• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.282-288
• /
• 2013

This study was conducted to investigate the quality characteristics of eight everbearing strawberry cultivars and the effect of precooling treatment to maintain the quality during storage and shelf life of 'Charlotte'. Several quality parameters including firmness, soluble solids content (SSC), color, soluble sugars, and organic acids were evaluated. For Successful marketing everbearing strawberries required more than 1 N of firmness and $6^{\circ}Brix$ of SSC, respectively. 'Albion', 'Charlotte', and 'Goha' cultivars were higher in fruit SSC and 'Charlotte' cultivar was higher in fruit firmness among eight cultivars examined in this study. Fruit had more bright red color in 'Charlotte', 'Flamingo', 'GW-4', and 'San Andreas', which may reflect the consumer acceptance. Physicochemical characteristics of 'Charlotte' strawberry after with/without room precooling treatment were evaluated during storage at $4^{\circ}C$, $10^{\circ}C$, and $25^{\circ}C$ and additional 3 days at $25^{\circ}C$ for shelf-life. Weight loss increased about 8% in the fruits stored at $25^{\circ}C$ for 3 days, while in low temperature storage was about 2% for 7 days showing precooling was more effect on during shelf life periods rather than storage periods. Decay was not found during storage at $4^{\circ}C$ regardless of precooling treatment, but fungal growth was found in all the treatments after transferred to room temperature. Precooling treatment did not affect fruit color in shelf life period. For advanced marketing, everbearing strawberry should maintain in low temperature less than $4^{\circ}C$ to sustain quality, but the room precooling showed less significant effect to maintain quality on 'Charlotte' cultivar.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.4
• /
• pp.227-233
• /
• 2013

'Taehan' (Avena sativa L.), a winter oat for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crops, NICS, RDA in 2012. It was derived from a cross between 'Malgwiri' and 'CI8015'. Subsequent generations were handled in bulk and pedigree selection programs at Suwon and Yeoncheon, respectively. After 2 years of preliminary and advanced yield tests, 'SO00020B-YB-15-5-9-4-3', designated as 'Gwiri78', were subsequently evaluated for earliness and forage yield during 3 years in four regions such as Yesan, Iksan-1 (Paddy), Iksan-2 (upland), and Jeju from 2010 to 2012, and finally named 'Taehan'. Over 3 years, the heading date of 'Taehan' was about 6 days earlier than that of the check cultivar 'Samhan' (May 8 and May 14, respectively), and their average forage dry matter yield harvested at the milk-ripe stage was 14.5 tone $ha^{-1}$, compared with 14.1 tone $ha^{-1}$ for the check cultivar. The cultivar 'Taehan' was lower than that of the check cultivar 'Samhan' in terms of protein content (6.3% and 7.7%, respectively) and total digestible nutrients (60.7%, and 62.1%, respectively). The TDN yield was more than that of the check cultivar (9.1 tone $ha^{-1}$ and 8.0 tone $ha^{-1}$, respectively). Fall cropping of 'Taehan' is recommended only in areas where average daily minimum mean temperatures in January are > $-6^{\circ}C$, and it should not be cultivated in mountainous areas, where frost damage is likely to occur.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.471-480
• /
• 2007

The aim of the present study was to determine the effects of a low-energy finisher diet on feed and growth efficiencies and carcass traits of ‘high’-market weight (MW) finishing pigs and thereby to extrapolate optimal dietary energy level for the high-MW swine. A total of 160 (Yorkshire × Landrace) × Duroc-crossbred finishing gilts and barrows weighing approximately 90 kg were fed a low-energy (3,200 kcal DE/kg) diet (LE) or control (3,400 kcal) diet (CON) ad libitum in 16 pens up to 135- and 125-kg live weights, respectively, at which the animals were slaughtered and their carcasses were analyzed [2 (sex) × 2 (diet) factorial experimental design]. Average daily gain, average daily feed intake and feed efficiency did not differ between the two sex or diet groups. Backfat thickness was less (P<0.05) in LE (22.4 mm) than in CON group (24.3 mm) in gilts, but not in barrows (24.4 ± 0.4 mm). The percentage of C- & D-grade carcasses was over 90% because of the ‘over-weight’ problem in gilts, whereas in barrows, percentages of A plus B grades and C plus D grades were 79% and 21%, respectively. The yield percentage of each trimmed primal cut per total trimmed cuts (w/w) did not differ between the two sex or diet groups. Physicochemical characteristics of longissimus muscle including color (lightness and redness), pH, drip loss and chemical composition, which overally were within the range of normal carcass, also did not differ between the two sex or diet groups. In conclusion, both LE and CON are judged to be adequate for the high-MW swine during the latter finishing period. If fat deposition of a given herd of high-MW pigs needs to be suppressed by a dietary treatment, the energy content of the diet will have to be reduced to a level lower than 3,200 kcal DE/kg.

