구리 흡착 실험과 MINTEQA2 및 FITEQL3.2 컴퓨터 프로그램을 이용하여 고성군 판곡리에서 산출되는 황토 현탁액의 구리 흡착 특성을 연구하였다 구리 흡착 실험은 pH, 구리 용액의 양, 전해질의 이온 세기를 변화시키면서 실시하였고, 구리의 농도는 유도결합플라즈마분광분석기를 사용하여 분석하였다. 첨가하는 구리 이온의 양과 pH가 증가할수록 흡착되는 구리 이온의 양도 증가한다. 특히 pH가 5.5에서 6.5로 변할 경우 급격한 흡착률의 증가가 있으며, pH 7.5에서 거의 100% 흡착된다. 배경 전해질의 이온 세기에 영향을 받지 않는 것으로 보아 구리 이온은 황토 표면과 내부권 복합체(inner-sphere complex)로써 아주 강한 화학적 결합을 하고 있는 것으로 판단할 수 있다. MINTEQA2 프로그램을 이용하여 구리의 화학종 분포를 계산한 결과, pH가 증가함에 따라 $Cu^{2+}$ 의 농도는 점점 감소하고 $Cu(OH)_2$ 농도는 점점 증가한다. FITEQL3.2 프로그램을 이용하여 황토의 표면을 규산염 광물 자리와 산화염 광물 자리로 나눈 two sites-three pKas 모델을 적용하여 흡착 양상을 모델링한 결과, 구리 용액의 부피가 2~6 mL인 경우 구리 흡착 평형 상수 값을 도출할 수 있었다. 철산화염 광물 반응 자리에 흡착되는 구리의 앙은 pH 4.5~6.5 범위에서 급격한 흡착 양상을 보이다가 그 이상 pH에서는 흡착되는 양이 조금씩 밖에 증가하지 않는다. 규산염 광물 반응 자리에 흡착되는 구리의 양은 구리 용액의 양이 적을 때는 미약하다가 구리 용액의 양이 커질 경우 그 양이 많아진다. 침전에 의하여 제거되는 구리의 양은 광물 표면 자리에 흡착되는 양과 비교하면 아주 적다. 구리 이온에 대한 흡착 친화도는 규산염 광물보다는 철산화염 광물이 더 큰 것으로 판단된다.
Single-Si 기판과 poly-Si 기판에 각각 Ti을 sputter한 후 RTA 처리하여 안정한 TiS$i_2$를 형성하였다. 그 위에 Si이 1% 첨가된 Al-1% Si을 600nm sputter한 후 후속 열처리로서 400-60$0^{\circ}C$ 에서 30분간 $N_2$분위기로 furnace어닐링을 실시하였다. 이렇게 준비된 각 시편에 대하여 면저항 측정, Auger분석, SEM 사진으로 Al-1% Si/TiS$i_2$이중층 구조에서 Ti-silicide의 열적 안정성을 살펴 보았고, EDS 분석과 X-ray 회절 peak 분석을 통하여 Al-1% Si 층과 TiS$i_2$층의 반응으로 생긴 석출물의 성분과 상을 조사하였다. 이로 부터 다음과 같은 결과를 얻었다 Single-Si 기관에서 형성한 TiS$i_2$층은 Al-1% Si 층과 55$0^{\circ}C$에서 완전히 반응하여 석출물을 형성하였고, poly-Si 기판에서 형성한 TiS$i_2$층은 Al-1% Si 층과 50$0^{\circ}C$에서 완전히 반응하여 석출물을 형성하였는데 전반적으로 기판이 poly-Si인 경우가 반응이 더 잘 일어났고, 석출물의 크기도 비교적 컸다. 이는 poly-Si에 존재하는 grain boundary로 인해 poly-Si에서 형성된 Ti-silicide 층이single-Si 기관에서 형성된 Ti-silicide 층보다 불안정하기 때문으로 생각된다. EDS 분석에 의하여 석출물은 Ti, Al, 그리고 Si로 이루어진 3상 화합물이라고 추정되었고, X-ray회절 분석에 의해 석출물은 Ti, Al, 그리고 Si간의 3상 화합물인 T$i_7$A$l_5$S$i_12$로 확인되었다.
