• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.282-283
• /
• 2006

Densification behavior of nano-agglomerate powder during pressureless sintering of Fe-Ni nanopowder was investigated in terms of diffusion kinetics and microstructural development. To understand the role of agglomerate boundary for sintering process, densification kinetics of Fe-Ni nano-agglomerate powder with different agglomerate size was investigated. It was found that activation energy for densification was lower in the small-sized agglomerate powder. The increase in the volume fraction of inter-agglomerate boundary acting as high diffusion path might be responsible for the enhanced diffusion process.

• 상하수도학회지
• /
• 제24권5호
• /
• pp.527-536
• /
• 2010

Although the bubble-floc agglomerate floated and formed the float layer on the surface of the water in the DAF process, after inducing in the thickening tank a part of the bubble-floc agglomerate come up again to the surface and the other is settled at the bottom of the tank. The bubble-floc agglomerate divided into two group as the scum on the surface and the sludge of the bottom gives rise to operational troubles for the thickening process. In order to find out the cause of break-up and the effective thickening method for sludge from the DAF process, the composition of the bubble-floc agglomerate was investigated and a series of flotation experiments carried out. There was no difference of composition between the scum on the surface and the sludge of the bottom in the thickening tank. The coagulation was not effective to improve the trouble that the bubble-floc agglomerate divided into the scum and the sludge. It was estimated that for the bubble-floc agglomerate of thickening tank the trouble was caused by not the change or the difference of chemical composition but whether the bubble-floc agglomerate hold bubbles. Furthermore, for the effective thickening of sludge from the DAF process, it is required an additional flotation applied the AS ratio depending upon the solid concentration of sludge as the operation parameter.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.156-160
• /
• 2019

The changes in the dispersion of carbon black in liquid polyisoprene under shear flow with time have been investigated by time-resolved ultra small-angle X-ray scattering (USAXS) method. The analyses of USAXS profile immediately after the start of shear flow clarified that the aggregates of carbon black with a mean radius of gyration of 14 nm and surface fractal dimension of 2.5 form the fractal network structure with mass-fractal dimension of 2.9. After the application of the shear flow, the scattering intensity increases with time at the observed whole entire q region, and then the a shoulder appears at $q=0.005nm^{-1}$, indicating that the agglomerate is broken and becomes smaller by shear flow. The analysis by the Unified Guinier/Power-law approach yielded several characteristic parameters, such as the sizes of aggregate and agglomerate, mass-fractal dimension of agglomerate, and surface fractal dimension of the primary particle. While the mean radius of gyration of the agglomerate decreases with time, the mean radius of gyration of the aggregate, mass fractal dimension, and surface fractal dimension don't change with time, indicating that the aggregates peel off the surface of the agglomerate.

• Journal of Welding and Joining
• /
• 제14권6호
• /
• pp.101-108
• /
• 1996

In this study, WC-l7wt% Co composite powder for thermal spray was fabricated by spray drying method. The agglomerated composite powder had spheroidal morphology and the particle size distribution was 20~60${\mu}{\textrm}{m}$. WC and Co were distributed homogeneously. However, the strength of the spray-dried agglomerate was low due to the pores within the agglomerate. Therefore, the spray-dried agglomerate was broken down during HVOF thermal spray and the microstructure was inhomogeneous with many pores within the coating layer. And the decomposition of WC to W and $W_{6}$ $C_{2.54}$ was accelerated. The strength and flowability of the agglomerate were greatly improved by sintering heat treatment(110$0^{\circ}C$, 1 hour, hi atmosphere), and then the coating layer showed dense and homogeneous microstructure with well-developed splats. The hardness of the coating layer was H $v_{300}$ = 1072.2.2.

• 한국분말재료학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2013

The key concept of nanopowder agglomerate sintering (NAS) is to enhance material transport by controlling the powder interface volume of nanopowder agglomerates. Using this concept, we developed a new approach to full density processing for the fabrication of pure iron nanomaterial using Fe nanopowder agglomerates from oxide powders. Full density processing of pure iron nanopowders was introduced in which the powder interface volume is manipulated in order to control the densification process and its corresponding microstructures. The full density sintering behavior of Fe nanopowders optimally size-controlled by wet-milling treatment was discussed in terms of densification process and microstructures.

• 한국축산식품학회지
• /
• 제18권1호
• /
• pp.50-56
• /
• 1998

Scanning electron microscopic appearance of infant milk formula indicated that mostly agglomerate with few or more diverse number of particles and also apple like as well as typical feature of drying in raw milk. Small particle of infant milk formula become agglomerate progressively. Some sample represent crystalline rectangular among the globular agglomerates which seem to be a different composites or those of solubility. Some sample showed the irregular porosity at central sec-scanning electron microscopic study between Korea and European products.

