• 자원리싸이클링
• /
• 제31권5호
• /
• pp.42-51
• /
• 2022

현재 우리나라에서 보유한 골재자원은 개발수요증가 및 건설투자확대 등으로 고갈이 예상되고 있으며, 정부에서는 향후 골재자원의 원활한 공급을 위해 다양한 해결책을 모색하고 있다. 순환골재는 폐콘크리트에서 추출한 골재로 일반골재에 비해 품질이 낮으나, 전처리, 혼화재 적용 등을 통해 일반콘크리트와 유사한 품질을 유도할 수 있는 것으로 알려져 있다. 순환골재 활용성을 극대화할 수 있는 방안은 보도블럭, 호안블럭 등 콘크리트 2차 제품에 적용하는 것으로 예상되므로 본 연구에서는 일반골재콘크리트 호안블럭과 유사한 품질을 나타낼 수 있는 순환골재콘크리트 호안블럭의 생산가능성을 분석하였다. 이를 위해 순환골재 및 준조강시멘트의 적용량과 증기양생이력을 콘크리트 시험변수로 설정하였으며, 호안블럭 시험에서는 최적의 순환골재콘크리트와 GFRP 보강근 적용에 따른 하중저항성능을 평가하였다. 실험결과, 준조강시멘트와 순환골재를 혼입한 콘크리트는 양생온도 및 지속시간의 변화에도 탈형강도를 만족하였다. 재령 28일 강도에서는 증기양생이력에 따라 압축강도의 증감이 확인되었으며, 특히 시멘트량을 감소시킨 변수도 증기양생이력의 조절을 통해 일반콘크리트와 동등한 성능이 발현되었다. 순환골재콘크리트 호안블럭의 재하시험결과, 보강비에 따라 다르나 일반 호안블럭과 유사한 성능을 나타내었다. 따라서 순환골재콘크리트의 낮은 품질특성은 배합 및 양생방법의 조절과 적정 보강재 적용을 통해 보완이 가능할 것으로 판단된다.

• 환경영향평가
• /
• 제14권5호
• /
• pp.317-335
• /
• 2005

This paper is primarily intended to propose a new concept of "aggregate control of road density" which is defined as the area-wide road surface per watershed area. An empirical study for experimental sites was conducted to confirm how a standard GIS technology can be used to assist in estimating the road density in terms of total volume threshold control. Guidelines for a replicable methodology are presented to provide a strong theoretical basis for the standardization of factors involved in the estimation of the road space threshold; the meaningful classification of road types, delination of watershed boundary, interpretation for distribution trends of road density etc. A variety of visual maps using overlay analysis can be generated over large areas quickly and easily to show the fact that some degree of road space already exists in the experimental sites. They could be used as an evidence to limit further construction of road network in comparison with other tributary watershed. It is anticipated that this research output could be used as a valuable reference to confirm the potential of introducing the new concept of "site specific road density" to support more scientific and objective decision-making in the process of road construction project.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.407-410
• /
• 2010

This paper presents an advanced load allocation algorithm in Direct Load Control(DLC) system. It is important to aggregate a various demand side resource which is surely controllable at the peak power time for a successful DLC system. Previous load allocation algorithm appropriate for DLC system is based on interchanged information, but, this algorithm can not derive optimal solutions. In this paper, we develop the optimal algorithm and the new load allocation algorithm in polynomial time. The simulation results show that the proposed heuristic algorithm for DLC system is very effective.

• 한국건축시공학회지
• /
• 제14권6호
• /
• pp.523-529
• /
• 2014

국내에서는 많은 양의 패류가 생산되고 있으나, 이로 인해 발생하는 대량의 패각을 처리하는데 많은 어려움을 겪고 있다. 따라서 본 연구에서는 이러한 패각을 대량으로 처리하기 위하여 건설재료로서의 가능성을 평가하고자 한다. 모르터의 잔골재를 패각으로 치환하여 흡수율, 압축강도를 측정하고 계면결합 형태를 관찰하였다. 대체적으로 패각의 치환율이 증가함에 따라 흡수율은 증가하였으며, 압축강도는 감소하였다. 예외적으로 꼬막 패각을 치환한 모르터는 치환율이 증가함에 따라 압축강도가 증가하였다. 패각 치환율의 증가에 따른 흡수율의 증가 및 압축강도의 감소는 패각 주위에 발생한 다공성 때문인 것으로 파악되었으며, 꼬막 패각을 치환한 모르터는 패각과 시멘트 입자간의 계면결합 형태가 양호하였기 때문에, 오히려 강도가 상승한 것으로 판단된다.

