• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.124-128
• /
• 2016

The objective of this research was to determine the effects of harvesting frequency and fertilization levels on botanical composition, dry matter yield, and forage feed compositions of Alpine grassland at 800 m altitude. This research lasted for three years at National Alpine Agricultural Research Institute in Pyeongchang with two harvesting frequency schedules (two and three times annually) and two levels of fertilizer application (conventional level of fertilizer at 280-200-240 kg/ha and a lower level of fertilizer at 200-200-200 kg/ha for N, $P_2O_5$, and $K_2O$). Mixture combinations with seeding rate (kg/ha) were as follows: Orchardgrass 18, Tall fescue 9, Timothy 8, Kentucky bluegrass 3, and Ladino Clover 2. The gramineae ratio ranged from 93.2 to 95.3%. Therefore, gramineae forage was considered as the dominant plant in this experiment. No significant (p>0.05) difference was observed in forage dry matter yield between the two harvesting frequency treatments (two times at 9.8 ton/ha and three times at 8.6 ton/ha). However, forage dry matter yield in the two times of harvesting frequency tended to be greater than that in the three times of harvesting frequency. Significantly (p<0.05) higher forage dry matter yield in the standard fertilization level group than the lower fertilization level group (9.8 ton/ha vs. 8.7 ton/ha) was observed. However, there was no significant (p>0.05) difference in forage crude protein concentration between the two harvesting frequency treatment groups, although the concentration in the group with three times of harvesting frequency tended to be higher. In contrast, crude fiber concentration in the group with two times of harvesting frequency tended to be higher, although the difference was not statistically significant (p>0.05). Crude protein, ether extract, crude fiber, and organic matter concentrations were not significantly (p>0.05) different between the two groups with different fertilization levels. Based on these results, it was concluded that the group with two times of harvesting frequency with conventional fertilization level might be proper for obtaining better forage productivity for Alpine grassland at 800 m altitude.

• Journal of Food Hygiene and Safety
• /
• v.29 no.2
• /
• pp.79-84
• /
• 2014

This study has been performed for about 270 days at analyzing biologically hazardous factors in order to develop HACCP system for the non heat-frozen carrot juice. A process chart was prepared by manufacturing process of raw agricultural products of non heat-frozen carrot juice, which was contained water and packing material, storage, washing, cutting, extraction of the juice, internal packing, metal detection, external packing, storage and consignment (delivery). As a result of measuring Coliform group, Staphylococcus aureus, Salmonella spp., Bacillus cereus, Listeria Monocytogenes, Enterohemorrhagic E. coli before and after washing raw carrot, Standard plate count was $4.7{\times}10^4CFU/g$ before washing but it was $1.2{\times}10^2CFU/g$ detected after washing. As a result of testing airborne bacteria (Standard plate count, Coliform group, Yeast and Fungal) depending on each workplace, number of microorganism of in packaging room, shower room and juice extraction room was detected to be 10 CFU/Plate, 60 CFU/Plate, 20 CFU/Plate, respectively. As a result of testing palm condition of workers, as number of Standard plate count, Coliform group and Staphylococcus aureus was represented to be high as $6{\times}10^4CFU/cm^2$, $0CFU/cm^2$ and $0CFU/cm^2$, respectively, an education and training for individual sanitation control was considered to be required. As a result of inspecting surface pollution level of manufacturing facility and devices, Coliform group was not detected in all the specimen but Standard plate count was most dominantly detected in scouring kier, scouring kier tray, cooling tank, grinding extractor, storage tank and packaging machine-nozzle as $8.00{\times}10CFU/cm^2$, $3.0{\times}10CFU/cm^2$, $4.3{\times}10^2CFU/cm^2$, $7.5{\times}10^2CFU/cm^2$, $6.0{\times}10CFU/cm^2$, $8.5{\times}10^2CFU/cm^2$ respectively. As a result of analyzing above hazardous factors, processing process of ultraviolet ray sterilizing where pathogenic bacteria may be prevented, reduced or removed is required to be controlled by CCP-B (Biological) and critical level (critical control point) was set at flow speed is 4L/min. Therefore, it is considered that thorough HACCP control plan including control criteria (point) of seasoning fluid processing process, countermeasures in case of its deviation, its verification method, education/training and record control would be required.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.34-41
• /
• 1984

