• Journal of the Korean Society of Earth Science Education
• /
• v.16 no.2
• /
• pp.210-223
• /
• 2023

This study developed elementary and middle school career education programs linked to science subjects and local natural resources, and explored learning effects and implications for developing and operating career programs. In order to achieve the research purpose, a 10-hour career education program using local natural and social resources was developed and applied to 25 elementary and middle school students in rural areas. As a result of the study, most of the elementary and middle school students who participated in this study were not well aware of the natural and social resource value of the area where they lived. Therefore, when developing and operating a regional-based career education program for elementary and middle school students in rural areas, it is necessary to operate a separate teaching/learning activity time so that students can fully know the natural and social information and resource values of the region. In addition, in order to enhance students' participation and interest in career education programs, it is necessary to organize the operation of the program in groups, not individuals, and to guide students in detail by dividing the program's performance process into several sub-steps. Finally, the core material of regional-linked career education-related programs focused more on their own content, that is, agricultural products grown by parents, and future job settings were higher in start-ups that directly operate companies such as travel agencies and manufacturing companies. Given the recent emphasis on career education in the curriculum, it is suggested that local students should pay more attention to finding materials with local resource value in the field of geoscience, which is closely related to natural resources, and developing and operating them as career education programs linked to local resources.

• Journal of Nutrition and Health
• /
• v.6 no.1
• /
• pp.1-9
• /
• 1973

I. Subject of the Study: Studies on the economical nutrition supplement of cereal foods for the improvement in our notional eating habits. II. Purpose and Importance of the Study: 1. Our nation is confronted with the situation that the rice, a principal food, short of some essential amino acids, lysine and threonine, leads to imbalanced meals insufficient in the nutrient of protein, to bring many difficulties in the elevation of our national physique. 2. The shortage of even the rice imperfect in the nutrient of protein makes the import of lots of foreign rice inevitable. It is considered that the protein supplement and decrease in the consumption amount, of rice, is a serious key to the solution of our food difficulty, and then a way of the proetin supplement of rice through the addition of essential amino acid is to be rarely applied in the view of the our present finance and situation. 3. In the present experiment, therefore, it aims to the suggestion of an aspect of the improvement in our national eating habits guiding in the nutrition elevation which our nation can afford economically through the development of first, a way of the protein supplement by the mixture of cereals producted plentifully in our country, and second, a way of the decrease in the consumption amount and the improvement in the nutrition of rice through the substitution of the other cereals for rice. III. Contents of Scope of the Study: 1. Objects of the study: Objects of the study are the following three items; a) The nutrition supplement of rice through the mixture of cereals. Our nation makes mainly rice as a principal food, but practically many kinds of cereal are produced in our country. They contain different levels and qualities of each nutrient and they are different from one another in the kinds of essential amino acid consisting protein. For that reason, the mutual complement efficeincy of insufficient nutrients is observed through the mixture of cereals. b) The nutrition supplement of rice through the addition of superior protein sources to rice, a principal food. The development of rice as superior foods in the sense of nutrition is conducted through the risement in protein quality by the addition of protein sources in good quality, for example, fish flour (anchovy flour), egg powder, milk powder, and so on, and through the supplement of vitamins and minerals. c) The decrease in the consumption amount of rice through the substitution of the other cereals for rice, as a principal food. The compensation for the short amount of rice is made by the reduction in the consumption of rice through the discovery of a way of substitution of the other cereals for rice, as a principal food and of the settlement of problems in nutrition and finance subsequent to this. 2. Contents of the study: a) An ideal mixture-ratio of cereals is established for rats by feeding mixed foods(rice-barely or rice-wheat) containing 5%, 15%, 25%, 35% and 45% level of either barely or wheat. b) The nutritive value is determined in the whole subsititution of other foods for rice, and then, a way of the complement of over and under nutrients is devised. c) The ideal combination is investigated for rats through feeding mixed foods of main food, rice and supplement foods of protein sources, soy bean, fish flour, egg powder and milk Powder. d) According to results from the above three experiments, the concise functional test for men and the examination of economical property are made. 3. Scope of the study: a) The observation of the effect of each diet on the growth rate for rats. The growth rate of rats was observed for 15 groups of mixed foods of a main food, rice, and wheat flour, barley powder or soy bean powder, respectively, and 12 groups of wheat flour diets supplemented with $1{\sim}3%$ milk powder, and rice or wheat flour diets supplemented with 5% of milk powder, egg powder, fish flour or soy bean powder, respectively. b) The determination of food consumption. The food consumption was determined at weekly intervals for 27 kinds of diet described in a) item. c) The determination of food efficiency rate. The food efficiency rate for each diet was determined by calculation from the gained body weight and the food consumption amount at the same intervals described in b) item. d) The determination of protein efficiency rate. The protein efficiency rate for each diet was determined by calculation form gained body weight and the protein amount of the food consumption amount at the same intervals described c) item. e) The determination of the body component. The hematocrite and hemoglobin levels in the blood, total nitrogen in the serum, blood sugar, and lipids and glycogen in the liver were determined. f) The observation of nitrogen balance. As a means of the observation of nitrogen balance, the total nitrogen in the urine was determined. g) The analysis of economical property. The economical property was analyzed as the gained body weight to the amount equivalent to one won through the conversion of the food consumption amount into money. h) The functional test for men. The concise functional test for men was made in order to establish if the best diet for experimental animals can be applied to men. IV. Results of the Study: The national food product plan, nationwide nutritive enlightment and the improvement activities in our country eating habits, especially, mixed and powder food problems are to be significantly referred, and the following results must be applied. a) In the mixed foods of cereals, the mixed food of the rice-barley containing $5{\sim}15%$ level of barley is best in terms of nutrition. b) The addition of superior protein sources, egg, Bilk, soy bean, or fish, respectively to either rice or wheat flour makes a great risement in the nutritive value. c) The animal protein is more effective in the elevation of nutritive value of cereals. d) Rice takes the most nutritive operation and has the highest preference, among rice, wheat flour and barley. e) Wheat flour is more economical than rice in evaluation of the gained body weight to the regular money, and the addition of fish or soy bean is more economical than that of any other supplement food. But the above results are true of the range of nutrition and economical property. f) The study on the nutrition composition and barley will lead to the improvement in our national eating habits as mixed food of the rice-barley containing $5{\sim}15%$ level of barley is more nutritive. g) This study on the nutrition only for the growing animal can not be considered as a perfect and entire evaluation. Consequently, the perfect data for our national nutrition can be obtained from the experiment similar to this for the much longer period examining, in details, the growth rate, change of physical strength, mental and bodily change, average life span, and resistance ability to infectious diseases.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.4
• /
• pp.111-123
• /
• 2011

