• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.459-462
• /
• 2005

Recently, interest grew on the quality of aggregates following the diminution of primary resources from river and the growing construction demand which exhausted high-quality sand sources around large cities and incited the use of low grade aggregates like shore sand and sea sand that can be supplied in natural state. Moreover, the most sensitive aspect highlighted by the unstability of aggregate supply is the quality. The extreme insufficiency of quality criteria about the materials currently used as substitute aggregates and about concrete mixed with such materials is also critical. This study investigated influence of qualities of concrete which is using mixed crushed sand and natural sand

• International Journal of Concrete Structures and Materials
• /
• 제6권1호
• /
• pp.59-64
• /
• 2012

Sand-concrete is being researched for potential usage in construction in Saharan regions of Algeria, because of shortage in coarse aggregate resources. This research work deals with the effect of dune sand, available in huge quantities in these regions, on the properties of flowing sand-concrete (FSC) prepared with different proportions of dune and river sands. Mini-cone slump test, v-funnel flow-time test and viscosity measurements were used to characterize the behaviour of FSC in fresh state. The 28-day compressive strength was also determined. Test results show that an optimal content of dune sand, which makes satisfied fresh and hardened properties of FSC, is obtained. Moreover, the obtained flow index (constant b) calculated by the help of power-law viscosity model is successfully correlated to the experimental results of v-funnel flow time.

• 산업기술연구
• /
• 제16권
• /
• pp.45-50
• /
• 1996

An experimental study os performed to examine the feasibility of using wastes steel furnace slag construction materials and its utility as a replacement for the natural resources to prevent the economic loss was investigated. A half factorial exprements was performed with the variables of W/C ratio, S/A, Coarse aggrigate/Slag ratio and slump as a preliminary study for optimum mix design of concrete. The results show that the W/C ratio and Slump ratio are the most important factor to the concrete strength. The substitute of waste Slag up to 100% has little influence, saying that it can substitute the coarse aggregate without damaging the concrete properties.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.531-538
• /
• 2018

The slag through sieve #4 replaced the natural fine aggregate in different proportions (0-50%) to make ready-mixed soil and slag (RMSAS). The fresh properties studied, and the concrete specimens were produced to test the hardened properties at different ages. Results showed that the workability of RMSAS decreases when the replacement increases. The unit weight increases with the replacement. The setting time extends when the replacement decreases and shortens when the replacement increases. The compressive strength, ultrasonic pulse velocity and hammer rebound value increase with the replacement. However, the high-replacement results decrease because of the expansion factor at late age. Resistivity is close and less than $20k{\Omega}-cm$. After the industrial of steelmaking by-products are processed properly, they can be used in civil engineering, not only as a substitute for natural resources and to reduce costs, but also to provide environmental protection.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.247-249
• /
• 2007

Crown parameters are important roles in tree species identification, because the canopy is the aggregate of all the crowns. However, crown measurements with spaceborne image data have remained more difficult than on aerial photographs since trees show more structural detail at higher resolutions. This recognized problem led to the initiation of the research to determine if high resolution satellite image data could be used to identify and classify single tree species. In this paper, shape parameters derived from pixel-based crown area measurements and texture features derived from GLCM parameters in QuickBird image were tested and compared for individual tree species identification. As expected, initial studies have shown that the crown parameters and the canopy texture parameters provided a differentiating method between coniferous trees and broad-leaved trees within the compartment(less than forest stand) for single extraction from spaceborne high resolution image.

• 한국결정성장학회지
• /
• 제20권4호
• /
• pp.185-191
• /
• 2010

잔사회와 준설토를 효과적으로 자원화하기 위하여 8~10 mm 크기의 구형 인공 골재를 성형하였다. 출발원료는 입도 및 조성을 변화시켰으며 $1050{\sim}1250^{\circ}C$ 범위에서 소결하였다. 제조된 골제는 KS에 의거하여 골재의 밀도와 흡수율 시험을 진행하였다. 잔사회와 준설토는 고온에서 철 함유 물질과 알칼리/알칼리토 산화물에 의한 발포 기구가 적용됨을 예측할 수 있었다.