• 한국화재소방학회논문지
• /
• 제25권6호
• /
• pp.8-13
• /
• 2011

고강도 콘크리트는 구조적인 장점에도 불구하고 화재 시 폭렬과 함께 취성적인 파괴를 나타내는 단점으로 인하여 실구조물에 적용 시 주의하여 사용하여야 한다. 신축되는 고강도 콘크리트구조물의 폭렬제어를 위하여 많은 연구가 진행되어 왔으나, 사용 중인 고강도콘크리트 구조물의 폭렬제어방안에 대한 연구가 부족한 실정이다. 본 연구에서는 사용 중인 고강도 콘크리트 구조물의 내화성능을 향상시키기 위한 내화 마감재로서 미세공극과 유기섬유를 활용한 공극구조의 개선으로 단열성을 확보한 신개념의 무기질 내화 모르타르를 개발하고자 한다. 잔골재 종류, PP섬유 혼입량 및 마감두께를 변수로 하는 내화모르타르에 대한 재료시험 및 실구조물에 대한 내화시험을 통하여 내화성능을 평가하였다. 재료시험결과 다공질의 경량골재를 사용한 모르타르의 열전도율은 일반 잔골재에 비하여 크게 낮아졌으며, 기둥부재 내화시험결과 경량 잔골재의 사용으로 내화시간이 20분, 마감두께를 10 mm에서 20 mm로 증가시킬 경우 10분 그리고 PP섬유를 0.6 % 혼입함으로써 4분 증가하였다.

• Restorative Dentistry and Endodontics
• /
• 제43권3호
• /
• pp.18.1-18.12
• /
• 2018

Objectives: This study compared the retention of BioAggregate (BA; Innovative BioCeramix) and mineral trioxide aggregate (MTA; Angelus) as coronal plugs after applying different intracanal medications (ICMs) used in regenerative endodontic. Materials and Methods: One-hundred human maxillary central incisors were used. The canals were enlarged to a diameter of 1.7 mm. Specimens were divided into 5 groups (n = 20) according to the ICM used: calcium hydroxide (CH), 2% chlorhexidine (CHX), triple-antibiotic paste (TAP), double-antibiotic paste (DAP), and no ICM (control; CON). After 3 weeks of application, ICMs were removed and BA or MTA were placed as the plug material (n = 10). The push-out bond strength and the mode of failure were assessed. The data were analyzed using 2-way analysis of variance, the Tukey's test, and the ${\chi}^2$ test; p values < 0.05 indicated statistical significance. Results: The type of ICM and the type of plug material significantly affected bond strength (p < 0.01). Regardless of the type of ICM, BA showed a lower bond strength than MTA (p < 0.05). For MTA, CH showed a higher bond strength than CON, TAP and DAP; CHX showed a higher bond strength than DAP (p < 0.01). For BA, CH showed a higher bond strength than DAP (p < 0.05). The mode of failure was predominantly cohesive for BA (p < 0.05). Conclusions: MTA may show better retention than BA. The mode of bond failure with BA can be predominantly cohesive. BA retention may be less affected by ICM type than MTA retention.

• Advances in concrete construction
• /
• 제15권6호
• /
• pp.419-430
• /
• 2023

In this study, the effect of two types of aggregates (fly ash aggregate and shale aggregate) on the density, strength, and durability of preplaced lightweight aggregate concrete (PLWAC) was studied. The results showed that the 7 - 28 days strength of concrete prepared with fly ash aggregates (high water absorption rate) significantly increased, which could attribute to the long-term water release of fly ash aggregates by the refined pore structure. In contrast, the strength increase of concrete prepared with shale aggregates (low water absorption rate) is not apparent. Although PLWAC prepared with fly ash aggregates has a lower density and higher strength (56.8 MPa @ 1600 kg/m³), the chloride diffusion coefficient is relatively high, which could attribute to the diffusion paths established by connected porous aggregates and the negative over-curing effect. Compared to the control group, the partial replacement of fly ash aggregates (30%) with asphalt emulsion (20% solid content) coated aggregates can reduce the chloride diffusion coefficient of concrete by 53.6% while increasing the peak load obtained in a three-point bending test by 107.3%, fracture energy by 30.3% and characteristic length by 103.5%. The improvement in concrete performance could be attributed to the reduction in the water absorption rate of aggregates and increased energy absorption by polymer during crack propagation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권3호
• /
• pp.151-158
• /
• 2007

