• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2178-2187
• /
• 2015

Bluetooth Low Energy (Bluetooth LE) is a representative break-through communication technology for wireless personal area networks on nowaday. In this environment, most of significant performance should be aiming to energy efficiency due to the policy for manufacturing light-weighted communication devices derived from requirement of world IoT market, and many researches have been developed to satisfy this requirement. While Bluetooth LE has been leading the low power communication technology required from the current market by employing duty cycle and frequency hopping approaches, it couldn't address the problem of reliability on broadcast transmissions. The main goal of this paper is aiming to addressing this problem by suggesting a new method. Furthermore analytic evaluations would also be proceeded to find objective results in the view point of broadcast transmission efficiency from Master device.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.3
• /
• pp.1-15
• /
• 2021

Objective: The purpose of this study was to examine the differences in joint position sense (JPS), force sense (FS), and performance level of the upper extremities according to the injury and pain experiences of Korean elite archers. Methods: A total of 15 subjects were briefed about the purpose of this study and agreed to participate voluntarily. JPS was evaluated using the laser-point attached to the wrist while aiming at the target. The difference when relocating while aiming was used as JPS factor. FS was evaluated using load cell through reproduces same muscle strength. Fear-Avoidance Beliefs Questionnaire (FABQ) was used to evaluate psychosocial factors, Kerlan-Jobe Orthopedic Clinic overhead athlete scores (KJOC) and numerical rating scale (NRS) was used to evaluate pain. and performance was evaluated by tournament match score. Results: There is a strong correlation between the current pain and KJOC. Moreover, moderate correlation between KJOC and FABQ also current pain and both upper trapezius and lower trapezius in elite archers. The mean (SD) between groups based on current pain display relatively large margin in force sense than without pain group. The result presents that there is a significant difference in performance and pain. There is a significant difference in the force sense of the upper and lower trapezius and pain. Conclusions: Result present there is a significant difference in functional level in the average comparison between groups according to the presence of absence of current pain. There is a significant difference in the force sense of the upper trapezius as well as lower trapezius and without pain group present a relatively low joint position sense error compared to the groups.

• Journal of Information Technology Services
• /
• v.11 no.2
• /
• pp.185-196
• /
• 2012

The rapid evolution of ICT industry brings not only new services or products but also changes from common individual life to whole human society. Coping with these situations and survival, companies cannot help regarding R&D as the most important thing. So, discovering R&D projects which are suitable for the alternation is a big issue for many companies. To resolve the issue, KT has adopted Innovative Management Methodology developed by Strategos, which is co-founded by Gary Harmel. This paper describes this Innovative Management Methodology tailored to KT R&D. The methodology consists of five phases : focusing discovery, discovery, ideas/domains, domain elaboration & aiming point and R&D project proposal. Also, it shows some interim findings that came from the Innovative Management Process. Finally, the future plan for elaborating the methodology itself and generating new R&D projects is suggested.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.517-522
• /
• 2005

This paper addresses scheduling heuristics for an assembly job-shop that includes at least an assembly process throughout its processes. The assembly job shop has certain characteristics not only considering the precedence relationship between the processes but also considering the processing progress between the parts. In addition, it probably presents a different processing time for the same product according to the order of processes and the point of workable time, due to the difference in the availability of equipments. The paper proposes several priority-based dispatching rules that consider these characteristics of the assembly job-shop, aiming to minimize the total tardiness of products in the shop floor. Computational tests showed that job due date based priority rules significantly outperform existing priority rules in terms of total tardiness.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.16 no.2
• /
• pp.135-151
• /
• 2005

In accordance with changes in life style, people's desire to eat out is getting changed in their preferring factors from whether they can buy food they want to eat fast and easily to mood of the dining space, content and quality of service, hygiene condition of restaurant, quiet location and surrounding circumstance, and discount coupon and price destruction. In addition, consumers who begin to recognize the seriousness of environmental pollution prefer health-oriented food. On the other hand, excessive presence of competitors, growing personnel expense, increasing expenditure in accordance with swelling price of rent and material expenditure, increase of tax burden, decrease of income because of credit card service charge and high expected level by consumers make it difficult for restaurant's owners to manage restaurant business. Therefore, this study purposes to establish development of menu from the consumer's and the supplier's point of view and propose how to develop menu aiming at convenience, health and diversity.