본 실험은 인공배지가 담긴 용기에서 재배되는 6가지 분식물의 지상부와 지하부에 흡수된 규소의 양과 각 양액에 첨가된 규소의 농도에 따른 흡수 경향을 구명하고자 수행되었다. 화훼농가에서 주로 재배되고 있는 분식물 중에서 국화, 스파티필럼, 칼랑코에, 아이비, 카네이션, 그리고 포인세티아를 선정하고 균일한 묘를 선별하여 350mL 마젠타 박스에서 재배하면서 $K_2SiO_3$를 이용하여 Si를 0, 2.7 또는 5.4mM 농도로 첨가하였다. 각 마젠타 박스에 에어펌프에 1m 길이의 polyethylene 튜브를 연결하여 전체 실험기간 동안 $2L{\cdot}h^{-1}$(노즐당 $143mL{\cdot}h^{-1}$)로 양액에 통기하면서 재배하였다. 양액의 EC는 $1.5mS{\cdot}cm^{-1}$로, pH는 5.6으로 실험 시작 전에 조정하였다. 모든 환경 조건이 동일한 조건에서 재배한 작물을 15일째에 수확하여 지하부와 지상부의 규소 함량을 몰리브덴청법을 이용하여 측정하였다. 이를 바탕으로 규소 흡수 정도와 농도에 따른 규소 함량 변화를 알아보기 위해 단순회귀분석을 통해 검정하였으며, 양액 내에 남아 있는 규소 함량은 ICP-AES을 이용하여 측정하였다. 6가지 분식물 중 지하부의 규소 함량은 카네이션에서 가장 높고 포인세티아에서 가장 낮았다. 그리고 지상부의 규소 함량은 카네이션에서 가장 높았고 칼랑코에에서 가장 낮았다. 지상부와 지하부를 합친 식물체의 총규소 함량은 포인세티아, 칼랑코에 및 국화 는 규소 흡수 정도가 낮았고, 스파티필름은 중간 그리고 아이비와 카네이션은 높게 나타났다. 본 연구의 결과에서 규소 흡수 정도는 식물마다 달랐고 회귀분석이 식물에 따라 다양하게 나타났다.
Urban groundwater has a unique hydrologic system because of the complex surface and subsurface infrastructures such as deep foundation of many high buildings, subway systems, and sewers and public water supply systems. It generally has been considered that increased surface impermeability reduces the amount of groundwater recharge. On the other hand, leaks from sewers and public water supply systems may generate the large amounts of recharges. All of these urban facilities also may change the groundwater quality by the recharge of a myriad of contaminants. This study was performed to determine the factors controlling the recharge of deep groundwater in an urban area, based on the hydrogeochemical characteristics. The term ‘contamination’ in this study means any kind of inflow of shallow groundwater regardless of clean or contaminated. For this study, urban groundwater samples were collected from a total of 310 preexisting wells with the depth over 100 m. Random sampling method was used to select the wells for this study. Major cations together with Si, Al, Fe, Pb, Hg and Mn were analyzed by ICP-AES, and Cl, N $O_3$, N $H_4$, F, Br, S $O_4$and P $O_4$ were analyzed by IC. There are two groups of groundwater, based on hydrochemical characteristics. The first group is distributed broadly from Ca-HC $O_3$ type to Ca-C1+N $O_3$ type; the other group is the Na+K-HC $O_3$ type. The latter group is considered to represent the baseline quality of deep groundwater in the study area. Using the major ions data for the Na+K-HC $O_3$ type water, we evaluated the extent of groundwater contamination, assuming that if subtract the baseline composition from acquired data for a specific water, the remaining concentrations may indicate the degree of contamination. The remainder of each solute for each sample was simply averaged. The results showed that both Ca and HC $O_3$ represent the typical solutes which are quite enriched in urban groundwater. In particular, the P$CO_2$ values calculated using PHREEQC (version 2.8) showed a correlation with the concentrations of maior inorganic components (Na, Mg, Ca, N $O_3$, S $O_4$, etc.). The p$CO_2$ values for the first group waters widely ranged between about 10$^{-3.0}$ atm to 10$^{-1.0}$ atm and differed from those of the background water samples belonging to the Na+K-HC $O_3$ type (<10$^{-3.5}$ atm). Considering that the p$CO_2$ of soil water (near 10$^{-1.5}$ atm), this indicates that inflow of shallow water is very significant in deep groundwaters in the study area. Furthermore, the P$CO_2$ values can be used as an effective parameter to estimate the relative recharge of shallow water and thus the contamination susceptibility. The results of our present study suggest that down to considerable depth, urban groundwater in crystalline aquifer may be considerably affected by the recharge of shallow water (and pollutants) from an adjacent area. We also suggest that for such evaluation, careful examination of systematically collected hydrochemical data is requisite as an effective tool, in addition to hydrologic and hydrogeologic interpretation.ion.ion.
