• Korean Journal of Remote Sensing
• /
• v.29 no.2
• /
• pp.235-241
• /
• 2013

$NO_2$ vertical column densities were retrieved via ground based Multi-Axis Differential Optical Absorption Spectroscopy (MAX-DOAS) measurements for the first time for 6 months over the spring season in 2007 and 2008 in Seoul, one the megacities in the Northeast Asia. The retrieved $NO_2$ vertical column densities were compared with those obtained from space borneOzone Monitoring Instrument (OMI). Over the entire measurement period, the $NO_2$ vertical column densities measured by MAX-DOAS ranged from $1.0{\times}10^{15}molec{\cdot}cm^{-2}$ to $6.0{\times}10^{16}molec{\cdot}cm^{-2}$ while those obtained by OMI ranged $1.0{\times}10^{15}molec{\cdot}cm^{-2}$ to $7.0{\times}10^{16}molec{\cdot}cm^{-2}$. The correlation coefficient between $NO_2$ vertical column densities obtained from MAX-DOAS and OMI is 0.73 for the entire measurement period whereas the correlation coefficient of 0.85 is found for the dates under the clear sky condition. The cloudy condition is thought to play a major role in increase in uncertainty of the retrieved OMI $NO_2$ vertical column densities since air mass factor may induce high uncertainty due to the lack of cloud and aerosol vertical distribution information.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.17-27
• /
• 1996

This study was designed to survey exposure levels of formaldehyde among workplaces in some plywood industries and to compare three sampling methods including the impinger method(IM, NIOSH method No. 3500), the solid sorbent tube method(SS, NIOSH method No. 2541), and the passive bubbler monitor method(PB, SKC). The survey was conducted in seven particle board manufacturing factories, two resin manufacturing factories and two plywood manufacturing factories in Incheon area during the period from March 6 to April 20, 1995. The workplaces included were the hot/cold press, the roller/spreader, the soaking/drying, and the reaction/mixing areas. The results were as follows; 1. The average(GM, GSD) concentrations of formaldehyde by sampling methods were 0.11(4.43) ppm by IM, 0.27(2.03) ppm by SS, and 0.29(2.04) ppm by PB, respectively. The concentrations by 1M method were statistically very significantly lower than those of SS and PB methods, particularly at low air borne concentrations of formaldehyde (p<0.001). 2. The area average concentrations of formaldehyde by workplaces measured with PB bubblers were 0.23(2.08) ppm from the press, 0.23(1.77) ppm from the spreader, 0.24(1.51) ppm from the soaking, and 0.46(1.96) ppm from the reaction areas, respectively. The personal average concentrations of formaldehyde by workplaces measured with PB bubblers were 0.30(1.77) ppm from the press, 0.33(1.54) ppm from the spreader, 0.36(1.46) ppm from the soaking, and 0.84(1.19) ppm from the reaction areas, respectively. 3. No statistically significant differences of formaldehyde concentrations among workplaces except the reaction area(p<0.001) were found. 4. Formaldehyde concentrations from personal samples were higher than those of from area sam pies in all workplaces studied. But no statistically significant differences of formaldehyde concentrations both area and personal samples were found. In conclusion, this study found that although formaldehyde concentrations in some plywood industries in Incheon area were below the regulatory limit of 1 ppm, they were over the limits recommended by NIOSH and ACGIH. This study also suggests that the impinger method may underestimate true formaldehyde concentrations. It implies that there will be more workplaces not meeting current regulatory limit if either the solid sorbent or passive bubbler methods were used instead of the impinger method. It is suggested that passive monitors will be a reasonable alternative for area and personal sampling of formaldehyde if the accuracy and validity of passive monitors be verified before use.

