• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.1
• /
• pp.11-17
• /
• 2014

This study analyzed the effects of specific factors on the fluorescence index of the fluorescent whitening agent (FWA) that is used for internal addition. The specific factors were identified by the literature review, and a statistical survey was carried out to analyze the effects of those factors on the fluorescence index. Bulk, grammage, fillers and internal sizing agents were selected as the specific factors. The paper samples were prepared with internal FWA in a laboratory. The fluorescence indices of the model papers were measured, and p-values of the specific factors on the fluorescence index were calculated by the SPSS program. Most of p-values were greater than 0.05, so the specific factors do not have a significant impact on the internal FWA fluorescence index.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.5
• /
• pp.59-65
• /
• 2009

Adsorption of an oil-proof agent (OPA）onto cellulose fibers during the papermaking process was investigated using UV-Vis spectrophotometry by measuring the OPA concentration decrease in the solution. From the calibration curve, the spectrum were converted to chemical concentrations in solution, from which the amount adsorbed onto the fiber surface could be determined. Thus, it was possible to determine the total amount adsorbed onto the fibers and in solution. Using this approach, we studied the adsorption behavior of the OPA onto the fiber surface and derived its, ${\Gamma}^s_t={\Gamma}^s_{\infty}(1-e^{-k_{\alpha}t})$. The values of the parameters kaand ${\Gamma}^s_{\infty}$ were determined using a mathematic model based on a mass transfer equation. Ultimately, a complete was derived: $Q={\alpha}{\cdot}\sum\limits_{i-1}^m{\pi}d_il_i{\cdot}M_A{\cdot}(1-e^{-k_{\alpha}t})/A_N$.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.511-515
• /
• 2001

Many intelligent agent systems are known to incorporate BDI architecture for cognitive reasoning. Since this architecture contains all the knowledge of world model and reasoning rule, it is very complex and difficult to handle. This paper describes a methodology to design and implement BDI architecture, BDIAXml based on XML for multi-agent systems. This XML-based BDI architecture is smaller than any other BDI architecture because it separates knowledge for reasoning from domain knowledge and enables knowledge sharing using XML technology. Knowledge for BDI mental state and reasoning is composed of specific XML files and these XML files are stored into a specific knowledge server. Most systems using BDIAxml architecture can access knowledge from this server. We apply this BDIAXml system to domain of Hospital Information System and show that this architecture performs more efficiently than other BDI architecture system in terms of knowledge sharing, system size, and ease of use.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.439-450
• /
• 2001

Mobile agent is one of the promising ways of overcoming network load and latency. It is also a new software paradigm including those concepts of client/server, applet/servelet, and code-on-demand. In this paper, a new mobile agent concept with flexible replay scheme is proposed, which can deal with embarrassing situation when replying results should be accomplished in various distributed applications. For example, they are 1) a burden of bulky result, 2) a need of different replay scheme dependent on work type, 3) connection failure to the target node, and 4) a need of fast migration to next node to keep the itinerary. Regarding the source node, there may be another situation that it wants to be aware of whether its wi가 is completed or not. Three kinds of reply schemes are proposed for dealing flexibly with such situations. They are based on priority reply list where nodes to be replied are stored according to their priorities. An experimental supply chain management model using the proposed reply schemes is designed and implemented. It is one of good distributed applications appropriate for our reply schemes, because it requires different reply schemes according to work types and it is important to gather required information in time.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.1
• /
• pp.57-67
• /
• 2008

Recently, Korean shipbuilding industry is keeping up the position of world wide No. 1 in world shipbuilding market share. It is caused by endless efforts to develope new technologies and methods and fast development of IT technologies in Korea, to raise up its productivities and efficiency in shipbuilding industry with many kinds of optimizing methods including genetic algorithm or artificial life algorithm... etc. In this paper, we have suggested the artificial life algorithm with relay search micro genetic algorithm. and we have improved a defect of simple genetic algorithm for its slow convergence speed and added a variety of solution candidates with applying relay search simple genetic algorithm. Finally, we have developed intelligent agent system for ship CAE modeling. We have tried to offer some conveniences a ship engineer for repeated ship CAE modeling by changing ship design repeatedly and to increase its accuracy of a ship model with it.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.672-678
• /
• 2013

