• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.171-176
• /
• 2004

The effects of agitation and aeration for exopolysaccharide(EPS) production through batch cultivation of an Enterobacter sp. isolated from the composter were investigated. During the EPS fermentation under conditions of constant agitation speed from 200 to 900 rpm and constant aeration rate of 0.5-2.5 vvm, the low yields of EPS(4.8-5.2g/L) was observed as the viscosity increase of culture broth. With the stepwise increases in agitation speed and aeration rate, the EPS production and the viscosity of EPS were increased 1.3~1.4 times and 2.3~3.6 times higher than those of the fixed conditions, respectively. Therefore, these stepwise increases were considered as the key operating parameters for enhancing EPS production. The max. EPS(6.8g/L) and viscosity(14,000cp) were obtained when the agitation speed was increased from 300 to 900 rpm for 54hrs at 1.5 vvm.

• Journal of the East Asian Society of Dietary Life
• /
• v.8 no.1
• /
• pp.57-65
• /
• 1998

To utilize deteriorated sweet persimmon effectively, response surface methodology(RSM) was used to determine the optimal vinegar fermentation conditions and monitored by a divided two stage fermentation. The optimum conditions for maximum alcohol content were obtained when the first stage (alcohol fermentation) was carried out with an initial sugar concentration of 18.5$^{\circ}$Brix, agitation rate of 140.8 rpm, fermentation time of 127.6 hr. When sugar concentration was 14$^{\circ}$Brix maximum alcohol content(7.1%) was predicted at fermentation conditions of 160 rpm in agitation rate, 140hr in fermentation time. The optimum conditions for maximum acidity were obtaiend when second stage(vinegar fermentation)was carried out 249.5 rpm in agitation rate, 148.8 hr in fermentation time. Predicted values at the optimum conditions were similar to experimental values.

• Fisheries and Aquatic Sciences
• /
• v.11 no.4
• /
• pp.224-228
• /
• 2008

With the aim of increasing the $CoQ_{10}$ production in mass culture, the effect of aeration-agitation on the $CoQ_{10}$ production using Rhodobactor sphaeroides was investigated in a l-L bioreactor. The maximum $CoQ_{10}$ production was 1.69 mg/g of dry cell weight under conditions of 50 Lux, $30^{\circ}C$, 300 rpm, and 5-vvm aeration. The $CoQ_{10}$ production was improved to produce 2.91 mg/g of dry cell weight under reduced conditions of agitation speed (200 rpm) and aeration rate (0.2 vvm). When R. sphaeroides was cultivated under more reduced DO levels during the exponential phase of the cell, the $CoQ_{10}$ production yield of 3.88-mg/g dry cell weight was the maximum obtained. Therefore, poorer conditions of aeration-agitation resulted in higher production of $CoQ_{10}$, and thus DO content was a crucial factor in the production of $CoQ_{10}$. Accordingly, it was necessary to control the DO concentration in order to enhance the $CoQ_{10}$ biosynthesis within a large-scale production.

• Microbiology and Biotechnology Letters
• /
• v.45 no.1
• /
• pp.57-62
• /
• 2017

Recently, we isolated the mutant Kluyveromyces marxianus 36907-FMEL1, which demonstrated improved xylose reductase activity as compared to the parental strain, K. marxianus ATCC 36907. Effects of agitation conditions on xylitol production were verified using a bioreactor system. Under an agitation speed of 400 rpm, K. marxianus 36907-FMEL1 exhibited the highest xylitol yield (0.57 g/g) and productivity ($0.64g{\cdot}l^{-1}{\cdot}h^{-1}$) at $30^{\circ}C$. When the fermentation temperature was increased to $40^{\circ}C$, interestingly, xylitol yield and productivity were found to be increased to 21% (0.64 g/g) and 58% ($0.90g{\cdot}l^{-1}{\cdot}h^{-1}$), respectively, under the optimized agitation conditions.

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.213-223
• /
• 1973

This report has been focused on the studies of the hydraulic pressure distribution which is created by the agitation of the both liquids, dialysing solution and solvent, on either side of the dialysis membrane surface. Agitators of the both liquids have been investigated and developed which can counterbalance the hydraulic pressures. The effects of the agitation velocities on the dialysing velocity have been studied under the conditions which allow the uniform dialysis on the whole surface of the dialysis membrane. Each agitation velocity of the dialysing solution and solvent, at which the dialysis coefficient is obtained most precisely, has been determined.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.6
• /
• pp.352-356
• /
• 2002

Aeration was found to affect the biological denitrification by Ochrobactrum authropi SY509. Although cell growth was vigorous under 1 vvm of aeration and an agitation speed of 400 rpm in a 3-L jar fermentor, almost no nitrate was removed. Yet under low agitation speeds (100, 200, and 300 rpm), denitrification occurred when the dissolved oxygen was exhausted shortly af-ter the inoculation of the microorganism. Ochrobactrum authropi SY509 was found to express highly active denitrifying enzymes under anaerobic conditions. The microorganism also synthesized denitrifying enzymes under aerobic conditions (1 vvm and 400 rpm), yet their activity was only 60% of the maximum level under anaerobic conditions and the nitrate removal efficiency was merely 15%. However, although the activities of the denitrifying enzymes were inhibited in the presence of oxygen, they were fully recovered when the conditions were switched to anaerobic conditions.