• Journal of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.415-422
• /
• 1986

The metal-support interaction of copper oxide supported on ${\gamma}$-alumina and silica was studied by X-ray diffraction (XRD) and temperature-programmed reduction(TPR). It was found that XRD pattern of CuO can not be observed up to 5.0wt % copper content for CuO/${\gamma}-Al_2O_3$ while CuO/$SiO_2$ sample shows the CuO pattern even at 2.5wt% copper content. $H_2-$TPR of CuO/${\gamma}-Al_2O_3$ system shows four major peaks at 145${\circ}C$, 185${\circ}C$, 210${\circ}C$, and 250${\circ}C$. In the case of CuO/$SiO_2$, a large peak at 250${\circ}C$ was appeared accompanying a small peak at 425${\circ}C$. Comparing the TPR peaks with that of copper aluminate which was prepared from the calcination of CuO/${\gamma}-Al_2O_3$ at 1000${\circ}C$, the peaks at around 145${\circ}C$, 200${\circ}C$ (185${\circ}C$ and 210${\circ}C$), and 250${\circ}C$ were corresponded to $Cu^+$ ion in CuO interacting ${\gamma}-Al_2O_3$, $Cu^+$ ions in defect sites of ${\gamma}-Al_2O_3$ and $Cu^{2+}$ ion in the bulk CuO layer, respectively. From the results, it was concluded that there is considerable metal-support interaction in CuO on ${\gamma}-Al_2O_3$ and the interaction results in a stabilization of $Cu^+$ ion in the system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.181-186
• /
• 2011

Thermal stability of the $TiO_2$ SCR catalyst with W03 loading was investigated in terms of structural and morphological analyses. The $TiO_2$ catalysts with 10 w% $WO_3$ content and without $WO_3$ were prepared. which were heat-treated at $800^{\circ}C$ for 5 h. It was found that the catalytic acidity was decreased by thermal degradation in the $WO_3-TiO_2$ specimen that relatively less than the $TiO_2$ specimen from FT-IR analysis. The phase transition of the $TiO_2$ catalyst from anatase to rutile was increased by heal-treatment, and the percentage of the rutile phase was 28.4 % in the $WO_3-TiO_2$ and 22.9 % in the $TiO_2$. A shell region of $WO_3$ distinguished from a $TiO_2$ particle was also observed in the grain boundary region, and the $WO_3$ led to the suppression of grain growth. It could be confirmed that the suppression of grain growth can contribute to the improvement of catalytic properties for thermal stability more than the increase of anatase-rutile phase transformation which cause the reduction of the catalytic activity in the $TiO_2$ SCR catalyst by the presence of $WO_3$.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.115-124
• /
• 2016

The purpose of this paper is to verify improvement of the basic quality of food resources and make the pork legs as the more advanced food products after taking special processing steps with the mixture of traditional medical herbs and hot water extracted coffee meal. The pH level of the pettitoes(Jokbal) showed the highest rate among the control group but it showed no statistical differences in the moisture content between the control and the pettitoes(Jokbal) processed with coffee waste extract as an additional component. In addition, the levels of crude fat and crude ash showed slight increases as the addition of the amount increase. In case of the proteins, however, tendency of slight was decreased but it was not significantly difference as the amount increases. The sodium rate in the pettitoes(Jokbal) was higher in the additional group than in the control group. Texture analysis showed a tendency of wide decrease in the hardness and chewiness depending on amount of the added coffee waste extract. On the other hand, as for the cohesiveness and springiness, there was no significant difference with the control group. In case of the lightness value, as the amount of added coffee waste extract is increased from 10% to 20% and 30%, the 'L' value was reduced significantly compared to that of the control. And the 'a' value was not significantly different compared to the coffee waste extract foil impregnated furniture control. But the 'b' values were significantly increased in accordance with the result of increasing the amount of control is at the lowest level. The result may come from the influence of coffee waste extract, which affects the color of the pettitoes(Jokbal). According to the sensory evaluation, the pork part with 10% of coffee waste extract showed the highest score in looking, chewiness, smell and preference, resulting in the improvement in quality of the pettitoes(Jokbal).

