-type sand-retaining wall is a very common sand-blocking fence structure used to prevent sand movement. This type of wall is widely used along the Qinghai-Tibet and Gobi desert railways in Xinjiang, Western China. To analyze the characteristics of wind-sand flow fields under the effect of such a sand fence structure, a wind tunnel test and a field test were carried out. The wind tunnel test showed the zoning characteristics of the flow fields under the effect of the hanging-type sand-retaining wall, and the field test provided the sediment transport data for effective wind-proof interval and the sand resistance data in the front and behind the sand-retaining wall. The consistency of the wind-sand flow fields with the spatial distribution characteristic of wind-carried sand motion was verified by the correspondences of the acceleration zone in the flow field and the negative elevation points of the percentage variations of the sand collection rate. The spatial distribution characteristic of the field sand collection data further showed the spatial structural characteristic of the sandy air currents under the action of the hanging-type sand-retaining wall and the sand resistance characteristic of the sand-retaining wall. This systematic study on the wind-sand flow fields under the control of the hanging-type sand-retaining wall provides a theoretical basis for the rational layout of sand control engineering systems and the efficient utilization of a hanging-type sand-retaining wall.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.111.2-111
• /
• 2001

The research focuses on controlling a gap to measure the surface defect in semi-conductor fabrication device. The measurement is available accompanying a near field image gap control. In this article, a pneumatic servo system is adopted for the near field gap control. The advantage of the pneumatic servo system is on the preventing the possibility of contacting the device to the wapper surface, fence arising fatal damage. Furthermore, the air from the pneumatic system blows the some particle on the wapper during controlling. The target gap is less than 20 $\mu$m and the gap should keep same amount while the device moves around the surface. The experiment by the pneumatic servo control system is done by employing a simple PID control, and the tracking performance is remarkably verified. The target gap is set from 10 $\mu$m to 100 $\mu$m ...

• 한국전자파학회논문지
• /
• 제15권1호
• /
• pp.73-80
• /
• 2004

본 논문에서는 기존의 도파관 필터, 즉 내부가 공기로 채워진 밀리미터파 도파관 필터를 기본적인 도파관 변수 계산치로부터 일반 PCB 기판상에 구현하는 방법을 소개한다. 이를 위해서는 기존 도파관 필터의 구조에서 수직으로 배치된 모든 도체구조를(접지용 도체벽, 신호제어용 도체판) via를 사용해 대체해야 한다. 이를 위해 side wall과 도파관 내부 폴들을 via의 연속적인 나열과 via지름 크기의 조절을 통해 구현한다. 이를 통해 얻을 수 있는 장점은 사용될 기판 유전율의 제곱근에 비례하여 전체 크기가 x, y, z축으로 축소되며 특히 z축으로는 더 큰 축소가 가능하다. 또한 기존의 규모가 큰 금속성 도파관 필터를 제작할 필요없이 PCB상에 대량의 제작이 용이하기 때문에 훨씬 저렴하게 제작할 수 있다. 마지막으로 모듈의 소형화를 위해 요즘 한창 각광받는 LTCC 공정과 같은 다층기판 제작시 한층을 사용해 제작될 수 있다는 점에서 유리하다. 이 새로운 도파관 필터를 평가하기 위해 40 GHz 대역에서 2.5 %의 대역폭을 가지는 3차 chebyshev 대역통과필터가 사용되었으며 이에 사용된 PCB 기판은 유전율이 2.2이고 두께가 10 mil인 RT/duroid 5880이다. 설계 후 측정 결과 전체 입/출력단에서 삽입 손실이 2 ㏈ 정도이며 반사손실이 -30 ㏈ 이하의 우수한 특성을 얻을 수 있었다.