This study was conducted to investigate yearly changes of weeds occurring in orchard and to evaluate an effect of continuous herbicide application on weed population in apple fields. Digitaria sanguinalis, Cephalonoplos segetum, Calystegia hederacea, Polygonum aviculare, Echinochloa crus-galli, and Portulaca oleracea were observed to be the problem weeds in orchard with yearly similar species for a three-year, showing D. sanguinalis was single dominant species for a three-year experimental period. An increase of Simpson's index from 0.22 in the first year to 0.33 in the 3 rd year was observed in the oxyfluorfen treated plot, indicating that most of the weed species were well controlled, while in the untreated plot, D. sanguinalis was relatively single dominant species showing Simpson's index, 0.56 in the 1st year and decreased to 0.32 in the 3 rd year meaning diversification of weed species, and the same trend was also observed in community dominance. Dissimilarity coefficient, 41.6, observed in the weed populations of 1st year and 2nd year, increased up to 58.8 between 1st year and 3 rd year's weed populations in the oxyfluorfen treated plot, indicating that weed community was greatly affected by oxyfluorfen treatment. Based on 3 year's dry weight oxyfluorfen treatment controlled 95 % of weeds such as $149.3g/m^2$ dry weight in the untreated control plot, with a little yearly changes of dry weight. Composition of perennial and biennial weeds was about 59% in the herbicide treated plots and 30% in the untreated control, showing a relative increase of these weeds in the treated plot. However, total dry weight of these weeds was markedly low, showing less than 5% of the untreated one. An annual, D. sanguinalis composed of 70% of total dry weight in the untreated control.

• Current Research on Agriculture and Life Sciences
• /
• v.4
• /
• pp.1-6
• /
• 1986

This study was conducted to find out the effect of $SiO_2$ treatment on the $SiO_2$ concentration in guttation liquid, the amount of guttation liquid exudated from the margin of rice leaves, and the relationships between $SiO_2$ concentration in guttation liquid and foliar burn during the rice seedling stage, using two rice varieties;Nagdong-byeo (a Japonica) and Samgang-byeo (a - Indica - Japonica hybrid). Seedlings were cultivated in water solution and enveloped in polyvinyl case ($50cm{\times}150cm{\times}70cm$). $SiO_2$ treatment increased the amount of guttation liquid, the amount of guttation liquid (Nagdong-byeo:4.30mg/plant, Samgang-byeo:4.34mg/plant)) treated with 200ppm of $SiO_2$ was greater than any other level, decreased over 200ppm of $SiO_2$. $SiO_2$ concentration in guttation liquid was increased as application rates of $SiO_2$ increased, showing the positive correlation, and $SiO_2$ in guttation liquid/$SiO_2$ in culture ratio decreased over 100ppm of $SiO_2$. The highest concenitration of $SiO_2$ (Nagdong-byeo:172.6ppm/lcc, Samgang-byeo:199.8ppm/lcc) in guttation liquid was obtained at 12 hrs after $SiO_2$ applied. Foliar burn seemed to be closely related with $SiO_2$ concentration in guttation liquid.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.383-397
• /
• 1999

For sites to be investigated, the results of such an investigation can be used in determining foals for cleanup, quantifying risks, determining acceptable and unacceptable risk, and developing cleanup plans t hat do not cause unnecessary delays in the redevelopment and reuse of the property. To do this, it is essential that an appropriately detailed study of the site be performed to identify the cause, nature, and extent of contamination and the possible threats to the environment or to any people living or working nearby through the analysis of samples of soil and soil gas, groundwater, surface water, and sediment. The migration pathways of contaminants also are examined during this phase. Key aspects of cost-effective site assessment to help standardize and accelerate the evaluation of contaminated soils at sites are to provide a simple step-by-step methodology for environmental science/engineering professionals to calculate risk-based, site-specific soil levels for contaminants in soil. Its use may significantly reduce the time it takes to complete soil investigations and cleanup actions at some sites, as well as improve the consistency of these actions across the nation. To achieve the effective site assessment, it requires the criteria for choosing the type of standard and setting the magnitude of the standard come from different sources, depending on many factors including the nature of the contamination. A general scheme for site-specific assessment consists of sequential Phase I, II, and III, which is defined by workplan and soil screening levels. Phase I are conducted to identify and confirm a site's recognized environmental conditions resulting from past actions. If a Phase 1 identifies potential hazardous substances, a Phase II is usually conducted to confirm the absence, or presence and extent, of contamination. Phase II involve the collection and analysis of samples. And Phase III is to remediate the contaminated soils determined by Phase I and Phase II. However, important factors in determining whether a assessment standard is site-specific and suitable are (1) the spatial extent of the sampling and the size of the sample area; (2) the number of samples taken: (3) the strategy of taking samples: and (4) the way the data are analyzed. Although selected methods are recommended, application of quantitative methods is directed by users having prior training or experience for the dynamic site investigation process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.970-976
• /
• 2011