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.81-87
• /
• 1979

In order to observe the lasting effect of NK-compound mineral fertilizer and organic compound fertilizer including Myweon organic liquid fertilizer, a pot experiment was conducted with rice (Oriza Sativa) variety: Nong Back. These fertilizers were applied as basal and the same amount of urea form of nitrogen was top dressed about a month after transplanting, July seventh, 1977. Results obtained are as follows; 1. The lasting effect of various fertilizers were laid in following decreasing order; Myweon liquid < Organic compound fertilizer (Myweon coop. made) > NK-compound fertilizer (Chosun coop. made) Single fertilizer. It was considered that organic matter served as microbial feed and lead a temporary fixation of available plant nutrients in the soil, and the reduced surface area of the compound fertilizers slowed down the availability of the fertilizers. 2. The fertilizer showing greater lasting effect produced more panicles per hill and less grains per panicle than the fertilizers showing less lasting effect, and brought low maturity, which resulted in low paddy yield the paddy producing efficiency of nitrogen absorbed by straw was also low in the former fertilizers. Such advanced effect of the former fertilizer was considered to be related with the variety of early maturity and unseasonable topdressing of fertilizer which made at the maximum tillering stage. 3. For the production of Japonica type paddy with heavy fertilization which may required to depress the early growth a little and promote the late growth, it might be necessary to develop slow releasing fertilizers such as single fertilizer formulated to a large grains or compound fertilizer containing organic matter. 4. If the nitrogen content of paddy, Nong Back, far excess 0.64 or 0.65% and reaches 0.68% or above, the yield of the variety seemed to be decreased remarkbly through the low maturity rate and thousand grain weight.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.63-94
• /
• 2002

On the purpose to suggest an advanced scheme in assessing the domestic wheat quality, this paper reviewed the inspection systems of wheat in major wheat producing countries as well as the quality criteria which are being used in wheat grading and classification. Most wheat producing countries are adopting both classifications of class and grade to provide an objective evaluation and an official certification to their wheat. There are two main purposes in the wheat classification. The first objectives of classification is to match the wheat with market requirements to maximize market opportunities and returns to growers. The second is to ensure that payments to glowers aye made on the basis of the quality and condition of the grain delivered. Wheat classes has been assigned based on the combination of cultivation area, seed-coat color, kernel and varietal characteristics that are distinctive. Most reputable wheat marketers also employ a similar approach, whereby varieties of a particular type are grouped together, designed by seed coat colour, grain hardness, physical dough properties, and sometimes more precise specification such as starch quality, all of which are genetically inherited characteristics. This classification in simplistic terms is the categorization of a wheat variety into a commercial type or style of wheat that is recognizable for its end use capabilities. All varieties registered in a class are required to have a similar end-use performance that the shipment be consistent in processing quality, cargo to cargo and year to year, Grain inspectors have historically determined wheat classes according to visual kernel characteristics associated with traditional wheat varieties. As well, any new wheat variety must not conflict with the visual distinguishability rule that is used to separate wheats of different classes. Some varieties may possess characteristics of two or more classes. Therefore, knowledge of distinct varietal characteristics is necessary in making class determinations. The grading system sets maximum tolerance levels for a range of characteristics that ensure functionality and freedom from deleterious factors. Tests for the grading of wheat include such factors as plumpness, soundness, cleanliness, purity of type and general condition. Plumpness is measured by test weight. Soundness is indicated by the absence or presence of musty, sour or commercially objectionable foreign odors and by the percentage of damaged kernels that ave present in the wheat. Cleanliness is measured by determining the presence of foreign material after dockage has been removed. Purity of class is measured by classification of wheats in the test sample and by limitation for admixtures of different classes of wheat. Moisture does not influence the numerical grade. However, it is determined on all shipments and reported on the official certificate. U.S. wheat is divided into eight classes based on color, kernel Hardness and varietal characteristics. The classes are Durum, Hard Red Spring, Hard Red Winter, Soft Red Winter, Hard White, soft White, Unclassed and Mixed. Among them, Hard Red Spring wheat, Durum wheat, and Soft White wheat are further divided into three subclasses, respectively. Each class or subclass is divided into five U.S. numerical grades and U.S. Sample grade. Special grades are provided to emphasize special qualities or conditions affecting the value of wheat and are added to and made a part of the grade designation. Canadian wheat is also divided into fourteen classes based on cultivation area, color, kernel hardness and varietal characteristics. The classes have 2-5 numerical grades, a feed grade and sample grades depending on class and grading tolerance. The Canadian grading system is based mainly on visual evaluation, and it works based on the kernel visual distinguishability concept. The Australian wheat is classified based on geographical and quality differentiation. The wheat grown in Australia is predominantly white grained. There are commonly up to 20 different segregations of wheat in a given season. Each variety grown is assigned a category and a growing areas. The state governments in Australia, in cooperation with the Australian Wheat Board(AWB), issue receival standards and dockage schedules annually that list grade specifications and tolerances for Australian wheat. AWB is managing "Golden Rewards" which is designed to provide pricing accuracy and market signals for Australia's grain growers. Continuous payment scales for protein content from 6 to 16% and screenings levels from 0 to 10% based on varietal classification are presented by the Golden Rewards, and the active payment scales and prices can change with market movements.movements.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.243-254
• /
• 2005

