• Textile Coloration and Finishing
• /
• v.14 no.1
• /
• pp.51-57
• /
• 2002

In the prior study, the mechanical properties and the dyeability of the easily dyeable polyester grim(EDY) were investigated. In this study, to interpret the dyeing behavior of EDY with C. I. Disperse Violet 1, the thermodynamic parameters of dyeing, such as the standard affinity, the heat of dyeing(the enthalpy change), the entropy change, the diffusion coefficient, and the activation energy of diffusion, were obtained from adsorption isotherms and dyeing rate at various temperatures and compared to these of regular polyester (REG-PET). The heat of dyeing(the enthalpy change) and the entropy change for EDY showed smaller negative values than those for REG-PET. This means that the dye molecules in the EDY are combined more loosely than in the REG-PET and that is due to the flexibility of polymer chains of EDY. The diffusion coefficients of C. I. Disperse Violet 1 into the EDY were larger than those for REG-PET, and the activation energy of diffusion on EDY was smaller than that on REG-PET.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.8
• /
• pp.1118-1126
• /
• 2012

Four putative GH12 genes were found in the Fusarium graminearum genome. The corresponding proteins were expressed in Escherichia coli, purified, and evaluated. FGSG_05851 and FGSG_11037 displayed high activities towards xyloglucan ($V_{max}$ of 4 and $11{\mu}mol/min$, respectively), whereas FGSG_07892 and FGSG_16349 were much less active with this substrate (0.081 and $0.004{\mu}mol/min$, respectively). However, all four of these enzymes had a similar binding affinity for xyloglucan. Xyloglucan was the substrate preferred by FGSG_05851, in contrast to the three other enzymes, which preferred ${\beta}$-glucan or lichenan. Therefore, FGSG_05851 is a xyloglucan-specific glucanase (E.C. 3.2.1.151) rather than an endoglucanase (E.C. 3.2.1.4) with broad substrate specificity. FGSG_11037 displayed a peculiar behavior in that the xyloglucan binding was highly cooperative, with a Hill coefficient of 2.5. Finally, FGSG_05851 essentially degraded xyloglucan into hepta-, octa-, and nonasaccharides, whereas the three other enzymes yielded hepta- and octa-saccharides as well as larger molecules.

• Journal of Korean Society of Rural Planning
• /
• v.5 no.2 s.10
• /
• pp.56-65
• /
• 1999

Recently, new concept and paradigm of 'Environmentally-Friendliness' is taking a growing interest in environmental planning and design. This study is to establish the evaluation model for environmentally-friendliness of 'Tourism Farms' in rural areas by LISREL structural equation model. A questionnaire survey was conducted for deputy manager group and expert group. As the Result of LISREL structural equation model, the environmentally-friendliness of tourism farms is composed of three categories. First, conservation of global environment (Low Impact), second, friendliness to surrounding nature(High Contact), and third, environmental health and amenities (Health & Amenity). Five indicators, such as (1)saving of energy and water resource, (2)reduction and reuse of garbage, (3)natural purification of sewage disposal, (4)utilization of natural energy, (5)campaign and education programs of environmentally-friendliness, were affecting the first category, i.e., conservation of global environment(Low Impact). Friendliness to surrounding nature (High Contact) is affected by 3 indicators, (1)contact to nature and diverse green areas, (2)water intimate & contact areas, (3)natural ecology observation by biotope. Finally, the dimension of environmental health and amenity is affected by 3 indicators, (1)nature affinity by farming experience, (2)environmental-friendliness of soil & crops by organic farming, (3) campaign and education programs of environmentally-friendliness. Total coefficient of determination of the structural equation model by LISREL was 0.897, which showed high explanatory power.