Strip tiller equipment was developed to reduce soil erosion in the slope land for highland agricultural area. The equipment consisted of 4 rows strip tillage device and fertilizer applicator. The field was tilled in 10 cm width and in 10 cm depth by the equipment, of which tilled surface was 16.7% of full-width tillage. The working time and fuel consumption of the equipment were $3.8hours\;ha^{-1}$ and $24.4L\;ha^{-1}$ respectively, which were 59% and 74% less than those of the conventional tillage. Fertilizer efficiency of the equipment in cultivation of Chinese cabbage was 1.7, 1.6 and 1.5 times higher in nitrate, phosphorous and potassium respectively, than conventional tillage. When the equipment was used after covering of rye residue, the quantity of runoff was 49~67% lower than the conventional tillage. And the quantity of soil loss were 1.3 and $0.2Mg\;ha^{-1}$ at right after and 30 days after planting of Chinese cabbage respectively, while 11.5 and $4.1Mg\;ha^{-1}$ in conventional tillage. In conclusion, the strip tillage equipment developed in this study can be applicable to slope land, so that soil loss of 90% can be reduced.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.361-367
• /
• 2011

Soil fertility of alpine soils in Gangwon-Do has been deteriorating because of heavy input of chemical fertilizers for intensive crop production. To reduce application of chemical fertilizers, use of livestock manure compost in alpine soils increases consistently. Soil loss and runoff due to heavy rainfall in alpine area cause nutrient loss from soil, and subsequently pollute stream water. Therefore, the objective of this study was to assess nutrient efficiency and loss in Chinese cabbage cultivated soil with different livestock manure composts in several slopes. As control, chemical fertilizer was applied at the rate of $250-78-168kg\;ha^{-1}$ for $N-P_2O_5-K_2O$. Each pig-and chicken manure compost was applied at the rate of $10MT\;ha^{-1}$. Chemical fertilizer + chicken manure compost was applied as same rate. Four treatments was practiced in 5, 20, and 35% filed slopes, respectively. We monitored the amounts of soil loss and runoff water after rainfalls, and we also analyzed the contents of nutrients in soil and runoff water through lysimeter installed in alpine agricultural institute in Gangwon-Do. T-N loss due to soil loss was much greater with increasing filed slops rather than different fertilizer treatments. T-N loss has positive relationship with field slopes, which showing soil loss (MT/ha) = 1.66 slopes (%) - 3.5 ($r^2$ = 0.99). Available phosphate and exchangeable cations showed similar tendency with increasing slopes. T-N and T-P losses caused by runoff water were highest in chemical fertilizer (NPK) + chicken manure compost treated plot, while lowest in chemical fertilizer treatment. T-N contents (2.13, 1.95%) in chinese cabbage treated either pig and chicken manure composts compared to that (2.65%) of chemical fertilizer were significantly less. This could be resulted from much greater T-N loss in soil treated with pig and chicken manure composts.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.4
• /
• pp.268-276
• /
• 2018

BACKGROUND: In the month of January 2018, fine dust alerts and warnings were issued 36 times for $PM_{10}$ and 81 times for PM2.5. Air quality is becoming a serious issue nation-wide. Although interest in air-purifying plants is growing due to the controversy over the risk of chemical substances of regular air-purifying solutions, industrial spread of the plants has been limited due to their efficiency in air-conditioning perspective. METHODS AND RESULTS: This study aims to propose a vegetation-based bio-filter system that can assure total indoor air volume for the efficient application of air-purifying plants. In order to evaluate the quantitative performance of the system, time-series analysis was conducted on air-conditioning performance, indoor air quality, and comfort index improvement effects in a lecture room-style laboratory with 16 persons present in the room. The system provided 4.24 ACH ventilation rate and reduced indoor temperature by $1.6^{\circ}C$ and black bulb temperature by $1.0^{\circ}C$. Relative humidity increased by 24.4% and deteriorated comfort index. However, this seemed to be offset by turbulent flow created from the operation of air blowers. While $PM_{10}$ was reduced by 39.5% to $22.11{\mu}g/m^3$, $CO_2$ increased up to 1,329ppm. It is interpreted that released $CO_2$ could not be processed because light compensation point was not reached. As for the indoor comfort index, PMV was reduced by 83.6 % and PPD was reduced by 47.0% on average, indicating that indoor space in a comfort range could be created by operating vegetation-based bio-filters. CONCLUSION: The study confirmed that the vegetation-based bio-filter system is effective in lowering indoor temperature and $PM_{10}$ and has positive effects on creating comfortable indoor space in terms of PMV and PPD.