• Journal of Mushroom
• /
• v.19 no.2
• /
• pp.81-87
• /
• 2021

Roridin E, produced by Podostroma cornu-damae, is a mycotoxin with anticancer activity. To increase the content of roridin E, submerged culture conditions were optimized using response surface methodology. Three factors, namely, medium initial pH, incubation time and agitation speed were optimized using a Box-Behnken design. The optimum submerged culture conditions to increase the content of roridin E included a medium with an initial pH of 4.0, an incubation time of 12.90 days, and an agitation speed of 63.03 rpm. The roridin E content in the submerged culture, under the aforementioned conditions, was 40.26 mg/L. The findings of this study can help lower the current price of roridin E and promote its related research.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.812-817
• /
• 2003

In the first stage, strawberry wine was manufactured in 14$^{\circ}$Brix initial sugar content, for 50 hr at 28$^{\circ}C$ using Saccharomyces kluyeri DJ97. In the second stage, the acetic acid fermentation conditions for maximun acidity (4.60%) were 1.48% initial acidity and 195.76 rpm in agitation rate for 7.34 day. The fermentation conditions for maximun Hunter color a value were 1.78% initial acidity and 117.63 rpm in agitation rate for 7.35 day. Therefore, optimum acetic acid fermentation conditions were 1.5% initial acidity and 196 rpm in agitation rate for 176 hr using Acetobacter sp. PA97.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.284-287
• /
• 2004

Micro-structures fabricated by X-ray lithography are largely affected by doses, development conditions and other factors. For these reasons, PMMA development rates and its surface profiles under various development conditions were obseued. Development rates were measured in the rage from 1 to 6 $kJ/cm^3$ using the 9C1 white beamline of Pohang light source(PLS). In this experiment, we observed that development rates of stacked PMMA sheet using Si filter were relatively higher than that of not using Si filter. Furthermore, development rates in condition with the acoustic agitation(1 MHz, 3.67 $W/cm^3$) were twice than that in dipping condition with $35^{\circ}C$ developer considering the PMMA sheets-substrate bond strength

• Journal of Environmental Science International
• /
• v.10 no.1
• /
• pp.65-71
• /
• 2001

HRP(high rate pond) which had kept the manufactured clay of 3cm-thickness as benthic clay in reactor and the 6 flat-blade turbine as impeller for agitation was named HRASP(high rate algae stabilization pond). And the experiment for treatment of artificial synthesis wastewater containing COD :300mg/$\ell$, NH$_3$-N : 300mg/$\ell$, T-P : 9mg/$\ell$ as nutrients was been performed successfully. This reactor was been operated under conditions : 24hrs.-irradiation and water temperature, $25^{\circ}C$ and pH 7 and agitation velocity, 15, 30, 45rpm and the effect of agitation velocity on algal bioaccumulation of nutrients was been studied with view point of fluid dynamics. The next followings could be obtained as results. 1. The agitation with a turbine impeller blade in HRASP makes clay particle indicate superior suspension effect by means of forming of excellent curl/shear flow in reactor. 2. The excessive suspension of clay particle which is created at 45rpm as rotation velocity of impeller blade of turbine disturbs the light penetration and algal photosynthesis reaction. 3. Efficiencies for removal of nutrients come out as COD : 93.9%~94.3%, ($NH_3-N + NO_3-N$) : 81.9%~99.0%, T-P : 46.8%~53.6%. 4. Kuo values of $K_1$for algal growth come out seperately as 15rpm : $1.876{\times}10^{-2}, 30rpm : 4.618{\times}10^{-3}$. 5. Kuo values of $K_2$for removal of N, P come out seperately as 15rpm : $8.403{\times}10^{-1}$ and $1.397{\times}10^{-1}$, 30rpm : $4.823{\times}10^{-1} and 2.052{\times}10^{-1}$. 6. It can be guessed easily that the excessive agitation can inhibit the algal and bacterial symbiotic reaction if it is considered that micro organism\` sense to preservation of life is relied on natural function of metabolism. Therefore the studies for this matter should be followed continuously.