제주 연안에 서식하는 해양 녹조류와 갈조류의 항고혈압 활성을 알아보기 위해 해조류로부터 메탄올과 물을 이용하여 상온($20^{\circ}C$)과 $70^{\circ}C$에서 각각 4가지 종류의 추출물을 제조하여 스크리닝하였다. 결과, 녹조류에서는 비교적 낮은 ACE 저해활성을 보였으나, 갈조류에서는 70ME 잇바디괭생이모자반, 말미역, 바위주름, 넓패, 톳, 다시마 및 70AE 감태에서 ACE 저해활성이 높게 나타났다. 또한 70AE 감태의 가수분해물은 $2.33{\sim}3.56{\mu}g/mL$의 $IC_{50}$값을 보여 매우 높은 ACE 저해활성을 확인할 수 있었다. 이는 해조류의 ACE 저해활성이 수용성 추출물뿐만 아니라 메탄올 추출물에서도 나타나는 것은 해조류 유래 fucoxanthin, phlorotannin 및 polyphenol계 화합물 등에 의한 영향도 있을 것으로 사료된다.
본 연구에서는 azoxymethane (AOM)과 dextran sodium sulfate (DSS)로 유도된 대장 발암과정에 대한 셀레늄의 방어 효과를 조사하였다. 셀레늄 결핍(0.02 ppm Se), 정상(0.1 ppm Se), 과다(0.5 ppm Se)사료를 12주간 식이로 급여하여 혈액검사와 대장암 발생의 초기단계인 aberrant crypt foci (ACF)수를 측정했으며, 암 발생율을 조사하였다. ICP-AES를 사용하여 간의 셀레늄 농도를 측정하였으며, 또한 셀레늄포함 항산화효소인 glutathione peroxidase (GPx) 활성을 알아보았다. 또한 TUNEL assay와 PCNA, $\beta$-catenin에 대한 면역조직 염색을 수행하였다. ACF 수 및 종양 발생률에 있어서, 셀레늄과다사료를 급여한 군이 정상셀레늄사료를 급여한 군보다 낮았으며, 셀레늄결핍사료를 급여한 군은 오히려 ACF 수 및 종양 발생률이 높았다. GPx 활성은 셀레늄의 섭취가 과다한 군에서 높게 나타났으며, 이 때, TUNEL에서 apoptotic positive cell이 증가하는 것을 확인했다. 또한 셀레늄의 섭취가 과다한 군에서 PCNA와 $\beta$-catenin의 발현이 감소됨을 볼 수 있었다. 본 마우스 모델실험에서 셀레늄은 여러 기전에 의해 대장암 발생을 억제할 수 있을 것으로 사료된다.
The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.