• Advances in concrete construction
• /
• 제4권4호
• /
• pp.263-281
• /
• 2016

Concrete continues to be the most consumed construction material in the world, only next to water. Due to rapid increase in construction activities, Construction and Demolition (C&D) waste constitutes a major portion of total solid waste production in the world. It is important to assess the amount of C&D waste being generated and analyse the practices needed to handle this waste from the point of waste utilization, management and disposal addressing the sustainability aspects. The depleting natural resources in the current scenario warrants research to examine viable alternative means, modes and methods for sustainable construction. This study reports processing Recycled Coarse Aggregates (RCA) using a rod mill, for the first time. Parameters such as amount of C&D waste for processing, nature of charge and duration of processing time have been optimized for obtaining good quality RCA. Performance of RCA based concrete and performance enhancement techniques of 50% RCA based concrete are discussed in this paper.

• Geosystem Engineering
• /
• 제21권5호
• /
• pp.291-296
• /
• 2018

The aim of this work is to study the effect of aggregate type on the physico-mechanical properties and microstructure of bio-mortar (BM). Three different aggregates such as sand, dolomite and basalt were used. BM was prepared by mixing aggregates with bacterial cells (Sporosarcina Pasteurii) and one equimolar (1 M) of $urea/CaCl_2.2H_2O$. The results proved that the chemical composition and physical properties of aggregates play an important role in the microbial precipitation rate as well as size, morphology and crystallinity of the precipitated calcite, which strongly reflects on the properties of the prepared BM. The BM containing dolomite gave the highest compressive strength and lowest water absorption.

• 한국지반공학회논문집
• /
• 제40권1호
• /
• pp.29-37
• /
• 2024

본 연구에서는 이산화탄소 처리를 통한 순환골재의 지반공학적 성능 개량을 평가하기 위하여 5kg급 프로토타입 반응조를 제작하였다. 제작된 반응조를 이용하여 이산화탄소 처리한 순환골재와 미처리 순환골재의 골재 파쇄값과 노상토지지력비를 측정하였다. 이산화탄소 처리를 통해 골재 파쇄값은 35.6%에서 33.2%로 2.4% 감소하고 노상토지 지력비는 97.5%에서 102.4%로 4.9% 증가하는 것이 관찰되었다. 탄산화 반응을 통해 생성된 탄산칼슘 염으로 인해 순환골재의 세립분 생성이 감소하고 지지력이 증가함을 알 수 있었다. 또한 교반을 함께할 경우 추가적인 역학적 개량 효과를 통해 골재 파쇄값이 30.3%로 감소하고 노상토지지력비는 137.7%로 증가하였다. 본 연구에서 기술된 이산화탄소 처리 기술의 현장 적용 시 건설 산업의 탄소배출을 효과적으로 줄일 수 있을 것으로 보인다.

• 한국환경복원기술학회지
• /
• 제13권3호
• /
• pp.128-142
• /
• 2010

This study examined the actual conditions of quarries. aiming to offer preliminary data to help with restoration efforts of quarries after extracting rock material. The results are as follows. As for the current state of business, a classification of all sites surveyed showed the ratio of ceased operations: ongoing operations: quarries under restoration to be 58:5:37. Classified by the permit area, the ratio of the number of quarries with areas less than $20,000m^2$ (2ha) : between $20,000m^2$ (2ha) and $50,000m^2$ (5ha) : $50,000m^2$ (5ha) or more was 15:60:25. The classification by use of the rocks showed the ratio of construction aggregate (such as civil construction material) : building material : craft material to be 60:28:12. The ratio of quarrying methods of bench cut : slope quarry : vertical quarry wall is 40:18:42. It is indicated that 85% of all quarries surveyed are difficult to reclaim while 15% seem to be easier to restore. Among all surveyed, 34 sites were considered to be extremely difficult to restore. 17 of the 34 sites (50%) were quarry walls almost vertical that have been neglected after extraction. 16 of them (47%) were underground quarries that have left quarry walls deep under the ground. For the remaining 1 site, there doesn't seem to be any need for reclamation as it became totally flat after the extraction.