최근 들어 정부의 환경정책이 폐기물의 발생량을 줄이되 발생되는 산업부산물을 적극적으로 재활용하는 자원순환형 폐기물 관리로 추진됨에 따라 산업 각 부분에서 발생되는 산업부산물의 재활용에 대한 연구 및 적용성이 활발히 진행되고 있다. 최근 잔골재의 대체재로 주목 받고 있는 동슬래그는 본격적인 활용이 진행된다면 잔골재 수급에 많은 도움을 줄 것으로 예상되나 천연골재에 비해 높은 비중 및 대체율이 30%를 초과하면 재료분리가 발생하는 등의 단점 또한 지적되고 있다. 본 연구에서는 동슬래그의 혼입 시 발생되는 블리딩의 발생을 혼화제의 사용을 통하여 억제하고 압축강도 시험 결과 등의 종합적인 고찰을 통하여 잔골재 대체시의 동슬래그의 적정 혼입률을 도출하고자 하였다.

• International Journal of Computer Science & Network Security
• /
• 제23권4호
• /
• pp.55-68
• /
• 2023

In recent years, the Television White Space (TVWS) has attracted the interest of many researchers due to its propagation characteristics obtainable between 470MHz and 790MHz spectrum bands. The plenty of unused channels in the TV spectrum allows the secondary users (SUs) to use the channels for broadband services especially in rural areas. However, when the number of SUs increases in the TVWS wireless network the aggregate interference also increases. Aggregate interferences are the combined harmful interferences that can include both co-channel and adjacent interferences. The aggregate interference on the side of Primary Users (PUs) has been extensively scrutinized. Therefore, resource allocation (power and spectrum) is crucial when designing the TVWS network to avoid interferences from Secondary Users (SUs) to PUs and among SUs themselves. This paper proposes a model to improve the resource allocation for reducing the aggregate interface among SUs for broadband services in rural areas. The proposed model uses joint power and spectrum hybrid Firefly algorithm (FA), Genetic algorithm (GA), and Particle Swarm Optimization algorithm (PSO) which is considered the Co-channel interference (CCI) and Adjacent Channel Interference (ACI). The algorithm is integrated with the admission control algorithm so that; there is a possibility to remove some of the SUs in the TVWS network whenever the SINR threshold for SUs and PU are not met. We considered the infeasible system whereby all SUs and PU may not be supported simultaneously. Therefore, we proposed a joint spectrum and power allocation with an admission control algorithm whose better complexity and performance than the ones which have been proposed in the existing algorithms in the literature. The performance of the proposed algorithm is compared using the metrics such as sum throughput, PU SINR, algorithm running time and SU SINR less than threshold and the results show that the PSOFAGA with ELGR admission control algorithm has best performance compared to GA, PSO, FA, and FAGAPSO algorithms.

• ETRI Journal
• /
• 제30권2호
• /
• pp.238-248
• /
• 2008

At the extremes of the complexity-performance plane, there are two exemplary QoS management architectures: Integrated Services (IntServ) and Differentiated Services (DiffServ). IntServ performs ideally but is not scalable. DiffServ is simple enough to be adopted in today' core networks, but without any performance guarantee. Many compromise solutions have been proposed. These schemes, called quasi-stateful IntServ or stateful DiffServ, however, have not attracted much attention due to their inherently compromising natures. Two disruptive flow-based architectures have been recently introduced: the flow-aware network (FAN) and the flow-state-aware network (FSA). FAN's control is implicit without any signaling. FSA's control is even more sophisticated than that of IntServ. In this paper, we survey established QoS architectures, review disruptive architectures, discuss their rationales, and points out their disadvantages. A new QoS management architecture, flow-aggregate-based services (FAbS), is then proposed. The FAbS architecture has two novel building blocks: inter-domain flow aggregation and endpoint implicit admission control.