• 한국BIM학회 논문집
• /
• 제7권1호
• /
• pp.1-8
• /
• 2017

Aesthetic design guidelines of bridges were developed in many countries. As iconic structures, bridges need to be attractive and durable as they serve many generations. In this paper, a new design process of concrete structures considering 3D shapes and texture was proposed. The 3D design needs to consider function, economy, advanced technology, tradition and local culture. 3D printers enable the combination of artistic design and engineering design for concrete structures. Parametric modeling with iconic design was utilized to produce 3D formworks. As a pilot project, a railway bridge girder was designed and the proposed technologies were applied. Detail requirements to improve constructability and quality of concrete surfaces were derived. From the pilot applications, design guidelines were suggested.

• 한국주거학회논문집
• /
• 제23권6호
• /
• pp.49-59
• /
• 2012

This study suggested a new model in consideration of long life and constructability of apartment house suggested in the former part. New model suggested the possibility of cost saving based on the idea that people trend to reject because of the recognition that the new model would cost a lot of expense which work as the barrier for the expansion and distribution at the local market so as to prepare the ground for its activation. The Study was aimed at verifying the possibility of cost saving through comparing it with the existing standard apartment house system centered on the skeleton and cladding system among the new structural design models suggested in the former part. Assuming that these existing standard both models should be changed structural design into new model system, the quantity volume, cost and construction period along with the alteration of finished materials between two models were compared altogether. Simultaneously BIM library was built for easy taking-off bill of quantity and consideration of working methodology for construction working cycle, which was translated into construction cost so as to derive the cost of the two subject systems to be counted. Through the analysis, it was concluded that new model would secure variability in the future and constructability along with shortening the construction period (29%) and achieve cost saving (13%) of construction against the those of existing model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.163-164
• /
• 2012

Recently new construction system, the Infill Modular Construction System, is being emphasized depending on the industrialized technology introduction and the needs of high-rise housing. In order to applicate the Infill Modular Construction System and activate the domestic market, development of insufficient element technologies against the advanced technologies should be preceded and mobile device development of Infill Unit Module which is differentiated from the existing modular construction systems should be needed urgently. As advanced research for the activation of the Infill Modular Construction System, this research aims to develop Infill Unit Module's mobile device. This is expected to improve the constructability of Infill Unit Module. In addition development of mobile device considering weight of Infill Unit Module and construction errors are being planned.

• 한국건축시공학회지
• /
• 제23권4호
• /
• pp.465-476
• /
• 2023

공동주택 지하층 공사시 발생하는 생산성 저하 문제를 해결하기 위한 개선책으로 필요한 PC 더블월(Double Wall) 공법을 개발하였다. 개발 공법은 기존의 PC 더블월 공법과 차별화되어, 지하 주동부의 다양한 PC 형상에 대응할 수 있고, 수평 및 수직 재하 등 부담 하중의 축력비에 충분히 견딜 수 있는 구조적으로 안전한 PC 더블월 공법으로서, 현장 테스트베드를 통하여 설계 및 제작기술, 그리고 시공기술의 적용성 분석하고 개발 공법의 실물 사이즈에 대한 목업테스트를 통해 품질성능을 검토하였다. 목업 테스트 수행 결과, PC 더블월의 기립 설치 및 내부 채움 콘크리트 타설시 균열이나 변형은 관측되지 않아, 구조적으로 안전한 것으로 나타났으며, 내부 채움 콘크리트는 양호한 품질 상태를 유지하였다. 복합적인 요인으로 인해 개발 공법을 실제 APT 주동부 지하층에 적용하지 못해 개발공법의 시공성 분석은 개발 자료를 기반으로한 설치 전문가들의 인터뷰를 통해 분석하였다. 개발 디테일을 적용하여 PC 더블월을 두가지 폭(W=2.4m, W=3.2m)으로 제작하여 설치하는 경우에 대해 PC 부재 설치 전문가 3명과 인터뷰를 수행하였다. 재래식 현장 타설 공법이 통상 47일/층~68일/층 소요되는 데 반해, 제안공법을 적용하면 공기일수가 20일/층~29일/층 소요되는 것으로 나타나, 공기단축 측면에서 효과가 큰 것으로 나타났다. 추후 연구 수행 방향으로서, 실제 APT 주동부 지하층에 적용하여, 시공상 관리 이슈를 추가적으로 도출하고, 공기단축 및 품질 유지에 대한 결과를 검증할 예정이다.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.89-102
• /
• 2021

Rapid construction of prefabricated bridges requires minimizing the field work of precast members and ensuring structural stability and constructability. In this study, we conducted experimental and analytical investigations of transverse joints of prefabricated T-girder bridge superstructures to verify the flexural performance and serviceability. In addition, we conducted parametric studies to identify the joint parameters. The results showed that both the segmented and continuous specimens satisfied the ultimate flexural strength criterion, and the segmented specimen exhibited unified behavior, with the flexural strength corresponding to that of the continuous specimen. The segmented specimens exhibited elastic behavior under service load conditions, and the maximum crack width satisfied the acceptance criteria. The reliability of the finite element model of the joint was verified, and parametric analysis of the convexity of the joint section and the compressive strength of the filler concrete showed that the minimum deflection and crack width occurred at a specific angle. As the strength of the filler concrete increased, the deflection and crack width decreased. However, we confirmed that the reduction in the crack width was hardly observed above a specific strength. Therefore, a design suitable for prefabricated bridges and accelerated construction can be achieved by improving the joint specifications based on the required criteria.

