• 한국군사과학기술학회지
• /
• 제11권2호
• /
• pp.144-151
• /
• 2008

An experimental study has been conducted to investigate the effects of circular damage hole on the characteristics of airfoil performance. The damage on a wing created from a hit by anti-air artillery was modeled as a circular hole. Force balance measurements and static pressure measurements on the wing surface were carried out for the cases of having damage holes of 10% chord size at quarter chord and/or half chord positions. All experiments were conducted at Reynolds number of $2.85\times10^5$ based on the chord length. The surface pressure data show big pressure alterations near the circular damage holes. This abnormal surface pressure distribution produces shear stress that could lead to the acceleration of the structural degradation of the wing around the circular damage hole. However, in spite of the existence of circular damage holes, the measured force data indicated the only a slight decrease in lift accompanied by increase in drag compared to the results of undamaged one. The influence of damage hole on the aerodynamic performance was increased as the location of damage moved to the leading edge. The effect on the control force was insignificant when the damaged size was not large.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2064-2071
• /
• 2011

We are developing an innovative super-speed land transportation system running in a partial vacuum in tunnels with small inside diameter to reduce the aerodynamic drag forces. This paper presents the experimental results obtained on a small scale model when a super-speed train model passing through a tunnel with small inside diameter and a partial vacuum to reduce the aerodynamic drag forces. The experiments were performed on a 1/52-scale moving model rig in which a train model with a diameter of 58 mm and a length of 603 mm was accelerated in a launching tube with 12.27 m length by means of the compressed air launcher and then passed through a tunnel model with 17.149 m length. The partial vacuum was maintained in the tunnel in order to reduce the energy consumption of the propulsion system of the super-speed tube train at super-speed of 700 km/h. In this study, the blockage ratio of train to tunnel model is 0.336. Experimental results show the nonlinear effects of the vacuum on the speed-up of the train model in the tunnel model under the partial vacuum up to 0.21 atm and at the velocity up to 684 km/h. This paper is first study for experiments on the speed-up of a super-speed train model in the partial vacuum tunnels.

• 항공우주시스템공학회지
• /
• 제12권3호
• /
• pp.79-85
• /
• 2018

지구 재진입 비행체와 태양계 행성의 대기권 진입 비행체의 개발 요구가 증가하고 있다. 일반적으로 대기권 진입에는 대기 항력과 가열 환경이 동반하여 이에 따른 열보호 자재의 선정과 열보호 시스템의 설계와 적용이 매우 중요하다. 본 논문에서는 대기권 진입 환경과 우주 비행기의 열보호 자재의 종류와 특징을 고찰하였다. 그리고 우주비행기에 사용하는 열보호 시스템의 설계 및 활용 현황 등에 대하여 기술하였다.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.268-273
• /
• 2014

To investigate the turbulence characteristics within the boundary layer over a flat plate, an experimental study was performed using a PIV technique in a circular water channel. For two water velocities, 0.92 and 1.99 m/s, the water velocity profiles were taken and analyzed to determine turbulent characteristics such as the Reynolds stress, Taylor micro-length scale, and Kolmogorov length scale within the defect law region of the boundary layer. These analysis methods may be applied to research on the friction drag reduction technology using micro-bubbles or an air sheet over the surface of a ship's hull, because the physical reason for the friction drag reduction could be found by understanding the variation of the turbulence characteristics and structures in the boundary layer.

• 한국항행학회논문지
• /
• 제7권2호
• /
• pp.135-141
• /
• 2003

최근에는 비행 데이터를 이용하여 사고발생시, 원인 분석에 이용하는 것뿐만 아니라 여러 종류의 다양한 비행 데이터를 기록할 수 있는 QAR을 이용하여 운항 상황이나 항공기 시스템 상태를 다양하고 폭넓게 예견하여 사전 사고 방지 및 운항 성능 개선에 활용하고 있다. 이에, 본 논문에서는 실제 운항 후 QAR에 기록된 비행 데이터를 이용하여 운항 상황에서 발생된 순시적으로 변화하는 양항비를 추정하였다. 실제 B747-400의 비행 데이터가 기록된 QAR 데이터를 일반적인 항공기 운동방정식에 적용하여 양항비 추정 식을 유도하고 시뮬레이션을 통하여 결과를 검증하였다. 이를 통하여 양항비의 변화를 파악할 수 있으며, 과학적이고 경제적인 조종방법 등 체계적인 운항 성능 향상에 유용할 것으로 판단된다.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.48-54
• /
• 2016