Great Britain and the United States and Finland are having an interest in long policy subject about child design education through early design education. And they approaches and practices it systematically. The research about the design learning program instance of advanced nation of primary school's design education for various objective is necessary for use with the fundamental reference data for an elementary design education. And so, This research presented the program instance investigation and analysis result of British primary school's design education. U.K is teaching an primary design education from two subjects of Art & Design and Design and Technology which is a legal subject with national curriculum. The analysis result of design relation unit learning program of two subjects is: Design relation unit learning programs of 'Design and Technology' subject's 20 unit which except 4 food relation unit is largely scientific engineering contents that include utility function contents in part. The reason is as behavior styles based on Design process solve problems scientifically & rationally. Design relation 6 units in subject of Art & Design which except the units which relates with the pure fine arts and architecture in 19 units is aesthetic-symbolic and utility-functional contents largely. And so, the result was analyzed about relation of scientific-engineering content of 'Arts & Design' subject is insufficient comparing with 'Design and Technology' subject Specially, I think that the design relation's unit learning program instances of 'Design and Technology' subject of the British primary school which have been presented by this research paper is a possibility becoming one reference model for a program development. And so I expects that this research could be applied in the program development for the primary design education of primary teacher & education agency.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.762-767
• /
• 2009

In this study, the feasibility of using vegetable oil extracted from tropical crop seed as a biodiesel feedstock was investigated by producing biodiesel and analysing the quality parameters as a transport fuel. In order to produce biodiesel efficiently, two step reaction process(pre-treatment and transesterificaion) was required because the tropical crop oil have a high content of free fatty acids. To determine the suitable acid catalyst for the pre-esterification, three kinds of acid catalysts were tested and sulfuric acid was identified as the best catalyst. After constructing the experimental matrix based on RSM and analysing the statistical data, the optimal pre-treatment conditions were determined to be 26.7% of methanol and 0.982% of sulfuric acid. Trans-esterification experiments of the pre-esterified oil based on RSM were carried out, then discovered 1.24% of KOH catalyst and 22.76% of methanol as the optimal trans-esterification conditions. However, the quantity of KOH was higher than the previously established KOH concentration of our team. So, we carried out supplemental experiment to determine the quantity of catalyst and methanol. As a result, the optimal transesterification conditions were determined to be 0.8% of KOH and 16.13% of methanol. After trans-esterification of tropical crop oil, the produced biodiesel could meet the major quality standard specifications; 100.8% of FAME, 0.45 mgKOH/g of acid value, 0.00% of water, 0.04% of total glycerol, $4.041mm^2/s$ of kinematic viscosity(at $40^{\circ}C$).