• Carbon letters
• /
• 제3권4호
• /
• pp.198-204
• /
• 2002

In this paper, impregnated activated carbon fiber (IACF) was manufactured to pitch-based activated carbon fibers (ACF) with potassium hydroxide (KOH) by using wet impregnation method to raise nitrogen oxides ($NO_x$) adsorptivity. The properties of IACF were observed using EPMA, TGA and DSC and $NO_x$ adsorptivity was observed at high and low temperature. Before and after adsorption was analyzed using ToF-SIMS for examine surface characterization of adsorbed $NO_x$. The results showed that the better adsorptivity appeared for increasing KOH ratio. So, $NO_x$ adsorptivity showed result that is proportional between KOH and the adsorbed amount. On the other hand, adsorbent that manufactured without washing was better $NO_x$ adsorptivity than adsorbent that manufactured with washing. The behavior of adsorption show that crossing time of NO and $NO_2$ delayed for a rising adsorptivity. And NO ratio increased but $NO_2$ ratio decreased according as KOH ratio increases. $NO_x$ was confirmed through surface analysis that remain in $NO_2^-$ and $NO_3^-$ form on IACF surface.

• 한국환경과학회지
• /
• 제24권11호
• /
• pp.1463-1471
• /
• 2015

The surface modified activated carbons (SMACs) were prepared with various $P_2O_5$ concentrations using two activated carbons (ACs: waste citrus peel-based activated carbon and coconut-based activated carbon). The characteristics and adsorptivity of bisphenol A (one of phenolic endocrine disrupting chemicals) were compared between ACs and SMACs. The contents of C, H and N of SMACs were similar to those of ACs, but the content of $P_2O_5$ for the former increased greatly than for the latter, due to the impregnation of $P_2O_5$ into the pores. The specific surface area, total pore volume, average pore diameter and iodine adsorptivity for the former decreased due to the impregnation of $P_2O_5$ into the pores, compared to those for the latter. The adsorptivity of bisphenol A for the former were higher than that for the latter, although specific surface area, total pore volume, average pore diameter and iodine adsorptivity for the former were lower than those for the latter.

• 공업화학
• /
• 제3권1호
• /
• pp.156-171
• /
• 1992

Chitin was isolated from crab shell. Chitosan, which was prepared by the deacetylation of chitin, was acylated to obtain N-acetyl(regenerated chitin), N-propionyl, N-butyryl, N-hexanoyl, N-decanoyl and N-maleated chitosans and their metal ion adsorption characteristics of N-acylchitosans were investigated. In order to enhance the adsorptivity, their porous beads were prepared and their adsorptivity with respect to the porosity and the adsorptivities for metal ions($Cu^{2+}$, $Ni^{2+}$, $CO^{2+}$, $Mn^{2+}$, $Ag^{+}$)were investigated. Their metal ion adsorptivities were remarkably imporved compared to those of chitin. As the larger acyl groups were introduced, adsorptivity increased, but that of N-decanoyl chitosan showed some decrease because of steric hindrance of the bulky N-decanoyl group. N-Maleated chitosan containing carboxyl group showed highly improved adsorptivity, and N-acylchitosans showed the good selective adsorption in the mixed metal ions($Cu^{2+}$, $Ni^{2+}$, $CO^{2+}$, $Mn^{2+}$ and $Ag^{+}$). They also showed excellent adsorption characteristics as chelating polymers.

• 공업화학
• /
• 제28권6호
• /
• pp.649-654
• /
• 2017

제주도에서 다량 발생하고 있는 폐감귤박을 활성화제로 KOH를 사용하여 활성탄을 제조하였고, 제조된 활성탄의 특성을 검토하였다. KOH 침적비율(100~300%), 활성화 온도($400{\sim}900^{\circ}C$) 및 활성화 시간(0.5~1.5 h)의 조건에서 각 조건이 증가할수록 요오드 흡착능은 증가하였으나 활성탄의 수율은 감소하였다. 그리고 활성화 시간의 경우 1.5 h 이상에서는 요오드 흡착능 및 활성탄 수율에서 비슷하였다. 또한 KOH 침적비율이 증가할수록 비표면적 및 세공부피는 증가하였으나 세공크기는 감소하였으며, 제조된 평균 세공크기는 $20{\sim}25{\AA}$이었다. KOH의 침적비율 300%, 활성화 온도 $900^{\circ}C$, 활성화 시간 1.5 h에서 제조된 활성탄은 비표면적 및 요오드 흡착능이 각각 $1,527m^2/g$ 및 1,246 mg/g으로 가장 높았다.

• 한국수산과학회지
• /
• 제43권5호
• /
• pp.400-405
• /
• 2010

This study investigated lead adsorption by carboxylated alginic acid and its application in cleansing cosmetics. Carboxylated alginic acid showed the highest lead adsorptivity after oxidation in a 4-6 mM hydrogen peroxide solution at $20-30^{\circ}C$ for 30-40 min. Carboxylated alginic acid adsorbed $648.1{\pm}2.8-653.0{\pm}2.9$ mg/g of lead dry mass at pH 4-6. Carboxylated alginic acid modified by hydrogen peroxide and potassium permanganate adsorbed $651.3{\pm}3.8$ and $639.9{\pm}4.0$ mg/g of lead dry mass, respectively. Carboxylated alginic acid showed higher lead adsorptivity after modification by hydrogen peroxide than by potassium permanganate, with an increase of ~30% compared with raw alginic acid. To access the potential application of carboxylated alginic acid in cleansing cosmetics, we investigated the lead adsorptivity, conditions of the cosmetics procedure, and cytotoxicity of various concentrations of cleansing cosmetics added to 5% carboxylated alginic acid. The ideal cosmetic concentrations combined with 5% carboxylated alginic acid were 70% for peeling gel, 20% for massage cream, 20% for foam cleansing and 40% for cleansing cream. There was no cytotoxicity in cleansing cosmetics combined with 5% carboxylated alginic acid.