• Journal of agricultural medicine and community health
• /
• v.44 no.1
• /
• pp.11-27
• /
• 2019

Dementia is major epidemic disease of the 21st century in the world. Dementia is one of the major issues in public health globally. Also in Korea, the estimated prevalence of dementia was 8.7%(0.47 million) in 2010, the number will reach the 1 million mark in 2024, it will become a 15.1%(2.71 million) by 2050. Among Koreans aged 65 or older, 725,000 are estimated to be suffering from dementia in 2017. Against dementia, Korea developed three National Dementia Plans in 2008, 2012, and 2016. The 1st plan was came into effect in 2008 and focused on prevention, early diagnostic, development and coordination of infrastructures and management, and improving awareness. The 2nd plan was launched in 2012, addressed the same priorities but had a stronger focus on supporting family members. In 2012 the Dementia Management Act established a statutory basis for organization of the National Dementia Plans. Under the Dementia Management Act, the government is required to produce a comprehensive plan for dementia every 5 years. The Act also orders that the government should register the dementia patients and collect statistics on epidemiology and the management of the dementia conditions. The Dementia Management Act of Korea required the operation of the National Institute of Dementia and Metropolitan/Provincial Dementia Centers to make and carry out dementia management plans throughout the nation. The Act also mandate to establish Dementia Counselling Centers in every public health center and the National Dementia Helpline. The 3rd National Dementia Plan of 2016 aims to build a dementia friendly community to ensure people with dementia and their carer live well. This plan focus on community-based prevention and management of dementia, convenient and safe diagnosis, treatment, and care for people with dementia, the reduction of the care burden for family care-givers of people with dementia, and support for dementia research through research, statistics and technology. In 2017, Moon's government will introduce the "National Dementia Responsibility System," which guarantees most of the burden caused by dementia. This plan include that the introduction of a ceiling on self-pay for dementia diseases, expansion of the application of dementia care standards through alleviating the support criteria for long-term care insurance for mild dementia, expansion of dementia support centers, expansion of national and public dementia care facilities. In the meantime, Korea has accomplished many accomplishments by establishing many measures related to dementia and promoting related projects in a short time, but there are still many challenges.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.14 no.6
• /
• pp.30-43
• /
• 2018

Many studies have been carried out to retrieve images using colors, shapes, and textures which are characteristic of images. In addition, there is also progress in research related to the disease images of the crop. In this paper, to be a help to identify the disease occurred in crops grown in the agricultural field, we propose a similarity-based crop disease search system using the diseases image of horticulture crops. The proposed system improves the similarity retrieval performance compared to existing ones through the combination descriptor without using a single descriptor and applied the weight based calculation method to provide users with highly readable similarity search results. In this paper, a total of 13 Descriptors were used in combination. We used to retrieval of disease of six crops using a combination Descriptor, and a combination Descriptor with the highest average accuracy for each crop was selected as a combination Descriptor for the crop. The retrieved result were expressed as a percentage using the calculation method based on the ratio of disease names, and calculation method based on the weight. The calculation method based on the ratio of disease name has a problem in that number of images used in the query image and similarity search was output in a first order. To solve this problem, we used a calculation method based on weight. We applied the test image of each disease name to each of the two calculation methods to measure the classification performance of the retrieval results. We compared averages of retrieval performance for two calculation method for each crop. In cases of red pepper and apple, the performance of the calculation method based on the ratio of disease names was about 11.89% on average higher than that of the calculation method based on weight, respectively. In cases of chrysanthemum, strawberry, pear, and grape, the performance of the calculation method based on the weight was about 20.34% on average higher than that of the calculation method based on the ratio of disease names, respectively. In addition, the system proposed in this paper, UI/UX was configured conveniently via the feedback of actual users. Each system screen has a title and a description of the screen at the top, and was configured to display a user to conveniently view the information on the disease. The information of the disease searched based on the calculation method proposed above displays images and disease names of similar diseases. The system's environment is implemented for use with a web browser based on a pc environment and a web browser based on a mobile device environment.