• Geophysics and Geophysical Exploration
• /
• v.17 no.3
• /
• pp.129-136
• /
• 2014

Electromagnetic (EM) methods are generally divided into frequency-domain EM (FDEM) and time-domain EM (TDEM) methods, depending on the source waveform. The FDEM and TDEM fields are mathematically related by the Fourier transformation, and the TDEM field can thus be obtained as the Fourier transformation of FDEM data. For modeling in time-domain, we can use fast frequency-domain modeling codes and then convert the results to the time domain with a suitable numerical method. Thus, frequency-to-time transformations are of interest to EM methods, which is generally attained through fast Fourier transform. However, faster frequency-to-time transformation is required for the 3D inversion of TDEM data or for the processing of vast air-borne TDEM data. The diffusion expansion method (DEM) is one of smart frequency-to-time transformation methods. In DEM, the EM field is expanded into a sequence of diffusion functions with a known frequency dependence, but with unknown diffusion-times that must be chosen based on the data to be transformed. Especially, accuracy of DEM is sensitive to the diffusion-time. In this study, we developed a method to determine the optimum range of diffusion-time values, minimizing the RMS error of the frequency-domain data approximated by the diffusion expansion. We confirmed that this method produces accurate results over a wider time range for a homogeneous half-space and two-layered model.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.1
• /
• pp.61-70
• /
• 2007

This study was conducted to investigate nutrient dynamics and water quantity of throughfall and stemflow in natural oak stands in Korea. The ratio of the total throughfnll and stemflow to the amount of precipitation varied with locations. It was considered that the ratio was affected not only by the characteristics of tree species but also by regional, weather and other environmental conditions. It was, therefore, necessary to set up a water control system to launch a tending project for natural oak stands. Comparisons of nutrient amount in throughfall among regions reflected regional characteristics. $Ca^{2+},\;Mg^{2+}$ and $K^+$ ions were leached from the canopy and yellow sand accumulation. $Na^+$ and $Cl^-$ were marine-borne. $NO_3^-$ and $SO_4^{2-}$ resulted from dry deposition of air pollutants. Nutrient amount in the stemflow was as low as about 10% of that in the total throughfall and stemflow. The pH of stemflow in natural oak stands in urban areas ranged from 3 to 5. Influx of the acidic stemflow to soil could, in the long term, affect pH in soil solution and nutrient dynamics around root zones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3578-3585
• /
• 2012

The purpose of this study was to establish the critical limit at CCP (Critical Control Point) of HACCP (Hazard Analysis Critical Control Point) system for instant noodle and it was conducted at P company in Ichen(Gyeonggi-do), Korea. According to the CCP, Fried process were experimented to removal and decrease of microbiological and chemical hazards by measuring of each temperature and times. As a result, the standard plate count and pathogenic microorganism were not detected by fried processing (Temperature : $145{\pm}10^{\circ}C$, Time : $75{\pm}30$ sec). The acid value of chemical hazards produced by fried processing was able to manage, showed lower (0.2) than the legal limit (0.6). Air-borne bacterial examination results detected(3 CFU/mL, 3 CFU/mL) in the Frying Room and Steam Room. Therefore, the CCP-BC of fried process would be a great alternative to prevent and remove hazard analysis, such as general and pathogenic microorganism (E. coli O157:H7, B. cereus, Listeria monocytogenes, Salmonella spp, Sthaph. aureus etc), chemical hazard analysis. In conclusion, it suggested that HACCP plan was necessary for management standard and systematic approach in establishement of critical limit, solving the problem, method of verification, education and records management by fried processing.

