• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.1
• /
• pp.33-47
• /
• 2022

In this study, distribution of submarine sand ridges in the coastal waters of Korea was surveyed using multibeam echo sounder data, and the topographic characteristics of each region were identified. For this purpose, the DEM (Digital Elevation Model) data was generated using depth data obtained from the Yellow Sea and the South Sea by Korea Hydrographic and Oceanographic Agency, and then applied the TPI (Topographic Position Index) technique to precisely extract the boundary of the sand ridges. As a result, a total of 200 sand ridges distributed in the coastal waters were identified, and the characteristics of each region of the sedimentary sediments were analyzed by performing statistical analysis on the scale (width, length, perimeter, area, height) and shape (width/length ratio, height/width ratio, linear·branch type, exposure·non-exposure type). The results of this study are expected to be used not only for coastal navigational safety, but also for marine naming support, marine aggregate resource identification, and fisheries resource management.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.2
• /
• pp.37-50
• /
• 2015

Objective : In order to understand the scale of medicinal expenditure in the Korean medicine, an analysis has been made of Korean National Health Account and statistic archives used to estimate the Korean National Health Account and also of such archives as are contributory to learn the scale of total health expenditures in the Korean medicine. Method : From the Korean National Health Account archives, an analysis has been made of National health insurance statistic annual reports, National health insurance non-payment items, Korean Economic Census (The Service Industy Survey), and Korea Health Panel data. Moreover, in order to know the sales of overall Korean medicine clinics, relevant data have been utilized and cited from investigations into National tax statistics, Korean medicine medical institutions and Korean medicines used, and current states of medicinal herbs and Korean medicine industry. Results : It is found that the average scale of each section of the medical expenditures archives in the Korean medicine in 2012 was KRW 3.5638 billion and that the average medical expenditures in the Korean medicine derived from Total Health Expenditure, The Service Industy Survey, National tax statistic, and Korean medicine industry are approximately KRW 3.3901, 3.4796, 3.7218 and 3.9634 billion. And the average expenditures derived from National health insurance patients and Korea Health Panel data are 2.5162 and 2.2292 billion won and those from the users and consumers of Korean medicines and herbs are 5.6,461 billion won. In order to verify the appropriateness of estimated medical expenditures in the Korean medicine included in the archives, an analysis has been made of uninsured costs which come from the aggregate sales amount surveyed minus health insurance treatment expenditures and it is found that the ratio of insured costs against total health expenditures in 2006 was 50.67% and 41.92% in 2012 and that the ratio based on National tax statistics and The Service Industy Survey was 52.19% and 49.28% in 2006 and 50.54% and 50.64% in 2012 and that the ratio of uninsured costs against Korean medicines and herbs and Korean medicine industry was 37.5% and 58.27% in 2013. Conclusion : It calls for the improvement of the accuracy of an investigation into Total Health Expenditure which comprise the actual conditions of health insurance and Korea Health Panel, the development of statistic schemes for understanding and classifying medical expenditures of all the Korean medicine medicinal institutions like medicinal clinics, and enhanced methods for independent panels to comprehensively collect and analyze the number of sampled Korean medicine medical institutions.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.39 no.1
• /
• pp.29-48
• /
• 2014

The recent keyword advertising does not reflect the individual customer searching pattern because it is focused on each keyword at the aggregate level. The purpose of this research is to observe processes of customer searching patterns. To be specific, individual deal-proneness is mainly concerned. This study incorporates location as a control variable. This paper examines the relationship between customers' searching patterns and probability of purchase. A customer searching session, which is the collection of sequence of keyword queries, is utilized as the unit of analysis. The degree of deal-proneness is measured using customer behavior which is revealed by customer searching keywords in the session. Deal-proneness measuring function calculates the discount of deal prone keyword leverage in accordance with customer searching order. Location searching specificity function is also calculated by the same logic. The analyzed data is narrowed down to the customer query session which has more than two keyword queries. The number of the data is 218,305 by session, which is derived from Internet advertising agency's (COMAS) advertisement managing data and the travel business advertisement revenue data from advertiser's. As a research result, there are three types of the deal-prone customer. At first, there is an unconditional active deal-proneness customer. It is the customer who has lower deal-proneness which means that he/she utilizes deal-prone keywords in the last phase. He/she starts searching a keyword like general ones and then finally purchased appropriate products by utilizing deal-prone keywords in the last time. Those two types of customers have the similar rates of purchase. However, the last type of the customer has middle deal-proneness; who utilizes deal-prone keywords in the middle of the process. This type of a customer closely gets into the information by employing deal-prone keywords but he/she could not find out appropriate alternative then would modify other keywords to look for other alternatives. That is the reason why the purchase probability in this case would be decreased Also, this research confirmed that there is a loyalty effect using location searching specificity. The customer who has higher trip loyalty for specificity location responds to selected promotion rather than general promotion. So, this customer has a lower probability to purchase.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.7
• /
• pp.846-851
• /
• 2005

In this paper, we propose Genetic Algorithms(GAs)-based Optimized Polynomial Neural Networks(PNN). The proposed algorithm is based on Group Method of Data Handling(GMDH) method and its structure is similar to feedforward Neural Networks. But the structure of PNN is not fixed like in conventional neural networks and can be generated in a dynamic manner. As each node of PNN structure, we use several types of high-order polynomial such as linear, quadratic and modified quadratic, and it is connected as various kinds of multi-variable inputs. The conventional PNN depends on the experience of a designer that select the number of input variables, input variable and polynomial type. Therefore it is very difficult to organize optimized network. The proposed algorithm leads to identify and select the number of input variables, input variable and polynomial type by using Genetic Algorithms(GAs). The aggregate performance index with weighting factor is proposed as well. The study is illustrated with tile NOx omission process data of gas turbine power plant for application to nonlinear process. In the sequel the proposed model shows not only superb predictability but also high accuracy in comparison to the existing intelligent models.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.593-600
• /
• 2006

