• 한국양봉학회지
• /
• 제33권4호
• /
• pp.261-268
• /
• 2018

Queen honey bees (Apis cerana) can be reared artificially on demand by the use of grafting technique. The technique consists of grafting young worker larvae into queen cell cups and raising in a queenless strong colony. As the age of grafted larvae for queen rearing exhibited several aspects related to quality and reproductive potential of queen, this study were conducted to investigate the influence of age of grafted larva on morphological characteristics and lifespan of queen, and the growth of colony she headed. Our results demonstrated that queens reared from young worker larvae (i.e., less than 1-day old larvae) were significantly larger in size (i.e., body weight and thorax width) than that of queens reared from 2-day old worker larvae. Moreover, queens reared from younger worker larvae initiated egg-laying earlier, stored more spermatozoa in spermatheca and had a longer lifespan compared to queens raised from older worker larvae. We also found a significant positive effect of queen grafting age on the production of worker and drone brood, adult worker population in colonies headed by queens reared from younger larvae. These findings suggested that rearing queens from brood grafted at the earliest possible age could increase the reproductive potential of queen as well as fitness of colony she head.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.417-424
• /
• 2002

This study was conducted to develop a vehicle, leading or following a worker at a certain distance to assist laborious transporting works in greenhouses. A prototype vehicle was tested in the practical field conditions using a developed control algorithm. Results of this study were summarized as following: 1. The sensing device consisted of infrared sensors was attached to the front of the vehicle and turning following algorithm was developed to make the vehicle turned as it follows a worker simultaneously. 2. The measured average power consumptions were 110W and 89W, equivalent to 5.2-6.4 hrs battery durations, at low speed with and without the maximum payload, respectively. 3. Results of the travel tests showed that the deviations from the center of row spacing were $\pm$100 mm along the ridge and $\pm$85 mm along the hydroponic bed in the greenhouse. Therefore, the worker-following transport vehicle was feasible to travel along the row without collision in the greenhouse.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제27권2호
• /
• pp.271-276
• /
• 2013

The Asian honeybee, Apis cerana, is a native honeybee species in Korea which is important in agriculture for pollination and honey production. For better understanding of the physiology of A. cerana, high-throughput Illumina transcriptome sequencing was performed to analyze the gene expression profiles of queen, worker, and larva. A total of 219,799,682 clean reads corresponding to 22.2 Gb of nucleotide sequences was obtained from the whole body total RNA samples. The Apis mellifera reference mRNA sequence database was used to measure the gene expression level with Bowtie2 and eXpress software, and the Illumina short reads were then mapped to 11,459 out of 11,736 A. mellifera reference genes. Total of 9,221 genes with FPKM value greater than 5 of each sample group were subjected to eggNOG with BLASTX for gene ontology analysis. The differential gene expression between queen and worker, and worker and larva were analyzed to screen the overexpressed genes in each sample group. In the queen and worker sample group, total of 1,766 genes were differentially expressed with 887 and 879 genes overexpressed over two folds in queen and worker, respectively. In the worker and larva sample group, total of 1,410 genes were differentially expressed with 1,009 and 401 genes overexpressed over two folds in worker and larva, respectively.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.409-416
• /
• 2002

This study was conducted to develop a vehicle, leading or following a worker at a certain distance to assist laborious transporting works in greenhouses. A prototype vehicle, which consisted of the rear driving, the front steering and the console units, was designed and tested in the ideal indoor conditions. Results of this study were summarized as following: 1. The driving unit was designed to travel at the speed ranges of 0.3∼0.8 m/sec depending on the operating modes with a maximum payload of 100 kg. 2. The console unit consisted of a main-board including a 80C196KC microprocessor and peripheral devices, a power-board and safety interlock. Worker-leading, and following modes were available in automatic and manual modes. 3. Steering was achieved by turning the steering motor against the sensed direction. Proper steering angles for correcting travel direction were determined as 5 and 9 degrees when sensing cultivation beds and plants, respectively.

• Toxicological Research
• /
• 제30권4호
• /
• pp.277-282
• /
• 2014

To develop a composition for enhancing immunity, based on alcohol extracts of the bumblebee as an active ingredient, bumblebee ethanol extracts were evaluated for their protective effect in chronic models of inflammation, adjuvant induced rat arthritis. B. terrestris worker extract (SDIEX) and, B. hypocrita sapporoensis lava and pupa extract (SPDYBEX), significantly decreased paw edema in arthritic rats, at a dose 100 mg/kg, respectively. The cytokine levels related inflammation of COX-2, $sPLA_2$, VEGF, and TNF-${\alpha}$, were decreased, compared to positive control, indomethacin (5 mg/kg). Histopathological data demonstrated decreases inflammatory activity, hind paw edema, and repaired hyaline articular cartilage in DRG over a 2 wk administration. HPLC and GC-MS analysis of SDIEX and SPDYBEX revealed the presence of cantharidin.

