• Journal of Bio-Environment Control
• /
• v.17 no.3
• /
• pp.188-196
• /
• 2008

Single span pipe greenhouses (pipe houses) are widely used in Korea because these simple structures are suitable for construction by farmers thus reducing labor cost. However, these pipe houses are very weak and frequently damaged by heavy snow and strong wind. Pipe house is constructed by pipe fabricator, which is anchored to the ground by inserting each pipe end into ground to $30\sim40cm$, so the ground support condition of pipe end is not clear for theoretical analysis on greenhouse structure. This study was carried out to find out the suitable ground support condition needed f3r structural analysis when pipe house was designed. The snow and wind loading tests on the actual size pipe house were conducted to measure the collapsing shape, displacement and strain. The experimental results were compared with the structural analysis results for 4 different ground support conditions of pipe ends(fixed at ground surface, hinged at ground surface, fixed under ground and hinged under ground). The pipe house under snow load was collapsed at the eaves as predicted, and the actual strain at the windward eave and ground support under wind load was larger than that under snow load. The displacement was the largest at the hinged support under ground, followed by the hinged at ground surface, the fixed under ground and then the fixed at ground surface independent of displacement direction and experimental loading condition. The experimental results agreed most closely with the results of theoretical analysis at the fixed condition under ground among 4 different ground support conditions. As the results, it was recommended that the pipe end support condition of single span pipe greenhouse was the fixed under ground for structural analysis.

• Journal of Biosystems Engineering
• /
• v.28 no.3
• /
• pp.231-238
• /
• 2003

Rose and chrysanthemum are the most popular flowers in Korean floriculture. Sorting flowers is a labor intensive operation in cultivation of the cut flowers and needed to be mechanized. Machine vision is one of the promising solutions for this purpose. This study was carried out to develop hardware and software of a cut flower sorting system using machine vision and to test its performance. Results of this study were summarized as following; 1. Length of the cut flower measured by the machine vision system showed a good correlation with actual length of the flower at a level of the coefficients of determination (R$^2$) of 0.9948 and 0.9993 for rose and chrysanthemum respectively and average measurement errors of the system were about 2% and 1% of the shortest length of the sample flowers. The experimental result showed that the machine vision system could be used successfully to measure length of the cut flowers. 2. Stem diameter of the cut flowers measured by the machine vision system showed a correlation with actual diameter at the coefficients of determination (R$^2$) of 0.8429 and 0.9380 for rose and chrysanthemum respectively and average measurement errors of the system were about 15% and 7.5% of the shortest diameter of the sample flowers which could be a serious source of error in grading operation. It was recommended that the error rate should be considered to set up grading conditions of each class of the cut flowers. 3. Bud maturity of 20 flowers each judged using the machine vision system showed a coincidence with the judgement by inspectors at ranges of 80%∼85% and 85%∼90% for rose and chrysanthemum respectively. Performance of the machine vision system to judge bud maturity could be improved through setting up more precise criteria to judge the maturity with more samples of the flowers. 4. Quality of flower judged by stem curvature using the machine vision system showed a coincidence with the judgement by inspectors at 90% for good and 85% for bad flowers of both rose and chrysanthemum. The levels of coincidence was considered as that the machine vision system used was an acceptable system to judge the quality of flower by stem curvature.

• Weed & Turfgrass Science
• /
• v.6 no.4
• /
• pp.292-305
• /
• 2017

This paper provides the current status of weed science and prospects for the development of weed science based on the research trends presented at the 26th Asian Pacific Weed Science Conference in 2017. Approximately 458 researchers from 25 countries, including Korea, participated in the conference and presented 325 papers in 20 research areas. Major research topics were herbicide resistance, herbicide use, herbicide development, weed ecology, allelopathy, weed management, and exotic weeds. Particularly, there were many presentations and interesting to researchers about the development and use of new herbicides, such as florpyauxifen-benzyl ester, triafamone, fenquinotrione, and tolpyralate. Development of new herbicide formulations and spray methods were suggested as a solution for the population decline in rural area and low labor quality especially in Asia and Pacific regions. In future weedy rice and exotic weeds will be a serious problem in this area so we need to cooperate to make good technical and practical solutions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.1
• /
• pp.55-60
• /
• 1991