Joint opening of jointed concrete pavement is caused by change in temperature and humidity of adjoined slab. The magnitude of joint opening influences on the load-transfer-efficiency and the behavior of sealant. If temperature or humidity decreases, joint opening increases. Generally maximum joint opening of a given joint is predicted by using AASHTO equation. While different magnitudes of joint opening at the individual joints have been observed in a given pavement section, AASHTO equation is limited to predict average joint opening in a given pavement section. Therefore the AASHTO equation may underestimate maximum joint for the half of joint in a given pavement section. Joints showing larger opening than the designed may experience early joint sealant failure, early faulting. Also unexpected spalling may be followed due to invasion of fine aggregate into the joints after sealant pop-off. In this study, the variation of the joint opening in a given pavement section was investigated based on the LTPP SMP data. Factors affecting on the variation are explored. Finally a probabilistic joint opening model is developed. This model can account for the reliability of the magnitude of joint opening so that the designer can select the ratio of underestimated joint opening.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.465-472
• /
• 2012

This research aims to find an effective mixing method for controlled low strength material (CLSM) using diverse recycled industrial byproducts. This study is a fundamental research to develop and commercialize a resource-recycling CLMS that can greatly contribute to cost reduction and environmental stress relief. In the past, few studies have been performed on CLSM in Korea. This research is expected to provide fundamental data not only for development and commercialization of the resource-recycling CLSM satisfying required material performances but also serve as a ground breaking study on utilization of recycled material in construction industry and ultimately leading to advanced resource-recycling practices at national level. From the comprehensive analysis of minimum unit quantity for maximum strength and material segregation prevention, it was found that the optimal mixing condition for mixing FSD, RSID and SD material to filler-aggregate ratio (f/a) was approximately 50.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.282-290
• /
• 2013

In this study, the adjustment range of mixture factor with replacement mineral admixture was reviewed to secure the mixture change data of high volume concrete compared to general concrete. When changing the concrete mix to high volume concrete within the universal concrete mixing, the adjustment range of mixture to ensure optimum quality is as follows. Unit-water content is $20{\sim}30kg/m^3$ downward. Fine aggregate ratio dropped by approximately 1% when W/B was reduced by 5%, and it is reduced by approximately 0.12% when there is a 5% increase in the total replacement rate. When the FA replacement rate was increased by 5%, the AE agent was approximately 20% to 30% higher compared with the conventional one. When the FA and BS replacement rate rose by 5%, W/B was reduced by about 1 to 4%.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.3
• /
• pp.128-142
• /
• 2010

This study examined the actual conditions of quarries. aiming to offer preliminary data to help with restoration efforts of quarries after extracting rock material. The results are as follows. As for the current state of business, a classification of all sites surveyed showed the ratio of ceased operations: ongoing operations: quarries under restoration to be 58:5:37. Classified by the permit area, the ratio of the number of quarries with areas less than $20,000m^2$ (2ha) : between $20,000m^2$ (2ha) and $50,000m^2$ (5ha) : $50,000m^2$ (5ha) or more was 15:60:25. The classification by use of the rocks showed the ratio of construction aggregate (such as civil construction material) : building material : craft material to be 60:28:12. The ratio of quarrying methods of bench cut : slope quarry : vertical quarry wall is 40:18:42. It is indicated that 85% of all quarries surveyed are difficult to reclaim while 15% seem to be easier to restore. Among all surveyed, 34 sites were considered to be extremely difficult to restore. 17 of the 34 sites (50%) were quarry walls almost vertical that have been neglected after extraction. 16 of them (47%) were underground quarries that have left quarry walls deep under the ground. For the remaining 1 site, there doesn't seem to be any need for reclamation as it became totally flat after the extraction.

• International Commerce and Information Review
• /
• v.16 no.4
• /
• pp.363-384
• /
• 2014

The adequate measurement of government expenditure efficiency for Energy Technology Development is a difficult empirical issue and the literature on it, particularly when it comes to aggregate and international data. Contribution in this study is threefold: first this study analyze the adequate measurement of government expenditure efficiency on Energy Technology sector of 24 OECD countries and korea. Second this study reconstruct efficiency composite indicators, named "Energy Technology Development Interest level indicator". Third this study assesses the efficiency of government expenditure for Energy Technology Development. The results can be summarized as follow: Korea's government expenditure efficiency for Energy Technology Development is highly ranked among 25 OECD countries based on Energy Technology Development R&D Budgets and Energy Technology Development R&D Budgets per thousand units of GDP indicators. However, Korea's ranking has fallen to 20th. The assessment suggests that government will be have to provide more government expenditure to enhance the efficiency on Energy.

• International Commerce and Information Review
• /
• v.16 no.4
• /
• pp.307-330
• /
• 2014

The purpose of this study is to estimation of Technical Barriers of Trade(TBT) between Korea and China. TBT is one of the key issues in which both governments are interested since the Korea-China FTA negotiations had launched in 2012. In this paper, we aggregate nine country HS codes from World Bank and AIO codes from JETRO. Our estimation model based on modified price wedge approach differentiate previous researches in the sense that it covers all manufacture industries and uses nine country data set. Estimation results confirm the importance of TBT showing that TBT high ranking items significantly overlap high ranking export items. We also find that the size of Chinese TBT are much larger than that of Korean TBT, implying that Korean government needs smart and well prepared strategy for key items in TBT/FTA negotiation with Chinese government.