• The Journal of Fisheries Business Administration
• /
• v.13 no.1
• /
• pp.47-61
• /
• 1982

This paper first makes a survey of fishing household economy which possess fishing boats under 10 gross Tons by a questionnaire, and makes a comparative study of major indicators of fishing household economy between Korea and Japan, and finally suggests some policies for the fisheries management. Major indicators are the status of fishery household members, number of fishing boats which possess, fisheries incomes, fishing household incomes, side business incomes of fishing household, disposal incomes, living expenses, sufficient degree of living cost, average propensity to consumption and so on. Some policies for improvement in fishing household incomes are suggested in the paper as follows: ⑴ Form a policy similar to a project aiming for increasing the income of fishermen so that the side business income will also increase. ⑵ The point of view in tracing origin of low productivity. ⑶ It has drawn up a plan to encourage saving after analyzing the cause of high propensity to consumption. ⑷ The paper is aimed to collect basic statistical materials for fisheries administration.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.12
• /
• pp.1022-1032
• /
• 1989

King Sejong's Striking Clepsydra was an elaborate timekeeping and annunciating system incorporating biological automata capable of annunciating hours, intervals and night-watches based on Shou-shih calindrical systems automatically. In this paper the author has studied the original manuscripts on the Striking Clepsydra [Sejong sillock, 65: 1a-3b ff` 16th year, 7th month(1434)] from the technical point of view undertaking a close analysis of this monumental clock and aiming to our modern understanding of the full degree of delicate mechanisms and sophisticated controls built into the night-watch and division announcing clockwork(jackwork). Based on the input/output model, timekeeping, ball-rack, ball-relay, and audible time-indicating mechanisms were synthesized reconstructing night-watch annunciating systems. It revealed that the night-watch and division announcing processes were entirely renewed automatically. Historical and philological data concerning the improvements of the proposed model were discussed.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.323-332
• /
• 1996

The current speech technology has been aiming to acquire much clearer and more natural synthetic speech sound. The naturalness can be developed by an adequate phrasing of target sentence, of course, which seems to be strongly related to both syntactic and phonetic aspect simultaneously. The present study aims to describe, at one aspect, the relatedness between syntactic structure and prosodic phrasing through dialogue speech, and at the other, to establish a suitable phrasing pattern with respect to the purpose of acquiring more natural synthetic sound. The prosodic phrase, here, means a prosodic unit which can be clearly identified as having an evident break boundary at its final position in a sentence in the sense of both perceptual and acoustical viewpoint. The end of each prosodic phrase is, accordingly, marked as the point of major boundary in a sentence.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.4
• /
• pp.38-44
• /
• 2012

This paper presents experimental studies aiming at evaluation of structural behaviors of RC (Reinforced Concrete) beams externally strengthened with taper ended CFRPs(Carbon Fiber Reinforced Polymers). Experiments are performed with RC beams having different numbers of CFRP layers and length of each layer. The beams are subjected to four point-bending with simply supported condition. Test results of taper ended CFRPs and non-tapered CFRPs are compared and the better strengthening effect is observed from tapered ended CFRPs.

• Korean Security Journal
• /
• no.2
• /
• pp.193-210
• /
• 1999

Through the case study, this thesis suggests several methods to prevent the assassination attempt on V.I.P. by examining what makes assassin assassinate V.I.P. and analyzing various kinds of motive and type. The paper, aiming to prevent assassination on V.I.P. consists of four chapters. Chapter I, the introductory chapter of this thesis, describes regarding the V.I.P. protection environment surrounding our nation. Chapter II concerns various kinds of motive and type of assassination. Under the title 'Point and Provision of Assassination' , chapter III shows several example case studies on assassinations occurred in our nation and foreign countries and suggests it's points and the lesson these case studies give us. The fourth chapter concludes with a bibliography. The conclusion of this study can be summarized in a word as following proverb; 'Providing is Preventing'.