• 대한화학회지
• /
• 제17권1호
• /
• pp.53-59
• /
• 1973

우리나라 영산일 bentonite를 KF, $NH_{4}Cl$등의 염과 혼합하여 $200-500^{\circ}C$로 가열처리하여 수세 건조한 시료의 methylene blue 흡착능을 조사하였다. $NH_{4}Cl$를 혼합하여 처리하였을 경우에는 methylene blue 흡착능이 다소 개선되었다. KF를 혼합하여 처리하였을 경우에는$200-300^{\circ}C$의 처리에서 methylene blue의 흡착능이 원시료의 약1.7배까지 개선되었다. $FeSO_4$ 나 $Na_{2}CO_4$등의 염과 혼합하여 처리하였을 경우에는 오히려 methylene blue 흡착능이 감소되었다.

• 한국환경과학회지
• /
• 제12권7호
• /
• pp.817-824
• /
• 2003

Various kinds of zeolites, such as analcime (ANA), cancrinite (CAN), Na-Pl and sodalite octahydrate (SOD) could be synthesized from Hwangto by hydrothermal reaction in a high-pressure vessel. The adsorption characteristics of Cu(II) and Cd(II) by Hwangto and its synthetic zeolites were investigated using the chemical and electrochemical surface parameters of these adsorbents. The heavy metal adsorptivity among the adsorbents decreased in the following sequences: Na-Pl > SOD > ANA > CAN > Hwangto. This sequence was the same with the values of surface site density (Ns) of these adsorbents and was correlated inversely with the values of pHpzc (pH of the point of zero charge) and the va]ues of K$\_$a2/(int) (intrinsic surface deprotonation constant) of the adsorbents for synthetic zeolites, i.e., the adsorbents with higher values of Ns and with lower values of pHpzc and K$\_$a2/(int) for synthetic zeolites showed higher heavy metal adsorptivity. With increasing pH, the heavy metal adsorptivity increased greatly between pHpzc and pH 6 or 7 because of the steep increase of negatively charged sites for synthetic zeolites, but for Hwangto, it increased broadly because of slow increase of negatively charged sites based on its lower surface sites.

• 분석과학
• /
• 제10권4호
• /
• pp.291-299
• /
• 1997

톱밥의 주성분인 cellulose를 이용하여 cellulose-OH를 cellulose-Cl로 전환시킨 다음 킬레이트 시약인 2,2'-iminodibenzoic acid염을 반응시켜 킬레이트 흡착제인 2,2'-iminodibenzoic acid-cellulose를 합성하였다. 그리고 합성된 흡착제를 이용하여 Pb(II)와 Cu(II)의 흡착성을 연구하였다. 흡착 특성에 대한 실험 결과, pH가 증가할수록 금속 이온의 흡착량이 증가함을 알 수 있었다. 최적 흡착 반응시간은 약 1시간, 흡착능과 회수량은 Cu(II)보다 Pb(II)의 경우가 더 좋음을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제12권2호
• /
• pp.121-126
• /
• 1980

효과적인 저농도 인슈린 방사면역 측정법 확립 및 표지인슈린의 면역학적 환성과 탄소분말에 대한 흡착력의 상관관계를 밝히기 위하여 이들 두 다른 기준에 기초를 둔 두가지의 최적표지 인슈린선정방법을 비교한결과 탄소분말흡착에 의한 방법은 부적당함을 알 수 있었다. 일반적으로 표지인슈린의 방사능, 항체결합능, 탄소분말흡착능등은 서로 일치하지 않았다. 따라서 측정신뢰도를 높이기 위해서는 매 표지때마다 항체결합능으로 최적표지 인슈린을 선정해야 하며 탄소분말 흡착력으로 선정하면 안된다고 본다. 항체결합능에 따라 선정된 표지 인슈린을 써서 대조혈청중의 인슈린량이 정화히 측정되었으며 정온유지시간을 96시간으로 연장함으로써 5 $\mu$U/ml 하의 표준 인슈린투여 량에 대해서도 매우 예리한 응답곡선을 얻을 수 있었다.

• 한국염색가공학회지
• /
• 제17권1호
• /
• pp.20-29
• /
• 2005

Cotton fabric was treated with a reactive anionic agent in order to have anionic sites(-S03-) on it, which made it possible for the fabric to adsorb various cationic materials. In this study, the adsorptivity of various heavy metal ions such as Pb(II), Cd(II), Cr(III), Co(II), Cu(II), Ni (II) and Cr(VI) on the cotton fabrics treated with anionic agent was examined at the various conditions; concentrations of heavy metal ions, pHs of solution, reaction time and temperature. As a result, the adsorptivity of the heavy metal ions on the cotton fabrics treated with the anionic agent was highly increased comparing to that of untreated cotton fabrics. The order of the adsorptivity was as follows: $Pb(II)>Cd(II)>Cu(II)\geqNi(II)\geqCo(II)>Cr(III)\ggCr(VI)$. The adsorption amounts of most heavy metal ions were increased in weak alkaline conditions and were reached to an adsorption equilibrium within 10 ~ 30 minutes. The maximum adsorption ratios of Pb(II) and Cd(II) were respectively 99% and 80% of the initial concentration of heavy metal ions. Therefore the anionized cotton fabrics seem to be utilized as an adsorption fabrics for the removal of heavy metal ions in the waste water.