• Analytical Science and Technology
• /
• v.15 no.5
• /
• pp.439-444
• /
• 2002

DE-O-V ICP-AES has been studied for the analytical characteristics of As, Se, and Ge with PN, USN and HG. Effect of $NaBH_4$ and HCl on the signal intensity of As, Se and Ge with HG and E-O-V ICP-AES were closely investigated. The sensitivities of As, Se and Ge with HG were much greater than those with PN and USN. Accordingly, the detection limits of the elements with HG were lower by a factor of 100 and 10 than PN and USN, respectively.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.167-173
• /
• 1998

An electrothermal vaporization-hollow cathode glow discharge-atomic emission spectrometer(ETV-HCGD-AES) has been developed for detecting heavy metals in human serum and urine samples. Fisrt of all, we designed a glow discharge cell for atomic emission spectrometry and its analytical performance was studied with the standard reference materials(SRMs) purchased from the NIST. Practically, the ETV-HCGD-AES demonstrated better instrumental sensitivity and selectivity for detecting Hg and Pb in the SRMs, serum and urine, than ICP-OES since the ETV-HCGD-AES was not required the complicate sample digestion procedure, which improved sample transportation efficiency.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.225-234
• /
• 2006

In this paper, we design a combined security processor, ECC, MD-5, and AES, as a SIP for cryptography of securing contents. Each SIP is modeled and designed in VHDL and implemented as a reusable macro through logic synthesis, simulation and FPGA verification. To communicate with an ARM9 core, we design a BFM(Bus Functional Model) according to AMBA AHB specification. The combined security SIP for a platform-based SoC is implemented by integrating ECC, AES and MD-5 using the design kit including the ARM9 RISC core, one million-gate FPGA. Finally, it is fabricated into a MPW chip using Magna chip $0.25{\mu}m(4.7mm{\times}4.7mm$) CMOS technology.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.27-30
• /
• 2007

Recently, use of light-weight panel is increasing in building. Styrofoam sandwich panel is inexpensive and it is excellent in insulation ability and constructability. But styrofoam of panel inside is low ignition point. Consequently, when panel is fired, it is occur in poisonous gas. On the other hand, light-weight foamed concrete is excellent in insulation ability, fire resistance due to inner pore. Properties of light-weight concrete is influenced by foaming agent type. Accordingly, this study investigate in insulation property of according to foaming agent type in order to using light-weight foamed concrete instead of styrofoam. As a results, Non-heating zone temperature of light-weight foamed concrete of using AP, FP are lower than light-weight foamed concrete of using AES. Light-weight foamed concrete of using AES, FP are satisfied with fire performance of two hours at foam ratio 50, 100. Light-weight foamed concrete of using AP is satisfied with fire performance of two hours at AP ratio 0.1, 0.15. Insulation property is better closed pore by made AP, FP than open pore by made AES.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.93-97
• /
• 2010

We have studied the effect of the chemical composition of the ZnO nanorod surface on the optical characteristics. The surface was treated with H- and O-plasma at different surface temperatures. The chemical composition of the surface of the ZnO nanorod, being investigated by Auger Electron Spectroscopy(AES), was related to the Photoluminescence(PL) data reported in our previous results. The AES showed the opposite results for the $H_2$ and $O_2$ plasma treatments. The ratio of Zn to O on the surface of the ZnO nanorod increased in the case of $H_2$ plasma, while the composition rate of O increased after $O_2$ plasma treatment. The AES results seems to be correlated to the shift in PL peaks. The increase in the composition rate of Zn on the surface of ZnO nanorod is considered to cause the blue shift of the UV peak. On the contrary, the relative increase of O is considered to cause the red shift in PL peaks.

• Analytical Science and Technology
• /
• v.15 no.6
• /
• pp.521-528
• /
• 2002

Neutron Activation Analysis (NAA) and Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) have been applied for the determination of inorganic elements in mud flat of south seaside in Korea. The analytical results of Al, Ca, Fe, Mg, K and Na by NAA were compared with those by ICP-AES. The results show that NAA is superior to ICP-AES for the determination of minor elements in sediment. Accordingly, NAA will play an important role in the analysis of environment samples such as mud flat and sediment having complex matrix.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.267-270
• /
• 2014

As Smart Device research processes, the needs of information security in light devices is increasing. For example, Zigbee provide Information Security by applying $AES-CCM^*$ defined IEEE 802.15.4 standard. However, according to information security law in Korea, only devices with KCMVP certification can be used in government organization and facilities. Therefore, this paper provide a solution to apply ARIA-CCM and ARIA-GCM for KCMVP in reserved field of IEEE 802.15.4 standard. For analyzing performance, we provide the speed test result of ARIA-CCM and ARIA-GCM comparing with $AES-CCM^*$.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.2
• /
• pp.53-64
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm, "Rijndael". An iterative looping architecture using a single round block is adopted to minimize the hardware required. To achieve high throughput rate, a sub-pipeline stage is added by dividing the round function into two blocks, resulting that the second half of current round function and the first half of next round function are being simultaneously operated. The round block is implemented using 32-bit data path, so each sub-pipeline stage is executed for four clock cycles. The S-box, which is the dominant element of the round block in terms of required hardware resources, is designed using arithmetic circuit computing multiplicative inverse in GF($2^8$) rather than look-up table method, so that encryption and decryption can share the S-boxes. The round keys are generated by on-the-fly key scheduler. The crypto-processor designed in Verilog-HDL and synthesized using 0.25-$\mu\textrm{m}$ CMOS cell library consists of about 23,000 gates. Simulation results show that the critical path delay is about 8-ns and it can operate up to 120-MHz clock Sequency at 2.5-V supply. The designed core was verified using Xilinx FPGA board and test system.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.6
• /
• pp.1237-1246
• /
• 2021

This paper is about Asynchronous Transfer Mode (ATM) cell security in which an Output Feedback (OFB) mode is applied to an AES block ciphers. ATM cells are divided into user data cells and maintenance cells, and each cell is 53 octets in size and consists of a header of 5 octets and a payload of 48 octets. In order to encrypt/decrypt ATM cells, the boundaries of cells must be detected, which is possible using the Header Error Control (HEC) field in the header. After detecting the boundary of the cell, the type of payload is detected using a payload type (PT) code to encrypt only the user cell. In this paper, a security method for ATM cells that satisfies the requirements of ISO 9160 is presented.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.339-345
• /
• 2009

The graft copolymerization of acrylonitrile-EPDM-styrene (AES) was investigated under various reaction conditions such as the concentration of initiator, the content of diene and viscosity of EPDM, and the concentration of solvents. The conversion increased but the molecular weight and the rubber particle size decreased with the concentration of initiator. The graft ratio(GR) increased at low concentrations of the initiator but, after the maximum value, it gradually decreased with the concentration of initiator. Toluene as a single solvent gave the highest conversion and the mixture of ethyl benzene and toluene was better than toluene. The rubber particle size increased with the viscosity of EPDM and the graft ratio and the number of rubber particles with occluded SANs increased with the content of diene.