This study was carried out to obtain the effects of soil environment and characteristics on the growth and yield of young rice seedling. Twenty four rice fields were selected among the labor saving mechanization complex, and the growth statu s and various soil characteristics were investigated The young rice seedling planted soils were located at the range of elevation 5m to 210m, and the average water holding days was 5.1 days, and drainage class were mainly moderately well to imperfectly. The plant height on 30th day after machine transplanting were higher and the tiller numbers were smaller at the higher clay contents at moderately well and imperfectly drained soils. In case of sandy loam soils, the better the drainage class, the higher plant and more tillers. Soil hardness was lower in sandy loam, and the bulk densities of loam, silty clay loam and poorly drained soils were lower than the other fields. There were not differences of soil chemical properties between the soil textural groups but organic matter content were higher in poorly drained soils. The rice yields of young seedling planted fields were negatively correlated to soil bulk density and highly significantly correlated to the exchangeable calcium contents of the soils. The average yield of young rice seedlings was 487kg/10a, 2.5% higher than semi-adult rice seedling of 475kg/10a.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.4
• /
• pp.271-281
• /
• 1979

The neccessity of hillside land reclamation for food production in Korea is no matter of question. Accordingly, the Government has launched some large scale hillside land reclamation projects. From the past experiences followings are pointed out as to the rational hillside land reclamation engineering methodologies. 1. It is observed that due to the shortages in labor and high wage, the machanization in hillside land reclamation will be an urgent subject. 2. There are several engineering methods for the reclamation of hillside lands; contour terracing, improved contour terracing, bench terracing and sloping bench terracing. 3. Selection of suitable methods will demand the considerations on the topography, particularly degree of slope, and the land use after reclamation. For ordinary crops cultivation, slope should be low and contour terracing is to be recommended, to enable the introduction of machines. In case of grass land development, after smoothing the land surface, improved contour terracing might be selected. And for the orchard development, sloping bench terracing with the construction of roads between the terrace will be suitable.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.194-204
• /
• 2020

Cultivar parameters, which are key inputs to a crop growth model, have been estimated using observation data in good quality. Observation data with high quality often require considerable labor and cost, which makes it challenging to gather a large quantity of data for calibration of cultivar parameters. Alternatively, data in sufficient quantity can be collected from the reports on the evaluation of cultivars by region although these data are of questionable quality. The objective of our study was to assess the quality of crop and management data available from the reports on the regional adaptation trials for rice cultivars. We also aimed to propose the measures for improvement of the data quality, which would aid reliable estimation of cultivar parameters. DatasetRanker, which is the tool designed for quantitative assessment of the data for parameter calibration, was used to evaluate the quality of the data available from the regional adaptation trials. It was found that these data for rice cultivars were classified into the Silver class, which could be used for validation or calibration of key cultivar parameters. However, those regional adaptation trial data would fall short of the quality for model improvement. Additional information on management, e.g., harvest and irrigation management, can increase the quantitative quality by 10% with the minimum effort and cost. The quality of the data can also be improved through measurements of initial conditions for crop growth simulations such as soil moisture and nutrients. In addition, crop model improvement can be facilitated using crop growth data in time series, which merits further studies on development of approaches for non-destructive methods to monitor the crop growth.

• Journal of Environmental Impact Assessment
• /
• v.15 no.1
• /
• pp.53-65
• /
• 2006