Kim, Soo-Hyun;Yim, Sung-Soo;Lee, Do-Joong;Kim, Ki-Su;Kim, Hyun-Mi;Kim, Ki-Bum;Sohn, Hyun-Chul
한국전기전자재료학회:학술대회논문집
/
한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
/
pp.239-240
/
2008
As semiconductor devices are scaled down for better performance and more functionality, the Cu-based interconnects suffer from the increase of the resistivity of the Cu wires. The resistivity increase, which is attributed to the electron scattering from grain boundaries and interfaces, needs to be addressed in order to further scale down semiconductor devices [1]. The increase in the resistivity of the interconnect can be alleviated by increasing the grain size of electroplating (EP)-Cu or by modifying the Cu surface [1]. Another possible solution is to maximize the portion of the EP-Cu volume in the vias or damascene structures with the conformal diffusion barrier and seed layer by optimizing their deposition processes during Cu interconnect fabrication, which are currently ionized physical vapor deposition (IPVD)-based Ta/TaN bilayer and IPVD-Cu, respectively. The use of in-situ etching, during IPVD of the barrier or the seed layer, has been effective in enlarging the trench volume where the Cu is filled, resulting in improved reliability and performance of the Cu-based interconnect. However, the application of IPVD technology is expected to be limited eventually because of poor sidewall step coverage and the narrow top part of the damascene structures. Recently, Ru has been suggested as a diffusion barrier that is compatible with the direct plating of Cu [2-3]. A single-layer diffusion barrier for the direct plating of Cu is desirable to optimize the resistance of the Cu interconnects because it eliminates the Cu-seed layer. However, previous studies have shown that the Ru by itself is not a suitable diffusion barrier for Cu metallization [4-6]. Thus, the diffusion barrier performance of the Ru film should be improved in order for it to be successfully incorporated as a seed layer/barrier layer for the direct plating of Cu. The improvement of its barrier performance, by modifying the Ru microstructure from columnar to amorphous (by incorporating the N into Ru during PVD), has been previously reported [7]. Another approach for improving the barrier performance of the Ru film is to use Ru as a just seed layer and combine it with superior materials to function as a diffusion barrier against the Cu. A RulTaN bilayer prepared by PVD has recently been suggested as a seed layer/diffusion barrier for Cu. This bilayer was stable between the Cu and Si after annealing at $700^{\circ}C$ for I min [8]. Although these reports dealt with the possible applications of Ru for Cu metallization, cases where the Ru film was prepared by atomic layer deposition (ALD) have not been identified. These are important because of ALD's excellent conformality. In this study, a bilayer diffusion barrier of Ru/TaCN prepared by ALD was investigated. As the addition of the third element into the transition metal nitride disrupts the crystal lattice and leads to the formation of a stable ternary amorphous material, as indicated by Nicolet [9], ALD-TaCN is expected to improve the diffusion barrier performance of the ALD-Ru against Cu. Ru was deposited by a sequential supply of bis(ethylcyclopentadienyl)ruthenium [Ru$(EtCp)_2$] and $NH_3$plasma and TaCN by a sequential supply of $(NEt_2)_3Ta=Nbu^t$ (tert-butylimido-trisdiethylamido-tantalum, TBTDET) and $H_2$ plasma. Sheet resistance measurements, X-ray diffractometry (XRD), and Auger electron spectroscopy (AES) analysis showed that the bilayer diffusion barriers of ALD-Ru (12 nm)/ALD-TaCN (2 nm) and ALD-Ru (4nm)/ALD-TaCN (2 nm) prevented the Cu diffusion up to annealing temperatures of 600 and $550^{\circ}C$ for 30 min, respectively. This is found to be due to the excellent diffusion barrier performance of the ALD-TaCN film against the Cu, due to it having an amorphous structure. A 5-nm-thick ALD-TaCN film was even stable up to annealing at $650^{\circ}C$ between Cu and Si. Transmission electron microscopy (TEM) investigation combined with energy dispersive spectroscopy (EDS) analysis revealed that the ALD-Ru/ALD-TaCN diffusion barrier failed by the Cu diffusion through the bilayer into the Si substrate. This is due to the ALD-TaCN interlayer preventing the interfacial reaction between the Ru and Si.