This study aims to present the basic materials, which lead us to preserve the Korea Rice Terrace as scenic sites resources and study it continuously, through researching about the present status and the preservation method of the Rice Terrace in Korea, China and Japan. The results of this study are as follows. First, The Rice Terrace has a traditional agricultural technique which minimizing the damage of the scenic view while cultivating the slope. And also, it has the value of one of the Korea unique traditional scenic views. However, The no cultivation land or disappearing desert land of rice terrace were increasing by the disadvantage of operation in land cultivation. Therefore, The Government must need preparing the base of scene resources excavation by executed the established of Korea Rice Terrace Database for preserving of Korea traditional scene. however it is getting to disappearance. And also, The High valued of Rice Terrace by cultural and scenic view which is must managed by designation of scenic sites or monument. Second, The internal and external reference book researched and analyzed results are as followings for understanding about Korea Rice Terrace feature. First of all, The Rice Terrace's dictionary meaning is just difference by each nations. However, Generally speaking that It means the terraced land by cultivated of sloped land. The Rice Terrace has cross relation with mountain valley and piedmont slope cultivation in location of condition. It occurred era is before approximately estimated from 3000 of years until 6000 of years. It can divide two type by topography shape those are slope and valley type. However, The natural element of forest has very big position in this part. But, The Rice Terrace is just managed and designated by the scenic sites with the Cultural Properties Protection Law. It must needs more binding force and effectiveness for the Rice Terrace scenic view plan establishment by scenic laws and farming and fishing village laws etc. I think that it must need the Rice Terrace related law establishment as soon as possible for efficient preservation and management of the Rice Terrace. Third, The Rice Terrace were researched and analyzed results are as followings those were executed at the Korea, China and Japan. The Korea and Japan have good Rice Terrace Characteristic. And also, The high valued scenic sites area were good managed by the Cultural Properties Protection Law as well as the superior scenic valued Rice Terrace in China. Those are also managed by designated scenic sites for protection and preservation positively. Those were managed by each autonomous district management Department. The each nation's related laws of Rice Terrace protection were just little bit different. However, The basic purpose is same. for example, it based on superior scenic view preservation and protection. Especially, The Japan's Cultural Properties Law and Scenic law linkage, and China Autonomous district legislation and effectiveness. The Korea Government must need above elements for Korea Rice Terrace culture and scenic view preservation. Fourth, We need inducing the owner system and the policy of Rice Terrace preservation promotion association for efficient preservation of Rice Terrace in japan. The owner system in japan gives the owner of the land a permission to rent the land to Rice Terrace preservation promotion association and the local government. In this system the village would be revitalized by commons in the way of the management of the terraces, beautifying the area around the terraces and etc. And also, Making the each village management operating system for Rice Terrace management through educating civilization. The civilization could receive quick help from a consultative body comprised of experts such as representatives of Cultural Heritage Administration and professors. And it is in a hurry to solve the problem of revitalization of the region by exchange between cities and the village.