• Journal of Korean Society on Water Environment
• /
• v.35 no.3
• /
• pp.224-233
• /
• 2019

Nitrogen components in liquid manure can reduce safety and quality of environment harmfully. To minimize the environmental risks of manure, understanding fate of manure in environment is necessary. This study aimed at investigating applicability of a simplified Level III fugacity model for simulating $NH_3-N$ component to analyze environmental fate and transport of $NH_3-N$ in liquid manure and to provide basis for improving management of N in the liquid manure system and for minimizing the environmental impacts of N. The model simulation conducted for four environmental compartments (air, water, soil, and rice plants) during rice-cropping to trace $NH_3-N$ component and provided applicability of the Level III fugacity model in studying the environmental fate of $NH_3-N$ in manure. Most of $NH_3-N$ was found in water body and in rice plants depending upon the physicochemical properties and proper removal processes. For more precise model results, the model is needed to modify with the detailed removal processes in each compartment and to collect proper and accurate information for input parameters. Further study should be about simulations of various N-typed fertilizers to compare with the liquid manure based on a modified and relatively simplified Level III fugacity model.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.69-74
• /
• 2013

This study has been performed for 150 days from February 1 - June 31, 2012 aiming at analyzing biologically hazardous factors in order to develop HACCP system for the vinegared pickle radishes. A process chart was prepared as shown on Fig. 1 by referring to manufacturing process of manufacturer of general vinegared pickle radishes regarding process of raw agricultural products of vinegared pickle radishes, used water, warehousing of additives and packing material, storage, careful selection, washing, peeling off, cutting, sorting out, stuffing (filling), internal packing, metal detection, external packing, storage and consignment (delivery). As a result of measuring Coliform group, Staphylococcus aureus, Salmonella spp., Bacillus cereus, Listeria Monocytogenes, E. coli O157:H7, Clostridium perfringens, Yeast and Mold before and after washing raw radishes, Bacillus cereus was $5.00{\times}10$ CFU/g before washing but it was not detected after washing and Yeast and Mold was $3.80{\times}10^2$ CFU/g before washing but it was reduced to 10 CFU/g after washing and other pathogenic bacteria was not detected. As a result of testing microorganism variation depending on pH (2-5) of seasoning fluid (condiment), pH 3-4 was determined as pH of seasoning fluid as all the bacteria was not detected in pH3-4. As a result of testing air-borne bacteria (number of general bacteria, colon bacillus, fungus) depending on each workplace, number of microorganism of internal packing room, seasoning fluid processing room, washing room and storage room was detected to be 10 CFU/Plate, 2 CFU/Plate, 60 CFU/Plate and 20 CFU/Plate, respectively. As a result of testing palm condition of workers, as number of general bacteria and colon bacillus was represented to be high as 346 $CFU/Cm^2$ and 23 $CFU/Cm^2$, respectively, an education and training for individual sanitation control was considered to be required. As a result of inspecting surface pollution level of manufacturing facility and devices, colon bacillus was not detected in all the specimen but general bacteria was most dominantly detected in PP Packing machine and Siuping machine (PE Bulk) as $4.2{\times}10^3CFU/Cm^2$, $2.6{\times}10^3CFU/Cm^2$, respectively. As a result of analyzing above hazardous factors, processing process of seasoning fluid where pathogenic bacteria may be prevented, reduced or removed is required to be controlled by CCP-B (Biological) and threshold level (critical control point) was set at pH 3-4. Therefore, it is considered that thorough HACCP control plan including control criteria (point) of seasoning fluid processing process, countermeasures in case of its deviation, its verification method, education/training and record control would be required.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.5
• /
• pp.554-563
• /
• 2006

Background: PM is known to induce various pulmonary diseases, including asthma, cancer, fibrosis and chronic bronchitis. Despite the epidemiological evidence the pathogenesis of PM-related pulmonary diseases is unclear. Methods: This study examined the effects of PM exposure on the secretion of $TNF-{\alpha}$ and $IL-1{\beta}$ in the cultured alveolar macrophages. The cultured primary alveolar macrophages were treated with the medium, PM ($5{\sim}20{\mu}g/cm^2$), LPS (5ng/ml), and PM with LPS for 24h and 48h respectively. ELISA was used to assay the secreted $TNF-{\alpha}$ and $IL-{\beta}$ in the culture medium. Western blotting was used to identify and determine the level of proteins isolated from the culture cells. The cells cultured in the $Lab-Tek^{(R)}$ chamber slides were stained with immunocytochemical stains. Results: PM induced $TNF-{\alpha}$ and $IL-1{\beta}$ secretion in the culturing alveolar macrophages, collected from the SPF and inflammatory rats. However, the effects were only dose-dependent in the inflammatory macrophages. When the cells were co-treated with PM and LPS, there was a significant synergistic effect compared with the LPS in the both cell types. Conclusion: PM might be play an important role in the induction and/or potentiation of various lung diseases by oversecretion of $TNF-{\alpha}$ and $IL-1{\beta}$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.242-253
• /
• 1998