In the present work, numerical simulations were conducted on the scaled model of the BWB type UCAV in the subsonic region using ANSYS FLUENT V15. The prediction method was validated through comparison with experimental results and the effect of the twisted wing was investigated. To consider the transitional flow phenomenon, ${\gamma}$ transition model based on SST model was adopted. The coefficients of lift, drag and pitching moment were compared with experimental results and the pressure distribution and streamlines were investigated. The twisted wing decreases the lift force but increases lift-to-drag ratio through delay of stall and leading edge vortex's movement to the front, also the non-linearity of the pitching moment is decreased.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1020-1025
• /
• 2002

This paper exploits how vortex noise is generated around a cylinder. This is done by utilizing an acoustic holography. In this experiment. compressed air was Infected to tile cylinder through a hose. Therefore, major noise sources were at a hose end as well as around the cylinder： vortex shedding noise. The holography results show a resultant noise picture there it is not easy to clearly sort out the shedding noise and what is generated at the end of the tube. We attempted to separate those noise by the method we developed : contribution analysis scheme. The method, in fact, was found to be efficient and practical to separate the noise field into independent noise sources. The highlights of the results are. we believe, that lift and drag noise picture are now available. This procedure does not limit its application. therefore we may use this to visualize any noise field that we want to understand.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.430-435
• /
• 2008

Total lengths of domestic pipe network for district heating system are above about 2,500Km. A lots of pumping power for heat transportation through long pipe are required by the flow friction of pipe surface. Until now there have been considered about various methods to reduce the flow friction for district heating system such as using surfactants and turbulence promoters by swirl flow and baffles etc. At this study, swirl flow generator was tested about the possibility to increase the heat transfer ratio at the heat exchanger in the case which the suppling water temperature increased from $50^{\circ}C$ until $120^{\circ}C$. Experimental results showed that the heat transfer ratio increased and also pressure increase ratio increased simultaneously in the case which swirl flow generator installed. The amount of the increasing ratio for heat transfer and pressure were reached until 4.33% and 11% at the case of $120^{\circ}C$ suppling temperature which domestic district heating system were using.

• 대한조선학회논문집
• /
• 제55권4호
• /
• pp.330-340
• /
• 2018

In the present works, the High-speed Cavitation Tunnel (HCT) has been designed and manufactured to have the large test section to conduct various supercavitation experiments. The large amount of air ventilated behind a cavitator produces lots of tiny bubbles, which prevent clear observation of supercavitation at the test section. To collect small bubbles effectively, a bubble collecting section of large volume is equipped upstream of the test section. HCT has the test section dimension of $0.3^H{\times}0.3^W{\times}3.0^L\;m^3$ and provides maximum flow speed of 20.4 m/s at the test section. The blockage and Froude effects on the ventilated supercavitation are investigated successfully at the test section. The basic studies such as the supercavitation evolution, drag measurements and cavity shape extraction with air flow rate are also carried out in HCT.

• 한국항공우주학회지
• /
• 제40권2호
• /
• pp.184-191
• /
• 2012

최적설계 프레임워크를 구성하여 미사일 개념설계 단계에 필요한 공력해석(DATCOM)과 RCS 해석(POFACETS) 프로세스를 통합하였다. 미사일 형상정의는 제작과 설계의 동시성과 형상정보 산출 등을 목적으로 CAD(CATIA)를 기반으로 하였다. 정의된 형상정보가 자동적으로 해석 프로세스에 입력되도록 ModelCenter를 이용하여 프로세스들을 연결 하였다. 군요구도 정립부터 요구도 평가를 거쳐 미사일 설계 기준형상을 선정하였고, 양항비를 망대 구속조건으로 하여 RCS 최소화 최적설계를 실시하였다. 본 논문에서 구성한 최적설계 프레임워크를 이용하여 미사일 개념설계 단계에서 여러 미사일 형상들에 대한 효율적인 분석과 다양한 설계 전략을 구현할 수 있음을 확인하였다.