• International Journal of Aeronautical and Space Sciences
• /
• 제11권4호
• /
• pp.285-302
• /
• 2010

Active aeroelastic control is an emerging technology aimed at providing solutions to structural systems that under the action of aerodynamic loads are prone to instability and catastrophic failures, and to oscillations that can yield structural failure by fatigue. The purpose of the aeroelastic control among others is to alleviate and even suppress the vibrations appearing in the flight vehicle subcritical flight regimes, to expand its flight envelope by increasing the flutter speed, and to enhance the post-flutter behavior usually characterized by the presence of limit cycle oscillations. Recently adaptive and robust control strategies have demonstrated their superiority to classical feedback strategies. This review paper discusses the latest development on the topic by the authors. First, the available control techniques with focus on adaptive control schemes are reviewed, then the attention is focused on the advanced single-input and multi-input multi-output adaptive feedback control strategies developed for lifting surfaces operating at subsonic and supersonic flight speeds. A number of concepts involving various adaptive control methodologies, as well as results obtained with such controls are presented. Emphasis is placed on theoretical and numerical results obtained with the various control strategies.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.189-192
• /
• 2014

Recently, development of electric powered UAV for high altitude and long endurance mission has been conducted worldwide. Long endurance requirement necessitates high lift over drag (L/D) aerodynamic characteristics and lightweight structures, leading to highly flexible wings with high aspect ratio. These highly flexible wings increase the danger of catastrophic aircraft failure due to flutter, which is a dynamic aeroelastic instability occurring from the interaction of aerodynamic, inertial, and elastic forces acting on the aircraft flying through the air. In this paper, flexible wing for electric powered UAV whose skin is fabricated using mylar film for lightweight design is briefly explained. In addition, flutter analysis procedures and results for the flexible wing in order to substantiate the aeroelastic stability requirements are presented.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.235-242
• /
• 2003

This paper deals with numerical analysis of static and dynamic wind effects on civil engineering structures. Aeroelastic analysis becomes a prime criterion to be confirmed during the structural design because the long-span suspension bridges are prone to the aerodynamic instabilities caused by wind. If the wind velocity exceeds the critical velocity that the bridge can withstand, then the bridge fails due to the phenomenon of flutter. The aeroelastic simulation is carried out using both Computational Fluid Dynamic(CFD) and Computational Structural Dynamic(SCD) schemes.

• Advances in Computational Design
• /
• 제7권1호
• /
• pp.69-79
• /
• 2022

In this research, the aeroelastic instability of a tail section manufactured from aluminum isotropic material with different shell thickness investigated. For this purpose, the two degrees of freedom flutter analytical approach are used, which is accompanied with simulation by finite element analysis. Using finite element analysis, the geometry parameters such as the center of mass, the aerodynamic center and the shear center are determined. Also, by simulation of finite element method, the bending and torsional stiffnesses for various thickness of the airfoil section are determined. Furthermore, using Lagrange's methods the equations of motion are derived and modal frequency and critical torsional/bending modes are discussed. The results show that with increasing the thickness of the isotropic airfoil section, the flutter and divergence speeds increased. Compared of the obtained results with other research, indicates a good agreement and reliability of this method.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.173-176
• /
• 2004

In this study, the multidisciplinary aerodynamic-structural optimal design is carried out for the supersonic fighter wing. Through the aeroelastic analyses of the various candidate wings, the aerodynamic and structural performances are calculated such as the lift coefficient, the drag coefficient and the deformation of the wing. In general, the supersonic fighter is maneuvered under the various flight conditions and those conditions must be considered all together during the design process. The multi-point design, therefore, is deemed essential. For this purpose, supersonic dash, long cruise range and high angle of attack maneuver are selected as representative design points. Based on the calculated performances of the candidate wings, the response surfaces for the objectives and constraints are generated and the supersonic fighter wing is designed for better aerodynamic performances and less weights than the baseline. At each design point, the single-point design is performed to obtain better performances. Finally, the multi-point design is performed to improve the aerodynamic and structural performances for all design points. The optimization results of the multi-point design are compared with those of the single-point designs and analyzed in detail.

• 한국항공우주학회지
• /
• 제32권6호
• /
• pp.56-63
• /
• 2004

본 연구에서는 공력 압축성 효과를 고려하여 플랩이 있는 무인기 카나드에 대한 동적 공탄성 해석을 수행하였다. 고려한 해석 모델은 국내에서 개발 후보로 검토된 모델 중 하나인 CRW(Canard-Rotor-Wing) 무인기의 전운동(all-movable) 카나드이다. 초기 설계 데이터를 기반으로 하여 등가구조 날개 모델을 구성하였다. 엄밀한 공탄성 특성해석을 위해 주파수 및 시간영역 해석기법이 모두 적용되었으며, 카나드 및 플랩 연결부의 회전강성 변화에 대한 매개변수 연구를 수행하였다. 플랩이 있는 전운동 조종면의 경우 각 조종축에서의 등가회전강성은 공탄성 안정성에 중요한 설계인자이다. 본 연구를 통하여 설계 초기단계에서 동적공탄성 안정성에 미치는 영향을 파악하였으며 관련 해석결과들을 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.680-685
• /
• 2006