South Korea has been producing asbestos over 60 years. The use of asbestos was over 50 years for production of asbestos slate and 27 years for asbestos friction materials including asbestos textile and brake-lining. Thus, it can be supposed that asbestos related diseases such as asbestosis, lung cancer and mesothelioma could be found in the vulnerable workers exposed to asbestos in 1955-1975, given the average latency period of 10-30 years. Asbestos was produced primarily by Japanese during World War II In Korea. The production of chrysotile peaked to 4,815 tons in 1944. From 1978 to 1984, 10,000 tons of asbestos were produced annually. However, the production was interrupted by raising labor costs and extinction of mine reserves, and finally they had to depend on import for the need of asbestos. In 1945, there were 16 asbestos mines, in total, with the addition of new asbestos mines in South Korea. Imports of asbestos was increased from 74,000 tons to 95,000 tons during the period of 1976 - 1992. But the imports was reduced to 88,000 tons in 1995. Since, in addition to the import of asbestos itself, the imports of asbestos products were increased as well and the accumulation of asbestos reached to 30,000 tons during the period of 1964 to 1993. In 1965, there was only one asbestos company with 207 employees. But the size of asbestos industry has been expanded so much that 118 asbestos companies could be found in 1993 with 1,476 workers. However, there was no record on the survey of asbestos concentration to which workers were exposed in any companies in 1983. The record of the air-borne concentration of the asbestos in textile working places in 1984 showed 6.7 fibers/cc by geometric mean(GM), but it was reduced to 1.2 fibers/cc in 1993. GMs of asbestos in working places for construction materials and asbestos textiles were also decreased from 1.7 fibers/cc to 0.55 fibers/cc during the period of 1984 - 1996.

• Korean Journal of Remote Sensing
• /
• v.28 no.1
• /
• pp.11-19
• /
• 2012

Air-borne pollen, biogenically created aerosol particle, influences Earth's radiative balance, visibility impairment, and human health. The importance of pollens has resulted in numerous experimental studies aimed at characterizing their dispersion and transport, as well as health effects. There is, however, limited scientific information concerning the optical properties of airborne pollen particles contributing to total ambient aerosols. In this study, for the first time, optical characteristics of pollen such as aerosol backscattering coefficient, aerosol extinction coefficient, and depolarization ratio at 532 nm and their effect to the atmospheric aerosol were studied by lidar remotes sensing technique. Dual-Lidar observations were carried out at the Gwangju Institute of Science & Technology (GIST) located in Gwagnju, Korea ($35.15^{\circ}E$, $126.53^{\circ}N$) for a spring pollen event from 5 to 7 May 2009. The pollen concentration was measured at the rooftop of Gwangju Bohoon hospital where the building is located 1.0 km apart from lidar site by using Burkard trap sampler. During intensive observation period, high pollen concentration was detected as 1360, 2696, and $1952m^{-3}$ in 5, 6, and 7 May, and increased lidar return signal below 1.5km altitude. Pollen optical depth retrieved from depolarization ratio was 0.036, 0.021, and 0.019 in 5, 6, and 7 May, respectively. Pollen particles mainly detected in daytime resulting increased aerosol optical depth and decrease of Angstrom exponent.