• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.2
• /
• pp.263-270
• /
• 2024

As unmanned aerial vehicles(UAVs) and sensors have been developed in a variety of ways, it has become possible to update information on the ground faster than existing aerial photography or remote sensing. However, acquisition and input of ground control points(GCPs) UAV photogrammetry takes a lot of time, and geometric distortion occurs if measurement and input of GCPs are incorrect. In this study, RGB-based orthophotos were generated to reduce GCPs measurment and input time, and comparison and evaluation were performed by applying feature point algorithms to target orthophotos from various sensors. Four feature point extraction algorithms were applied to the two study sites, and as a result, speeded up robust features(SURF) was the best in terms of the ratio of matching pairs to feature points. When compared overall, the accelerated-KAZE(AKAZE) method extracted the most feature points and matching pairs, and the binary robust invariant scalable keypoints(BRISK) method extracted the fewest feature points and matching pairs. Through these results, it was confirmed that the AKAZE method is superior when performing geometric correction of the objective orthophoto for each sensor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7424-7429
• /
• 2014

GPS (Global Positioning System) is currently used widely in the ground section, such as surveying, mapping, geodesy, geophysics, the aviation section, such as aerial navigation and aerial photography, the sea section, including ship navigation and bathymetry, and space section, such as the satellite orbit and Earth's orbit. On the other hand, its use is limited due to the professional knowledge and expense to process the data for precise analysis. As a result, a web-based data processing solution for precise point positioning using GPS data was developed by c# for non-specialized people to process easily. In addition, the crustal movement speed of Korea after an earthquake was calculated to be an average of 30mm/year for each CORS, suggesting that it is possible to monitor crustal movement.

• Journal of Wetlands Research
• /
• v.11 no.1
• /
• pp.65-73
• /
• 2009

We investigated characteristics of channel morphology, flora and vegetation distribution at the main and the abandoned channels of the Hwangguji Stream and the Cheongmi Stream. The analysis of aerial photographs and old topographical maps showed that the abandoned channels were made by cut-off from the main channel due to the construction of artificial levee. The total number of species and percentage of exotic plants at the main channels were higher than those at the abandoned channels. At the abandoned channel, the percentage of species number of hydrophytes and hygrophytes was higher than those at the main channels in the both stream. The results of principal component analysis (PCA) showed that the floral structure between at the main and the abandoned channel was more similar in the Hwangguji Stream than that in the Cheongmi Stream. The relative distribution areas of hydrophytes and hygrophytes at two abandoned channels were much higher than those at the main channels in the both stream. The dominant plant was an emergent macrophyte, Zizania latifolia at two abandoned channels. Therefore, flora and vegetation at the abandoned channel showed more hydric and lentic characteristics and provided diversity on the landscape level.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.02a
• /
• pp.16-21
• /
• 2004

In recent years, the importance of geospatial data have been emphasized not only for the national GIS programs and but also in the value added commercial and industry markets. There is no doubt that GIS, GPS, aerial and satellite imagery data were provided powerful tools to support national information infrastructure for geospatial database. While great emphasis has been laid on the geospatial data, there has been little analysis or evaluation of how to maximize the benefits of using these information sources. Also, with the proliferation of geographic data and information sources such as satellite imagery, digital aerial photography, digital topographic and vector data, there is a great need to inform professionals from all disciplines as to the benefits of these information sources and how to best put them to use within any given application. From the first publication of KSGPC(Korean Society of Geodesy, Photogrammetry and Cartography) papers in 1981, our objective was, and is, to help develop the wider spectrum of GIS in the academy and industry by exposing new users to the benefits of GIS, remote sensing, mapping, GPS and photogrammetry. In this presentation, we will introduce KSGPC works and will evaluate GIS-related governmental policies and programs in Korea for the past and the future to present different status between Korea and Russia. It is now important to investigate lessons learnt from two countries' experiences and developed an empirical framework to combine outcomes from GIS-related researches in Korea and Russia. This may enable GIS professionals to gain a wider range of experiences in the international context, and consequently, help them to develop new markets for GIS. Therefore, we arranged the possible action items and interesting points to corporate and to promote the academic growth in the practice of GIS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.311-316
• /
• 2006

Despite geospatial information systems are widely used in many different fields as a powerful tool for spatial analysis and decision-making, their capabilities to handle realistic 3-D urban environment are very limited. The objective of this work is to integrate the recent developments in 3-D modeling and visualization into GIS to enhance its 3-D capabilities. To achieve a photorealistic view, building models are collected from a pair of aerial stereo images. Roof and wall textures are respectively obtained from ortho-rectified aerial image and ground photography. This study is implemented by using ArcGIS as the work platform and ArcObjects and Visual Basic as development tools. Presented in this paper are 3-D geometric modeling and its data structure, texture creation and its association with the geometric model. As the results, photorealistic views of Purdue University campus are created and rendered with ArcScene.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.775-784
• /
• 2023