• Ocean and Polar Research
• /
• v.31 no.3
• /
• pp.247-255
• /
• 2009

We measured phosphate benthic fluxes and conducted phosphate adsorption experiments in order to find out the effects of adsorption on phosphate benthic fluxes in the intertidal sediments of Keunso Bay during summer and winter. Organic carbon contents showed little variation with season at St. S1, but noticeable changes were observed at St. S2, which were three times higher in winter than in summer. The higher organic carbon contents in winter resulted from the bloom of benthic algae in surface sediments. Pore water phosphate concentrations were much higher in summer than in winter. The higher phosphate concentration in summer was probably due to the faster remineralization rate of organic matter in summer. At St. S1, benthic fluxes of phosphate showed a negative value in summer and a positive value in winter. However, St. S2 had a negative benthic flux both in summer and winter. The negative benthic flux was ascribed to the phosphate adsorption on iron oxides in surface sediments. The equilibrium concentrations of phosphate obtained from the adsorption experiment were three times higher at St. S1 than at St. S2. The relatively high adsorption coefficient and low equilibrium concentration indicated that phosphate was strongly adsorbed on the surface sediments of Keunso Bay. The strong adsorption affinity significantly reduced benthic fluxes of phosphate in the intertidal sediments.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.829-834
• /
• 2004

Annealing of $Cu(B)/Ti/SiO_2$ in vacuum has been carried out to investigate the effects of Ti underlayer on microstructure in $Cu(B)/Ti/SiO_2$ structures. For comparison, $Cu(B)/Ti/SiO_2$ structures was also annealed in vacuum. Three different temperature dependence of Cu growth can be seen in $Cu(B)/Ti/SiO_2$; B precipitates- pinned grain growth, abnormal grain growth, normal grain growth. The Ti underlayer having a strong affinity for B atoms reacts with the out-diffused B to the Ti surface and forms titanium boride at the Cu-Ti interface. The formation of titanium boride acts as a sink for the out-diffusion of B atoms. The depletion of boron in grain boundaries of Cu films, as results of the rapid diffusion of B along the grain boundaries and the insufficient segregation of B to the grain boundaries, induces grain boundaries to migrate and causes the abnormal grain growth. The increased bulk diffusion coefficient of B within Cu grains can be responsible for the normal grain growth occurring in the annealed $Cu(B)/Ti/SiO_2\;at\;600^{\circ}C$. In contrast, the $Cu/SiO_2$ structures show only the abnormal growth of grains and their sizes increasing as the temperature increases above $400^{\circ}C$.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.378-383
• /
• 2014

This study predicts the of the hysteretic friction of a rubber block sliding on an SMA asphalt road. The friction of filled rubber on a rough surface is primarily determined by two elements:the viscoelasticity of the rubber and the multi-scale perspective asperities of the road. The surface asperities of the substrate exert osillating forces on the rubber surface leading to energy dissipation via the internal friction of the rubber when rubber slides on a hard and rough substrate. This study defines the power spectra at different length scales by using a high-resolution surface profilometer, and uses rubber and road surface samples to conduct friction tests. I consider in detail the case when the substrate surface has a self affine fractal structure. The theory developed by Persson is applied to describe these tests through comparison with the hysteretic friction coefficient relevant to the energy dissipation of the viscoelastic rubber attributable to cyclic deformation. The results showed differences in the absolute values of predicted and measured friction, but with high correlation between these values. Hence, the friction prediction model is an appropriate tool for separating the effects of each factor. Therefore, this model will contribute to clearer understanding of the fundamental principles of rubber friction.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.9
• /
• pp.719-724
• /
• 1994

Major cellulase components, such as three endoglucanases (endoglucanases I, II, and III) and one exoglucanase (exoglucanase II), were isolated from a commercial cellulase (Meicelase TP 60) derived from the fungus Trichoderma viride by a series of chromatography procedures. These procedures were the gel filtration on Bio-Gel, the anion exchange on DEAE-Bio-Gel A, the cation exchange on SP-Sephadex C50, and the affinity chromatography on Avicel cellulose. The average molecular weights determined by SDS-polyacrylamide gel electrophoretic analysis were 51,000, 59,000, 41,000 and 62,000 Da for endoglucanases I, II and III and exoglucanase II, respectively. The extinction coefficients, ${\varepsilon}^{1%}$ 280 nm, of these enzymes were 11.7, 3.3, 7.2 and 11.3, respectively. Among them, the endoglucanase II showed the very low value of the coefficient compared with the others. On the other hand, it was found that endoglucanase II and III were of more random hydrolytic mode on carboxymethylcellulose as compared with those of endoglucanase I and exoglucanase II. Especially, endoglucanase I showed less random action than that of exoglucanase II. In the hydrolysis of insoluble cellulose by the enzyme components, cellobiose was the major product, but glucose was the major product by endoglucanase III.