Although the basalt fiber has superior fire-resistance and chemical resistance, it has many disadvantages in its applications. Generally, the tensile and loop strengths of basalt fiber were decreased with generated frictional heat during industial appplications. To solve this problem, polytetrafluoroethylene (PTFE) coating system was introduced and a sutable coating condition was evaluated. The basalt fiber was pre-treated with triethoxytrifluoropropylsilane (TMTFPS) at various pHs and then coated with PTFE dispersions with penetrating agent sodium bis(2-ethylhexyl)sulfo succinate (DOS-Na) to increase the tensile and loop strengths as well as to reduce the fibril during working. A universial testing machine (Instron Model 3366) was used to measure tensile and loop strengths. When the PTFE dispersion with 0.25 wt% of DOS-Na was coated on the surface of basalt fiber after pre-treating with 5 wt% of PTFE, the highest tensile and loop strengths were reached to 3.5 gf/D and 2.4 gf/D, respectively.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.35-43
• /
• 2004

Reduction of fresh water consumption and effluent discharge provide diverse advantages in raw materials and energy savings. Papermaking system closure, however, reduces the efficiency of additives, decreases retention and dewatering, and causes many other Problems in papermaking. Accumulation of inorganic and organic substances in the process white water is the prime cause of these problems. Understanding of the accumulation phenomena of the detrimental substances in the papermaking process is of great importance for papermaking system closure. In this study a process simulation method was employed to analyze the accumulation phenomena of anionic starch in the process white water as the reuse rate of dry broke and pick up of surface sizing agent is increased. Steady state simulation studies were carried out based on the model developed in previous study. The variation of dissolved starch concentration in each process unit was monitored as a function of reuse rate of dry broke and surface sizing agent pick up rate. The result showed that dissolved starch concentration Increased as reuse rate of dry broke and surface sizing agent pick up rate was increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1004-1012
• /
• 2009

Although it is raising expectation of multimedia multicast services in various wireless networks, it requires an efficient IP multicast group membership management in wireless environment. However, the existing IGMPv3/MLDv2 protocols are too heavy; they are not suitable for wireless environment. Moreover they suffer from a number of problems, such as unreliable signaling, slow state transition, low spectral efficiency, bulk report, and interrupting dormant receivers. In this paper, we propose a wireless host agent (WHA)-based IP multicast group management scheme that requires a reduced number of signaling, which also solves such problems effectively. We develop an analytic model to quantify costs of bandwidth usage and signaling overhead, and perform comparison and analysis of the proposed scheme.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.863-870
• /
• 2002

The current class scheduling has difficulties in reflecting students' preferences for the classes that they want to take and forecasting the demands of classes. Also, it is usually a repetitive and tedious work to allocate classes to limited time and cesourres Although many research studios in task allocation and meeting scheduling intend to solve similar problems, they have limitations to be directly applied to the class-scheduling problem. In this paper. a class scheduling system using multi agents-based negotiation is suggested. This system consists of student agents, professor agents and negotiation agents each agent arts in accordance with its respective human user's preference and performs the repetitive and tedious process instead of the user The suggested system utilizes negotiation cost concept to derive coalition in the agent's negotiation. The negotiation cost is derived from users' bidding prices on classes, where each biding price represents a user's preference on a selected class. The experiments were performed to verify the negotiation model in the scheduling system. The result of the experiment showed that it could produce a feasible scheduling solution minimizing the negotiation cost and reflecting the users' performance. The performance of the experiments was evaluated by a class success ratio.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.10 no.3
• /
• pp.11-28
• /
• 2000

In these days it is rapidly increasing that multi-user, multi-layered commercial software developments for companies or public institutions. Security services are necessary for most of systems and the access control service is the essential of security services. Current access control methods that are used as access control policies are classified as Discretionary Access Control Mandatory Access Control and Role Based Access Control. However there are some inefficiencies when those methods are applied to current multi-user, multi-layered systems. Therefore it is required that a new access control method that takes complex system resources into account from the side of policy. In this paper extending previous Role Based of 'Behavior' and a basic model of the method. And we simply implement the method on the mobile agent based workflow management system that is a representative example of multi-user. multi-layered softwares and shows implementation results to tap possibilities of real-world application.