• 농업과학연구
• /
• 제42권2호
• /
• pp.117-124
• /
• 2015

In forest work, working conditions are very hard to improve. The good posture is believed to bring about direct improvements such as accident prevention. Therefore, this research carried on analysis of working posture in forest work (construct in stepping-stone) using OWAS analysis system. According to the analytical results provided by OWAS, the ratio of category III (Work posture has a distinctly harmful effect on the musculoskeletal system) has shawn that worker 2 was 32.2%, worker 1 was 25.2% and worker 3 was 15.5%. Furthermore, the ratio of category IV (Work posture with an extremely harmful effect on the musculoskeletal system) has shown that worker 2 was 9.8%, worker 3 was 1.4% and worker 1 was 1.2%. According to the OWAS method, percentage of OWAS action categories III and IV in the worker 2 was higher than another workers.

• 농촌지도와개발
• /
• 제20권2호
• /
• pp.383-405
• /
• 2013

본 연구의 목적은 농촌지도사의 직무별로 관련성 있는 역량을 도출하고자 하였으며 이를 위해 농촌지도사의 직무와 개별역량 간의 대응분석을 실시하였다. 분석결과 농촌지도사의 지도기획 직무는 '문제해결' 및 '아이디어 창출' 역량과 관련성이 높게 나타났으며, 생활개선 교육 직무는 '지도사업평가', '고객지향성' 및 '이해력' 역량과 관련성이 높게 나타났고, 작물기술보급 직무는 '현장지도' 및 '책임성' 역량과 관련성이 높은 것으로 분석되었다. 본 연구에서는 이러한 분석결과를 바탕으로 향후 농촌지도사들의 역량강화를 통한 직무의 효과성을 제고하기 위하여 직무별로 관련성이 높게 나타난 역량들에 대한 중점적인 교육이 실시될 필요성을 제시하였다. 또한 신규지도사의 최초 직무 배치시 개별역량의 측정 결과를 바탕으로 적정한 직무에 배치할 수 있는 기초자료로 활용하고자 하였다.

• 농업과학연구
• /
• 제40권3호
• /
• pp.209-214
• /
• 2013

This study examined the work time, work posture, and work intensity for the actual measurement step in forest road the design work that was being carried out. The measurement of the forest road was being carried by a team of three workers and a team of four workers. The examination of work time found that the measurement of 1km took about 8 hours for the four-worker team and 12 hours for the three-worker team. The examination of work intensity found that the energy metabolic rates of the three-worker team were lower than four-worker team. Because their energy consumption per minute decreased as their work time and rest time increased. Furthermore, when appropriate rest time was applied according to work time, the energy metabolic rate decreased and the work intensity became lower. The four-worker team was more advantageous from the time and cost aspects of the forest road measurement work. Furthermore, as the rest time was very low compared to the work time, more efficient forest road measurement work would be possible if the work intensity was lowered by considering the rest time when calculating the standard work time.

• Journal of Biosystems Engineering
• /
• 제38권1호
• /
• pp.33-40
• /
• 2013

Purpose: The goal of this study was to build an accurate digital factory that evaluates the performance of a factory using computer simulation. To achieve this goal, we evaluated the effect of worker-related variables on production in a simulation model using comparative analysis of two cases. Methods: The overall work process and worker-related variables were determined and used to build a simulation model. Siemens PLM Software's Plant Simulation was used to build a simulation model. Also, two simulation models were built, where the only difference was the use of the worker-related variable, and the total daily production analyzed and compared in terms of the individual process. Additionally, worker efficiency was evaluated based on worker analysis. Results: When the daily production of the two models were compared, a 0.16% error rate was observed for the model where the worker-related variables were applied and error rate was approximately 5.35% for the model where the worker-related variables were not applied. In addition, the production in the individual processes showed lower error rate in the model that included the worker-related variables than the model where the worker-related variables were not used. Also, among the total of 22 workers, only three workers satisfied the IFRS (International Financial Reporting Standards) suggested worker capacity rate (90%). Conclusions: In the daily total production and individual process production, the model that included the worker-related variables produced results that were closer to the real production values. This result indicates the importance of worker elements as input variables, in regards to building accurate simulation models. Also, as suggested in this study, the model that included the worker-related variables can be utilized to analyze in more detail actual production. The results from this study are expected to be utilized to improve the work process and worker efficiency.

• 대한인간공학회지
• /
• 제30권4호
• /
• pp.535-540
• /
• 2011

Objective: The aim of this paper is to survey the gender differences Work-related musculoskeletal disorders among agriculture workers. Background: The number of occupational injuries has been decreasing trend in Korea, but it has been increasing in agriculture. The ratio of women worker shows steady increasing trend among the agricultural worker in Korea. Method: This study investigated through the questionnaire to 358 agricultural workers who are working for agriculture located in Gyeongnam, Gyeongbuk and Jeju. Results: The task types occurring frequently and the weight of a heavy object handled according to the sex were showed statistically significant difference. The estimation of WMSDs patients by sex appeared statistically very significant difference. Conclusion: The prevalence rate of WMSDs in female was about 21 percent higher than the prevalence rate of WMSDs in male. Application: The result of this study will help improvement of work environment and prevention of WMSDs in agricultural work.