• 한국공간구조학회논문집
• /
• 제17권1호
• /
• pp.59-67
• /
• 2017

In this study, load transfer tests based on KCI-PS101 were conducted to verify the performance of spiral anchorage zone reinforcement for banded post-tensioning (PT) monostrands. With results, the compressive strength of spiral reinforcement was increased by about 20% than that of specimens with two horizontal steel bars and 8% than that of U-shaped bars. Advanced spiral reinforcement for corner increases compressive strength and can resist the spalling forces or fall-out effect at the corner by shear. The ratio of maximum load to amount of steel of the spiral reinforcement is about twice than that of U-shaped reinforcement. With increase of compressive strength capacity and improvement of constructability, the spiral reinforcement is considered to have advantages of promoting the performance of PT anchorage zone compared to conventional methods.

• 한국CDE학회논문집
• /
• 제20권2호
• /
• pp.171-181
• /
• 2015

Building Information Modeling (BIM) provides many advantages when it is adopted in virtual design construction, to analyze constructability, etc. For this reason, advanced countries have made it mandatory to adopt BIM in public construction projects. The Korea Public Procurement Service announced that from 2016, BIM adoption will be mandatory in every construction project in Korea. Currently, however, it is not possible to fully adopt BIM in the building design process domestically because BIM-based systems have not been used broadly in Korea's building approval system (Seumter). In this research, four challenges were drawn from a focus group interview. Focusing on tackling one challenge, this paper reviewed previous research into building approval systems and the building approval systems of Singapore, the U.K. and the U.S., and identified elements of the building approval application process and presents a system to create and manage the information. The system supports the creation and management of information and 2D drawings from an IFC-based BIM model. We expect that the system will encourage designers to use BIM from the beginning of the design process and ultimately increase the efficiency of design in a BIM-based project.

• 한국건설관리학회논문집
• /
• 제5권3호
• /
• pp.153-165
• /
• 2004

현재 국내의 종합병원 건축 시 "설계단계"에서는 초기단계에서부터 병원 관리자의 병원 운영정책 및 실사용 주체인 의료진의 의견반영이 미흡하고 의료장비, 의료경향의 신속한 변화로 인하여 잦은 설계변경이 발생하며 "시공단계"에서는 병원이라는 공사의 특성에 대한 공사 관련자들의 이해부족으로 인하여 재시공이 발생되어 국내 병원공사 프로젝트 수행과정 중 공사비 증가 및 공기지연 등의 문제점이 매우 빈번하게 발생되고 있다. 본 논문에서는 전문가 면접조사 및 사례조사를 통하여 병원공사의 시공성 저해 요인을 조사하고, 파트너링 기법을 분석하여, 병원건축의 시공성 증대 방안으로 시공이전단계에 파트너링을 활용한 병원건축의 '의료 지식/정보공유 시스템'을 제안하였다. 제안된 시스템을 검증하기 위하여 실제 대형병원프로젝트에 적용하여 파트너링을 활용한 대형 병원건축에서의 시공성 증대를 위한 파트너링 모델의 적합성을 확인하였다.

• 국제초고층학회논문집
• /
• 제6권1호
• /
• pp.49-72
• /
• 2017

The Guangzhou International Finance Centre (IFC) is a landmark building that symbolizes the emerging international strength of Guangzhou, China's third largest city. It is also one of the dual iconic towers along the main axis of Guangzhou Zhujiang New Town. Arup adopted a total engineering approach in embracing sustainability and aiming at high efficiency solutions based on performance-based design principles covering structures, building services, fire engineering, vertical transportation, and façade performance to constitute an efficient and cost-effective overall building design. Through dynamic integration of architectural and engineering principles, Guangzhou IFC represents a pioneering supertall building in China. It adopts a diagrid exoskeleton structural form that is clearly expressed through the building's façade and gives the building its distinctive character. The aerodynamic shape of the building not only presents the aesthetic quality of elegant simplicity, but also reduces the effects of wind, thereby reducing the size and weight of the structure. State-of-the-art advanced engineering methods, such as optimization techniques and nonlinear finite element modelling, were applied in parallel with large-scale experimental programs to achieve an efficient and high-performance design taking into account the constructability and cost-effectiveness for a project of this scale.

• 한국강구조학회 논문집
• /
• 제25권3호
• /
• pp.233-242
• /
• 2013

현재 가장 많이 사용되는 기존 약축접합부는 브라켓 타입으로 기둥과 보를 접합하는 과정에서 수평 스티프너가 필요하며, 기둥과 브라켓의 용접접합으로 인해 용접량이 비교적 많아 접합부에서 취성파괴가 우려된다. 본 논문은 용접플레이트를 사용함으로써 기존 약축접합부가 가지는 문제점에 대한 해결책을 제시할 수 있는 신형상 약축접합부를 제작해 기존 약축접합부 및 표준 약축접합부와 비교하여 구조성능을 평가하였다. 신형상 약축접합부는 H형강 기둥웨브에서 보 단부사이의 거리를 50mm, 100mm, 150mm, 200mm로 하였다. 실험결과 신형상 약축접합부는 H형강 기둥웨브와 보 단부사이의 거리가 150mm일 때 기준 실험값과 가장 비슷한 것으로 나타났으며, 기존 약축접합부와 표준 약축접합부와 비교해 우수한 구조성능을 가지는 것으로 나타났다.