유도결합 플라즈마 질량분석법에 의한 암석 시료의 미량원소 정량분석을 위한 전처리 과정으로 통상 산분해법인 비이커-가열판 용해법이 사용된다. Zr과 Hf은 다른 비유동성 원소들과 함께 지구조 해석에 이용되는 중요한 원소이지만 암석 내에 이들을 농집시키는 불용성 광물이 있으면 비이커-가열판 용해법으로 완전히 용해되지 않는다. 이러한 불용성 광물을 용해시키기 위해 고압 테프론 용기법이나 알칼리 용융법을 이용하는데 전처리시간이 너무 오래 걸리거나 농도가 낮은 희토류원소 등의 분석 정확도가 감소하는 문제점이 있다. 이 연구에서는 자동 용융 기기를 사용하여 미국지질조사소의 암석 표준시료 3종(AGV-2, BHVO-2, G-3)을 저희석 유리구로 제작하고 이 유리구를 분말로 만들어 산분해를 거쳐 용해시킨 방법(유리구 용해법)으로 전처리한 후, 유도결합 플라즈마 질량분석기와 유도결합 플라즈마 원자방출분광기를 이용하여 희토류 원소를 포함한 30종의 미량원소 분석을 실시하였으며 시료에 대한 최종적인 희석비율은 1:2,000 이하로 유지하였다. 이 유리구 용해법에 의한 분석결과를 암석 분말시료를 이용한 비이커-가열판 용해법과 비교해 보았다. 대체적으로 Cr, Co, Ni, Cu, Zn, Pb 등의 원소분석 결과는 두 방법 모두 3종의 표준물질에서 추천치와 잘 부합되었으며 유리구 용해법을 이용한 분석에서 Pb, Zn 등 휘발성 원소의 손실은 나타나지 않았다. 저어콘을 많이 함유한 화강암 표준시료(G-3)의 Y, Zr, Hf과 중희토류원소에 대해서는 비이커-가열판 용해법의 경우 추천치에 비해 체계적으로 낮은 값을 보인 반면 유리구 용해법은 추천값에 잘 부합되는 결과를 얻었다. 이 연구의 유리구 용해법을 이용하면 불용성 원소를 포함한 미량원소 분석의 정확도가 크게 향상될 것으로 기대된다.
차세대 LSI용 유전체 박막으로서의 응용을 목적으로 RF 마그네트론 스퍼터링법으로 Si기판위에 SrTiO$_3$박막을 제조하였다. Ar과 $O_2$혼합가스 비, 바이어스 전압변화, 열처리 온도등의 증착조건을 다양하게 변화시키며 SrTiO$_3$박막을 제조하여 최적의 증착조건을 조사하였다. 박막의 결정성을 XRD로, 박막과 Si 사이의 계면의 조성분포를 AES로 각각 분석하였다. Ar과 $O_2$의 혼합가스를 스퍼터링 가스로 사용함으로써 결정성이 좋은 박막을 얻었다. 그리고 보다 치밀한 박막을 얻고자 바이어스 전압을 걸어주며 증착시켰다. 본 실험결과에서는 스퍼터링 가스는 Ar+20% $O_2$혼합가스, 바이어스 전압은 100V에서 좋은 결정성을 얻었다. 또한 하부전극으로 Pt, 완충층으로 Ti를 사용함으로써 SrTiO$_3$막과 Si 기판과의 계면에서 SiO$_2$층의 형성을 억제할 수 있었으며, Si의 확산을 막을 수 있었다. 전류 및 유전특성을 측정하기 위해 Au/SrTiO$_3$/Pt/Ti/SiO$_2$/Si로 구성된 다층구조의 시편을 제작하였다. Pt/Ti층은 RF 스퍼터링으로, Au 전극은 DC 마그네트론 스퍼터링법으로 증착시켰다 $600^{\circ}C$로 열처리함에 의해 미세하던 결정림들이 균일하게 성장하였으며, 이에 따라 유전율이 증가하고 누설전류가 감소하였다. $600^{\circ}C$에서 열처리한 두께 300nm의 막에서 유전율은 6.4fF/$\mu\textrm{m}$$^2$이고, 비유전상수는 217이었으며, 누설전류밀도는 2.0$\times$$10^{-8}$ A/$\textrm{cm}^2$로 양질의 SrTiO$_3$박막을 제조하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.