• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.21-23
• /
• 2002

We designed and manufactured helical magnetic flux compression generator, in which, the current density was reduced by increasing the number of wires by stages, and the voltage between wires was reduced by decreasing the time rate of inductance change. The figure of merit and the energy multiplication ratio of the generator were measured as a function of current density flowing through coil and their characteristics were analyzed. When the current density of coil was more than 250 kA/cm, the figure of merit and the energy multiplication ratio were decreased rapidly.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.385-395
• /
• 2011

An ejector was developed for man-portable missiles. The ejector can be separated from the missile after the completion of the ejection function even without any additional separation devices. This paper introduces the particular separation mechanism of the ejector and presents the methodology, based on a probabilistic design method, to predict the ejection-and-separation reliability. This approach using Monte Carlo simulation can also be applicable to the reliability prediction of one-shot items suffering from difficulties in estimating or in demonstrating their reliability due to the lack of the number of tests available.

• 한국컴퓨터정보학회논문지
• /
• 제22권10호
• /
• pp.27-34
• /
• 2017

In this paper, we propose a novel radiometric calibration method which can effectively compensate the nonlinearity of the detector for hyper-spectral camera. In general, the detector of hyper-spectral camera can produce nonlinear output depending on radiance and integral time. The conventional radiometric calibration methods extract the imprecise radiance profile from the spectral profile of the target due to this nonlinearity. In our proposed method, we use a quadratic equation instead of a linear equation to describe the relation between output of detector and radiance. Then, we use a fractional function to compensate variation of integration time. Thus, our proposed method can extract more precise spectral profile of radiance than conventional radiometric calibration method.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.114-119
• /
• 2011

This paper presents a magnetization modeling method combined with material sensitivity information to identify the unknown magnetization distribution of a hull and improve the accuracy of the predicted fields. First, based on the magnetization modeling, the hull surface was divided into three-dimensional sheet elements, where the individual remanent magnetization was assumed to be constant. For a fast search of the optimum magnetization distribution on the hull, a material sensitivity formula containing the first-order gradient information of an objective function was combined with the magnetization modeling method. The feature of the proposed method is that it can provide a stable and accurate field solution, even in the vicinity of the hull. Finally, the validity of the method was tested using a scale model ship.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.41-55
• /
• 2015

This study is proposed a new hybrid mount having a moving-magnet type electromagnetic actuator to reduce the vibration transmitted from naval shipboard equipment to the structure of the ship's hull. Optimal design specifications are determined through experimental analysis. The detailed design of the hybrid mount is determined through several design steps with electromagnetic numerical analysis using Maxwell Software(S/W). The hybrid mount that combines a rubber mount and an electromagnetic actuator has a fail-safe function for shock resistance. The mount is fabricated and tested using a universal testing machine to evaluate the design specifications. Finally, numerical simulation of the hybrid mount is performed to confirm control performance and applicability.

• 시스템엔지니어링학술지
• /
• 제1권2호
• /
• pp.34-42
• /
• 2005

Logistic Support Analysis(LSA) and Logistic Supportability Review must be carried out as soon as possible in development stage in order to minimize operation/maintenance cost that head the list of weapon cost and improve logistic supportability of the weapon system. And the result must be used for hardware designs to set up to be able to input to the system design and logistic support elements. Therefore Logistic Support Elements must be planed/developed/supplied with the main combat system concurrently and performance and logistic supportability of the comabat system had better be improved mutually. This report describes maintenance concept changes of weapon systems, fault diagnosis function and test equipment state on the domestic MBT(main battle tank). And then it presents application and intensification of itself fault diagnosis system for a domestic future MBT considering connection with IETM(Interactive Electronic Technical Manual) and TE(Test Equipment).

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권1호
• /
• pp.39-59
• /
• 2008

The performance of weapon system, based on the acceleration of advanced scientific technology, has been reinforced to the state of precision, complexion and multi-function. People have given great interest for a long time on its development, acquisition cost and enormous expense of operation/support. Under this environmental situation, this research paper proposes two kinds of implementation that can improve the RAM(Reliability, Availability, Maintainability) on weapon system. The first section is to understand all of the actual states on its reliability, in the acquisition process and to make the improvement for RAM at the milestones on the acquisition steps. The next section is to establish a defense RAM center, which will be closely cooperated with acquisition organization such as Ministry of Defense, DAPA(Defense Acquisition Program Administration), DTaQ(Defense agency for Technology and Quality) and ADD(Agency for Defense Development), etc. and to conclusively improve the RAM of weapon system in South Korea.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 추계학술발표대회
• /
• pp.1429-1432
• /
• 2012

소프트웨어 규모산정 활동은 기획, 구현, 운영 등 소프트웨어 수명주기 동안 수행되는 활동으로 프로젝트를 추진함에 있어 예산수립, 사업발주, 사업관리 등에 중요하다. 소프트웨어 규모산정으로 사용되는 기능점수를 측정할 때 개인의 주관적인 판단으로 인해 오차가 발생한다. 본 논문에서는 기능점수 측정의 오차를 줄이기 위해 4가지의 검증로직을 제시하고, 진행되는 실제 프로젝트를 통해 검증하여 제시된 검증로직이 타당함을 보인다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.398-401
• /
• 2001

Indium tin oxide films were deposited on unheated PET substrates by DC reactive magnetron sputtering of In-Sn (90-10 wt%) metallic alloy target. Electrical and optical properties of as-deposited films were systematically studied by control of the deposition parameters such as working pressure, DC power, and oxygen partial pressure. The figures of merit are important factors that summarize briefly the relationship between electrical and optical properties of transparent conducting films. The formulae of T/R$\sub$sh/ and T$\^$10//R$\sub$sh/ are expressed as a function of transmittance and sheet resistance. The best values of those figures of merit were approximately 38.6 and 8.95 (x10$\^$-3/Ω$\^$-1/), respectively.

• International Journal of Advanced Culture Technology
• /
• 제5권3호
• /
• pp.67-72
• /
• 2017

Transform variation technique is constituted the vibration status of the flash-gap recognition level (FGRL) on the distribution recognition function. The recognition level condition by the distribution recognition function system is associated with the scattering vibration system. As to search a position of the dot model, we are consisted of the distribution value with character point by the output signal. The concept of recognition level is composed the reference of flash-gap level for variation signal by the distribution vibration function. For displaying a variation of the FGRL of the maximum-average in terms of the vibration function, and distribution position vibration that was the a distribution value of the far variation of the $Dis-rf-FA-{\alpha}_{MAX-AVG}$ with $5.74{\pm}1.12$ units, that was the a distribution value of the convenient variation of the $Dis-rf-CO-{\alpha}_{MAX-AVG}$ with $1.64{\pm}0.16$ units, that was the a distribution value of the flank variation of the $Dis-rf-FL-{\alpha}_{MAX-AVG}$ with $0.74{\pm}0.24$ units, that was the a distribution value of the vicinage variation of the $Dis-rf-VI-{\alpha}_{MAX-AVG}$ with $0.12{\pm}0.01$ units. The scattering vibration will be to evaluate at the ability of the vibration function with character point by the distribution recognition level on the FGRL that is showed the flash-gap function by the recognition level system. Scattering recognition system will be possible to control of a function by the special signal and to use a distribution data of scattering vibration level.