• 한국환경복원기술학회지
• /
• 제7권5호
• /
• pp.75-84
• /
• 2004

Loess, PAC, MACF and plants were applied to the control of the phytoplankton bloom in laboratory and in field, In field experiment using oil fence, 5ppm concentration of coagulant(PAC) was observed to be effective in controlling the cyanobacterial bloom, resulting in 90% removal of cyanobacteria and phytoplankton from the water column, hi case of Synedra sp., however, only 50% of biomass decreased with the same PAC concentration. MACF(micro-air bubble coagulation and floating), a kind of physicochemical method, was applied to the column of the Kyongan stream and resulted in over 80% chlorophyll a and 73.5% TP removal, Chlorophyll a and total phosphorus were effectively removed from water body when 2.0 g/L of loess with the particle radius of 125 ${\mu}m$ was inputted. In case of experiments involving plants, big cone pine, gingko, and pine needle were observed to be effective in restraining phytoplankton bloom at 0.5g/200ml level. During a field test done at Kyungan stream, where Microcystis heavily occurred, Pine needle and big cone pine were observed to be effective on suppressing algal growth.

• 한국화재소방학회논문지
• /
• 제26권3호
• /
• pp.60-66
• /
• 2012

본 연구에서는 건설현장 등에서 주로 사용되는 용접 절단기의 작업시 화재위험성을 평가하였다. 실험에는 인버터 AC/DC TIG 용접기와 인버터 에어프리즈마 절단기가 사용되었다. 용접 절단 작업시 비산되는 불티의 온도를 측정하였다. 작업높이와 입력전류의 변화에 따라 비산된 불티의 크기 및 비산범위를 측정하였다. 또한, 용접 절단기 화재원인 중 가장 높은 비율을 차지하는 가연물 근접방치에 의한 화재위험성을 평가하였다. 가연물로는 건초, 방진막, 우레탄폼, 비닐, 종이, 유류가 사용되었다. 용접 절단 작업시 불티의 온도가 최대 $450^{\circ}C$까지 상승하였다. 2.5 m 높이에서 절단 작업시 불티가 최대 4.7 m까지 비산되었다. 용접 절단 작업시 주위에 가연물이 존재할 경우 비산된 불티에 의해 가연물에 착화되어 화재로 발전할 가능성이 매우 높다.

• 환경생물
• /
• 제27권1호
• /
• pp.20-30
• /
• 2009

환경부지정 멸종위기 II급 종인 금개구리 (Rana plancyi chosenica)의 번식생태를 연구하기 위하여 충북 청원군 장내면에 위치하는 묵논형 습지에 있는 금개구리 개체군을 2007년 4월부터 2008년 11월까지 총 207일에 걸쳐서, 모음담장과 주머니함정을 설치하여 모니터링을 실시하였다. 금개구리들은 봄철 4월 20일부터 6월 13일 사이에 번식지로 이동하였으며, 가을철 동면지 이동은 9월 21일부터 11월 16일 사이에 일어났다. 서식지 내 외로의 이동은 2007년과 가을 이동과 2008년 봄 이동 시 공히 강수와 높은 양의 상관을 보였지만, 기온, 수온, 상대 습도와는 유의미한 상관관계를 보이지 않았다. 금개구리들은 이동 시 주로 논의 언덕이나 묵논과 연결된 이동경로를 다른 경로보다 선호하여 사용하는 것으로 나타났다. 번식지 내 외로의 이동순서와 개체의 신체 요소와는 2007년 봄에는 번식지 내 외로의 이동순서와 개체의 몸길이(snout-vent length)와 양의 상관을 보였으며, 이동순서와 몸무게와는 2008년 봄을 제외한 모든 경우에 양의 상관을 보여, 작은 개체들이 먼저 출현하고 먼저 동면지로 이주하는 경향을 보였다. 금개구리 암컷은 수컷에 비하여 유의미하게 큰 것으로 확인되었으며, 가을철 동면지 이주 시 20mm SVL 크기 이하의 작은 개체들의 수가 2007년, 2008년 공히 소폭 증가하여, 개체군 내에 성공적인 번식이 일어나고 있음을 알 수 있었다. 이러한 연구결과는 금개구리 야외 개체군을 보존하는 기초자료로 활용할 수 있을 것이다.