This paper describes the aeroelastic stability test of the small-scaled 'Next-Generation Blade(NRSB)' with NRSH (Next-Generation Hub System) and HCTH hingeless hub system in hover and forward flight conditions. Excitation tests of rotor system installed in GSRTS(General Small-scale Rotor Test System) at KARI(Korea Aerospace Research Institute) were tarried out to get lead-lag damping ratio of blades with flexures as hub flexure. MBA(Moving Block Analysis) technique was used for the estimation of lead-lag damping ratio. First, NRSB-1F blades with HCTH hub system, Then NRSB-1F with NRSH hub system were tested. Second, NRSB-2F blades with NRSH hub system were tested. Tests were done on the ground and in the wind tunnel according to the test conditions of hover and forward flight, respectively. Non-rotating natural frequencies, non-rotating damping ratios and rotating natural frequencies were showed similar level fir each cases. Estimated damping ratios of NRSB-1F, NRSB-2F with HCTH and NRSH were above 0.5%, and damping ratio increased by collective pitch angle increasement. Furthermore damping ratios of NRSB-2F were higher than damping ratios of NRSB-1F in high pitch angle. It was confirmed that the blade design for noise reduction would give observable improvement in aeroelastic stability compared to paddle blade and NRSB-1F design.

• 한국소음진동공학회논문집
• /
• 제16권8호
• /
• pp.848-856
• /
• 2006

This paper describes the aeroelastic stability test of the small-scaled 'Next-generation Blade(NRSB)' with NRSH (next-generation hub system) and HCTH hingeless hub system in hover and forward flight conditions. Excitation tests of rotor system installed in GSRTS (general small-scale rotor test system) at KARI (Korea Aerospace Research Institute) were carried out to get lead-lag damping ratio of blades with flexures as hub flexure. MBA(moving block analysis) technique was used for the estimation of lead-lag damping ratio. First, NRSB-1F blades with HCTH hub system, then NRSB- 1F with NRSH hub system were tested. Second, NRSB-2F blades with NRSH hub system were tested. Tests were done on the ground and in the wind tunnel according to the test conditions of hover and forward flight, respectively. Non-rotating natural frequencies, non-rotating damping ratios and rotating natural frequencies were showed similar level for each cases. Estimated damping ratios of NRSB-1F, NRSB-2F with HCTH and NRSH were above 0.5%, and damping ratio increased by collective pitch angle increasement. Furthermore damping ratios of NRSB-2F were higher than damping ratios of NRSB-1F in high Pitch angle. It was confirmed that the blade design for noise reduction would give observable improvement in aeroelastic stability compared to paddle blade and NRSB-1F design.

• 한국전산구조공학회논문집
• /
• 제17권3호
• /
• pp.271-278
• /
• 2004

본 논문에서는 토목 구조물에 대한 바람의 영향을 알아보기 위하여 수치 기법으로 해석하였다. 지간이 긴 현수교는 바람에 의한 공력탄성학적 분안정성에 놓일 수 있으므로, 설계 시 공기력은 주요한 고려사항이며 공탄성 안정성은 반드시 확인되어야 한다. 풍속이 임계 플러터 속도를 넘어서면, 교량 구조물은 바람과 상호작용에 의한 플러터 현상으로 인해 붕괴된다. 교량 단면의 공탄성 해석을 위해 전산유체역학과 전산구조해석을 이용하였으며, Navier-Stokes방정식을 사용하여 공기력을 구하였다. 본 연구에서는 구조 강성에 따른 교량 구조물의 임계 플러터 속도가 연구된다. 교량 단면의 임계 플러터 속도는 구조강성의 변화에 민감함을 확인할 수 있었다.

• 한국항공우주학회지
• /
• 제45권4호
• /
• pp.269-275
• /
• 2017

전투기 형태의 항공기는 외부 장착물의 중량, 공력 특성 및 조합 형태에 따라 공력탄성학적 특성에 상당한 영향을 받게 된다. 따라서 항공기를 운용하기에 앞서 기본적으로 모든 외부 장착물 조합에 대한 공력탄성학적 안정성이 반드시 검증되어야 한다. 그러나 공력탄성학적 안정성을 분석하기 위해서는 항공기의 구조, 중량, 조종면 특성, 외부형상 등과 같은 설계 데이터가 필요함에 따라, 원칙적으로 항공기 플랫폼을 개발한 제작사 이외에는 적합성 입증을 수행하는데 상당한 제한이 따를 수밖에 없다. 그럼에도 불구하고 작전환경의 변화 및 항전기술의 발전으로 인해 원 제작사의 지원 없이 항공기를 운용하는 국가 또는 기관에서 자체적으로 신규 장착물을 장착해야 하는 상황이 있을 수 있다. 본 논문에서는 이와 같이 설계 데이터를 갖고 있지 않은 도입 항공기에 대해 신규 장착물을 장착하는데 필요한 공력탄성학적 적합성 입증 방안에 대해 기술하였다.