Drone images are being used more and more actively in the fields of surveying and spatial information, and are rapidly replacing existing aerial and satellite images. The technology of quickly acquiring real-time data at low cost and processing it is now being applied to actual industries beyond research. However, there are also problems encountered as this progresses. When high-resolution spatial information is acquired using a general 2D flight plan for a terrain with sever undulations, problems arise due to the difference in resolution of the data. In particular, when a low-altitude high-resolution image is taken using a drone in a mountainous or steep terrain, there may be a problem in image matching due to a resolution difference caused by terrain undulations. This problem occurs because a drone acquires data while flying on a 2D plane at a fixed altitude, just like conventional aerial photography. In order to acquire high-quality 3D data using a drone, the scale difference for the shooting distance should be considered. In addition, in order to obtain facade images of large structures, it is necessary to take images in 3D space. In this study, in order to improve the disadvantages of the 2D flight method, a 3D flight plan was established for the study area, and it was confirmed that high-quality 3D spatial information could be obtained in this way.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.57-68
• /
• 1999

In case of topographic information construction it is most important as basemap determines the success or failure of GIS It is argument that digitizing works of basemap are divided by NGIS and PBLIS. So, it have to accompany the combination and application of cadastral information for constructing a usful basemap. In this study, we generated ortho image map using 1:5,000 aerial-photography image, present the comparative analysis for the overlay accuracy and map revision of topographic and cadastral information using ortho image map to base map. So, we present application schemes for land use, environment, and city planning field as well as union database by overlaying of image map and cadastral information.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.100-100
• /
• 2003

The purpose of this study is to reveals spatial relationships between landslides and geospatial data set, map the landslide susceptibility using the relationships and verify the landslide susceptibility using the landslide occurrence data in Bosun area in 1998. Landslide locations were detected from aerial photography and field survey and topography, soil, forest, and land use data sets were constructed as a spatial database using GIS. As the landslide occurrence factors, slope, aspect, curvature and type of topography, texture, material, drainage and effective thickness of soil, type, age, diameter and density of wood and land use were used. Is extract the relationship between landslides and geospatial database, Bayesian probability methods, likelihood ratio and weight of evidence, were applied and the ratio and contrast value that is W$\^$＋/- W$\^$-/ were calculated. The landslide susceptibility index was calculated by summation of the likelihood ratio and contrast value and the landslide susceptibility maps were generated using the index. As a result, it is expected that spatial relationships between landslides and geospatial database is helpful to explain the characteristics of landslide and the landslide susceptibility map is used to reduce associated hazards, and to plan land use and construction.

• Journal of Environmental Impact Assessment
• /
• v.18 no.6
• /
• pp.387-392
• /
• 2009

As Our society's environmental awareness and concern the significant increases, the importance of the legal system for environmental conservation such as the Prior Environmental Review System, Environmental Impact Assessment is growing increasingly. but, still critical issues are present such as reliability. Though there could be various causes such as the system or procedures etc. Above all, basically the environmental data problem is the critical cause. Therefore, this study was trying to improve the environmental data accuracy using the high-resolution color aerial photography, LiDAR data and Object Oriented Classification method. And in this study, classification based on coverage percentage of a particular species was attempted through the multi-resolution segmentation and multi-level classification method. The classification result was verified by comparison with 11 points local survey data. All 11 points were classified correctly. And even though the exact coverage percentage of the particular species did not be measured, It was confirmed that the species was occupied similar portion. It is important that the environmental data which can be used for the conservation value assessment could be acquired.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.454-458
• /
• 2007

Nonpoint source (NPS) pollution is a serious problem causing the degradation of soil and water quality. Concentrated overland flow is the primary transport mechanism for a large amount of NPS pollutants from hillslope areas to downslope areas in a watershed. In this study, a soil erosion model, nLS model, to identify transitional overland flow regions (i.e., ephemeral gully head areas) was developed using the kinematic wave overland flow theory. Spatial data, including digital elevation models (DEMs), soil, and landcover, were used in the GIS-based model algorithm. The model was calibrated and validated using gully head locations in a large agricultural watershed, which were identified using 1-m aerial photography. The model performance was better than two previous approaches; the overall accuracy of the nLS model was 72 % to 87 % in one calibration subwatershed and the mean overall accuracy was 75 to 89 % in four validation subwatersheds, showing that the model well predicted potential transitional erosion areas at different watersheds. However, the user accuracy in calibration and validation was still low. To improve the user accuracy and study the effects of DEM resolution, finer resolution DEMs may be preferred because DEM grid is strongly sensitive to estimating model parameters. Information gained from this study can improve assessing soil erosion process due to concentrated overland flow as well as analyze the effect of microtopographic landscapes, such as riparian buffer areas, in NPS control.