• 한국환경과학회지
• /
• 제5권5호
• /
• pp.593-603
• /
• 1996

용응탄산염 연료전지의 산소전극성능모사를 위한 이중기공구조의 filmed agglomerate model을 연구하였다. 이 모델에서는 전극과 전해질 계면의 물리, 화학적인 현상 및 전극반응기구를 고려하여 정상상태 에서 전극의 특성을 조업조건에 따라 표시할 수있다. 기존의 연구에서 기하학적인 구조를 가정하여 전극반응면적을 이론적으로 계산한 반면에 본 연구에서는 porosimeter를 이용한 기공도와 기공구조 분포 측정자료를 이용한 방법을 제시하였다. 계산결과는 전극재질, 기체조성, 전극두께, agglomerate 기공도 및 전해질 막의 두께에 따른 영향을 전류밀도와 과전압의 관계로 표시하였다. 또한 전극 재질로 perovskite (La0.8Sr0.2CoO3)와 NiO를 사용하여 실제전지를 이용한 성능을 측정하여 이론치와 비교하였다. 두전 극의 반쪽전지 실험에서 유사한 성능을 나타내었다. Perovskite 전극은 전극 기공도 65%, agglomerate 기공도 12% 그리고 전극두께 1.5~2mm에서 최적의 결과를 보여주었다. NiO전극의 경우 peroxide 반응기구에서 superoxide 반응기구의 계산결과보다 실험치와 일치하는 좋은 결과를 보였다.

• 한국정보전자통신기술학회논문지
• /
• 제4권1호
• /
• pp.61-67
• /
• 2011

YAG:Ce 형광제 제조에 있어서 공침(co-precipitation) 후 n-butanol 공비증류(azeotropic distillation)시 HMDS(hexadimethyldisilazane)를 첨가하였을 때, 형광체가 광학특성에 미치는 영향에 관하여 연구하였다. 물과 유기용제에 의한 공비증류 시 유기용제의 분자량이 크면 표면의 수소결합이 유기용제로 치환됨으로서 표면장력을 감소시켜 분체의 원형화(conglobation)와 응집(agglomerate)을 감소시키므로 유기용제로 n-butanol보다 분자량이 큰 HMDS을 첨가하였다. N-butanol 만을 사용한 형광체가 HMDS를 첨가한 것 보다 응집(agglomerate)되는 현상이 감소하였으며 우수한 광학적 특성을 나타내었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.158-163
• /
• 1996

Attritor mill로 분쇄처리된 $UO_2$-30mo1%CeO2$_2$(masterblend) 분말을 turbular mixer와 attritor mill 에서 $UO_2$와 혼합, $UO_2$-5mol%CeO$_2$ 분말을 만들고, 이를 통해 분말처리 및 소결분위기가 각 성형체의 소결거동에 미치는 영향을 연구하였다. $UO_2$-30mo1%CeO$_2$ 분말을 attritor mill로 1 시간동안 분쇄하면 평균 분말크기는 3.7 $\mu\textrm{m}$ 이었다. Turbular mixer에서 만들어진 $UO_2$-5mol%CeO$_2$ 분말이 H$_2$ 및 Ar-4%H$_2$ 분위기에서 소결되면, 분말처리 방법에 따라서 소결밀도는 각각 10.07-10.11, 9.81-9.85 g/㎤이었다. 이러한 방법으로는 masterblend 분쇄처리 과정에 만들어진 agglomerate 는 소결이 거의 이루어지지 않아서 소결체내에 그대로 잔존되었다. Agglomerate는 그 내부에 균열이 생성되어 있었고, 또한 $UO_2$ 지지내의 확산도 방해하여 기지내부에도 큰 기공들이 많이 분포하였다. 희석혼합을 turbular mixer 대신 attritor mill에서 하게되면, 밀도는 H$_2$ 및 Ar-4%H$_2$ 분위기에서 각각 10.54, 10.39 g/㎤ 이었으며, 결정립크기는 5, 9.5 $\mu\textrm{m}$ 이었다. 이 경우에는 소결체내에 agglomerate가 거의 잔존하지 않았다.

• 한국분말재료학회지
• /
• 제15권4호
• /
• pp.271-278
• /
• 2008

Sintering behavior of iron nanopowder agglomerate compact prepared by slurry compaction method was investigated. The Fe nanopowder agglomerates were prepared by hydrogen reduction of spray dried agglomerates of ball-milled $Fe_2O_3$ nanopowder at various reduction temperatures of $450^{\circ}C$, $500^{\circ}C$ and $550^{\circ}C$, respectively. It was found that the Fe nanopowder agglomerates produced at higher reduction temperature have a higher green density compact which consists of more densified nanopowder agglomerates with coarsed nanopowders. The sintering behavior of the Fe nanopowder agglomerates strongly depended on the powder packing density in the compact and microstructure of the agglomerated nanopowder. It was discussed in terms of two sintering factors affecting the entire densification process of the compact.