• Reproductive and Developmental Biology
• /
• v.32 no.3
• /
• pp.141-146
• /
• 2008

To search a new porcine pheromonal odorant, the models of four type (2D-QSAR, HQSAR, CoMFA & CoMSlA) were derived from quantitative structure-activity relationship (QSAR) between tetrahydrofuran-2-yl family compounds and their observed binding affinity constants (Obs.p$[Od]_{50}$). The optimized CoMFA model (predictability; $r^{2}_{cv.}(q^2)$=0.886 & correlation coefficient: $r^{2}_{ncv.}$=0.984) from ligand based approaches was confirmed as the best model among them. The $N^{1}$-allyl-$N^{2}$-(tetrahydrofuran-2-yl)methyl)oxalamide (P1), 2-(4-trimethylammoniummethylcyclohexyloxy)tetrahydrofurane (P5) and 2-(3-trimethylammoniummethylcyclohexyloxy)tetrahydrofurane (P6) molecules predicted as porcine pheromonal odorant by the CoMFA model were showed relatively high binding affinity constant values (Pred.p$[Od]_{50}=8{\sim}10$) and very lower toxicity values against some sorts of toxicity.

• Korean Journal of Plant Resources
• /
• v.25 no.6
• /
• pp.719-730
• /
• 2012

This study was conducted to investigate the environmental characteristics of natural habitats, and the genetic variations in samples from 19 different quadrates of Asplenium scolopendrium 10 habitats. The natural habitats of A. scolopendrium were located at an altitudes 110-973 m with inclinations of $7-30^{\circ}$. All the quadrates were located on north facing slopes. The average field capacity of the soil is 31.4%, with organic matter at 16.7%, and the pH is 5.84. The soil texture was confirmed as sandy loam in 8 habitats and silt loam in 2 habitats. A total of 214 vascular plants were identified from 10 habitats. The importance value of the herbaceous layer (H) was the highest in A. scolopendrium, at 10.4%, followed by Arachniodes standishii (7.3%), Dryopteris crassirhizoma (6.5%), and Polystichum tripteron (5.3%), which implies that the natural habitats of A. scolopendrium are affinity with ferns. The species diversity of A. scolopendrium was estimated as on average 1.09, while the dominance and evenness were 0.12 and 0.87, respectively. The result of the RAPD analysis, among 59 bands amplified with a primer, 25 (42.4%) showed polymorphism. Twenty-one individuals of 10 habitats could be classified into four groups with similarity coefficient values ranging from 0.74 to 1.0. Mt. Mullae and Geumdaebong populations shows basal branching within the 21 individuals. Ulleung-do island and Jeju-do island population forms an independent clade, respectively. Mt. Moak and Byeonsan-bando clade formed a sister to the Ulleung-do island and Jeju-do island clade.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.9 s.100
• /
• pp.949-956
• /
• 2005

In this paper, a new CPW-fed cross shape fractal antenna having a self-affinity is presented. This novel configuration, which has anisotropic scaling symmetry, makes smaller profile characteristic compared to the fractal antenna using a self-similarity. Increase of the iteration coefficient, which leads to decrease of the fundamental resonant frequency, shows a good impedance matching condition and multi-band characteristics due to new surface current paths. The radiation patterns are similar to those of monopole antennas. In the K3 stage of iteration, the proposed antenna shows a measured maximum gain 2.27 dBi at 940 MHz. A commercially available software based on the FDTD algorithm has been used to obtain the predicted results. In addition, an RT/Duroid 5880 substrate has been employed for the experimental results.