Topographic condition is one of the most important things in farming activities. The topographic condition didn't matter for farming in the past because agricultural products had competitive power in the market. So farmers tried to extend their farms without any concern of topographic condition. We need less labor-consuming farming as industrial structure has been changed and the competitive power of the farming has been getting weak. This study analyzed the fallow potential in agricultural area by topographic condition so that we have got results as follows. Maps of elevation, slope, distance from roads and water resources were made for getting a fallow probability model in farms, and these 4 factors were used as independent variables while a variable on whether it is fallow or not is a dependent variable in logistic regression model. In an analysis of the fallow potential depending on farm land types, the fallow probability in fallow orchard showed the highest value of farm lands, 0.973. Cultivated orchard had 0.730 and upland had 0.616 of the fallow probability. The fields having high fallow potential had high elevation, steep slope, and long distance from water resources and roads. Especially, fields having a probability over 0.99 appeared in orchards, fallow uplands and single cropping uplands, which were recognized to have several disadvantages related to the fallow like as high elevation, steep slope, and long distance from water resources and roads. With the logistic analysis, the suitable farm lands appeared at 16.45m of the mean elevation, 1.89 degree of the mean slope, 39.91m of the average distance from water resources, and 32.39m of the average distance from roads. On the contrary, non-suitable land appeared at 114.7m of the mean elevation, 24.9 degree of the mean slope. The distance from roads was more important variable than the distance from water resources for analyzing suitable farm land.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.2
• /
• pp.216-232
• /
• 2008

This paper aim to review the extent of Park Je-Ga's geographical interest and knowledge and where he intended to make good use of them through Bukhakui(北學議). In particular, it was classified and interpreted as the contents related to agricultural, industrial and commercial geography focusing on the contents of the economic geography. As for the contents related to agricultural geography, it suggests minutely and precisely the necessity and concrete methodology for farmland, seeding, fertilization, breeding of cattle, sericulture and fruits. As for the contents related to industrial geography, it lays emphasis on the pursuit of the modernization of ours by means of accepting high-tech, industrial engineering and knowledge from Western scholars who were staying in Beijing. As for the contents related to commercial geography, it puts emphasis on the conversion of idle labor capacity of the nobility to practical production capacity, the pursuit of economic vitalization by opening land transportation through wheels and the trade by sea with neighboring countries such as Qing, Japan, Ryukyu, Vietnam and so on. It can be known through this study that Park Je-Ga was a realist who made an effort to raise the economic power of the region and the country with using his endeavor of economic geographical interest and knowledge. His economic geographical interest and knowledge were connected directly with practical use. If his economic geographical knowledge and way of thinking had been accepted successfully at that time, the economic power in the latter half of the Joseon dynasty could have leaped to a considerable degree.

• Korean journal of applied entomology
• /
• v.21 no.3 s.52
• /
• pp.138-141
• /
• 1982

The insecticides aldicarb$(Temik^{(R)}\;15G)$, carbofuran$(Curaterr^{(R)}\;3G)$, and disulfoton$(Disyston^{(R)}\;5G)$ were evaluated in the field for the control of the pine gall midges(Thecodiplosis joponensis Uchida et Inouye) at rate of 5 a.i.g/cm dbh using the method of circle-furrow treatment(ca. loom in furrow depth), apart 50cm Iron the trunk of the pine trees. In addition, for improving the application method of granular insecticides the effects of conventional circle-furrow treatment were compared with those of pit treatments and radical-furrow treatments. A single root-zone treatment of aldicarb and carbofuran i the pine trees was significanlty effective for the pressure of the gall incidence by the insects. Control effectiveness in three-pit treatment was identical with those in conventional circle-furrow treatment. The pit treatment compared with the circle-furrow and radical furrow treatments would be a further feasible method in saving labor cost.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.10
• /
• pp.373-382
• /
• 2016

Under the Agricultural technology is influenced from climate that is requisite of seasonal. So this system will cover the problems and develop the agricultural industry as well. So far, the agricultural industry is developing however, it has the points of the weakness because of natural disasters such as wind risk and heavy snow. This paper designs system to change vinyl on the greenhouse. This is a preliminary study for the real-time feedback control of greenhouse. The study developed a wireless IoT sensor system based on authentic technology capacities, to integrate with the protected horticulture Management System. These system was used to evaluate the levels of the snow cover and wind through IoT devices. The existing greenhouse uses the warm water to clear snow or to change methods. This system will recover by changing the vinyl which is covered outside of the greenhouse. The points of the system is changing vinyl to spin pipe. It is contained extra vinyl. The effects of this system are minimized labor protected crops from natural disasters. For this purpose, the study first developed a wireless IoT sensor unit that integrates an MEMS device and wireless communication module. Also, the study developed an operating program that enables real-time response measurement. It will help operational and maintenance greenhouse as a result.