• 산업기술연구
• /
• 제21권B호
• /
• pp.133-139
• /
• 2001

Generally $PbTiO_3$ is manufactured in a form of thin films which is useful for the application of infrared sensors and non-volatile memory devices. Moreover $PbTiO_3$ has a characteristic of adsorption for organic acid as well as electronic property. Organic acid adsorption properties of $PbTiO_3$ powder prepared by sol-gel method was compared with the powder purchased from Aldrich Co. Crystallization and particle size of $PbTiO_3$ are influenced by process variables, such as dilution of sol solution, catalysis, calcination temperature, calcination time, etc. As the size of $PbTiO_3$ power decreased until several nanometers, adsorption of acetic acid and formic acid was increased 1.5-fold and 1.2-fold respectively.

• Korean Chemical Engineering Research
• /
• 제52권6호
• /
• pp.781-788
• /
• 2014

Polyaniline modified graphene oxide (PANI/GO) composites were synthesized by dilute polymerization technique and were characterized by Fourier transformed infrared spectroscopy (FTIR), Raman spectroscopy, and scanning electron microscopy (SEM). The characterization results indicated that polyaniline molecules were successfully grafted on GO surfaces. The application of PANI/GO composites to the adsorption of heavy metals from aqueous solutions was investigated under ambient conditions. The maximum adsorption capacities of Co(II), Ni(II), Pb(II) and U(VI) ions on PANI/GO composites calculated from Langmuir models are 22.28, 25.67, 65.40 and 1552.31 mg/g, respectively. The excellent adsorption capacity suggests that PANI/GO composites can be applied as a promising adsorbent in heavy metal pollution cleanup in environmental pollution management.

• 한국농공학회지
• /
• 제40권4호
• /
• pp.77-84
• /
• 1998

Adsorption and leaching characteristics of the artificial soils produced from water and wastewater treatment sludges were examined. The batch adsorption test and TCLP leaching test were used, and constituents of interest were heavy metals and nutrients. As, Cr, Cu, Pb, and Cd were analyzed for metals, and nitrogen and phosphorus were analyzed for nutrients. All the artificial soils showed strong adsorption and low leaching for the heavy metals, which implies that the artificial soils may not be hazardous to the environment due to heavy metals and even they can be utilized effectively to remove metals in solution like mine and industrial wastewaters. This is quite promising result because in most case heavy metals are the most concern in the application of sludge product to the farmland. For the nutrients, generally, artificial soils showed high adsorption and low leaching except artificial soil from wastewater sludge produced by low temperature firing. The artificial soils produced from water treatment sludge were active in adsorbing nutrients and showed low leaching that they can be practically used to remove nutrients in advanced treatment process of the wastewater. The artificial soils produced from wastewater treatment sludge were less active in adsorbing nutrients and showed high teaching. However, they could be used usefully if applied properly to the plant growing because of their fertilizing effect. Based on the test results, overall, the artificial soils were thought to be not hazardous to the environment and they could be more useful if applied properly.

• 대한화학회지
• /
• 제22권2호
• /
• pp.78-85
• /
• 1978

이 論文에서는 著者들이 앞서 發展시킨 多分子層物理吸着理論을 修正하여 새로운 吸着理論을 提案하였다. 이 새로운 理論을 여러가지 adsorbent-adsorbate 系에 適用시켜 본 결과 Type Ⅱ와 Type Ⅲ 吸着의 경우에는 理論置와 實驗置가 잘 一致하였다. 뿐만 아니라 이미 발표한 理論으로써는 설명할 수 없었던 Type Ⅰ 吸着等溫式도 새로운 理論으로는 說明할 수 있었다. 이 理論에 包含되어 있는 두 parameter q/q1과 a는 吸着熱과 어떤 關聯性이 있는 것으로 推測된다.

• 한국염색가공학회지
• /
• 제30권1호
• /
• pp.20-28
• /
• 2018

The near infrared ray camouflage fabric has a near infrared ray reluctance similar to the surrounding environment and has a camouflage effect on the surrounding environment. Synthetic fibers used in military uniforms are difficult to have gastrointestinal function as general commercial dyes, unlike cellulose fibers, which use some commercial vat dyes to impart infrared gastrointestinal function. In this study, we optimized the adsorption pH, temperature and time for NIR dye application for polyester fabrics, and established the optimum concentration for the evaluation of adsorption build-up characteristics. In addition, it is difficult to adsorb it since the polyester material has a dense crystal structure and the NIR dye is bulky. Therefore, a swelling agent used for dyeing meta-aramid fibers with high Tg and high crystallinity was introduced as a separate preparation to increase the affinity to polyester, which is a hydrophobic fiber, to thereby obtain an excellent adsorption rate. As a result of comparing before and after using swelling agent, the adsorption rate difference was 10 times or more when compared with before.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.35-40
• /
• 2013

The present study was conducted to investigate the adsorption potential of red mud for fluoride removal. Different operation parameters such as the effect of contact time, initial concentration, pH, competing anions, seawater, adsorbent dose amount, and adsorbent mixture were studied. Nearly 3 hr was required to reach sorption equilibrium. Equilibrium sorption data were described well by Langmuir model and the maximum adsorption capacity of red mud was 5.28 mg/g. The fluoride adsorption at pH 3 was higher than in the pH range 5-9. The presence of anions such as sulfate, nitrate, phosphate, and bicarbonate had no significant effect on fluoride adsorption onto red mud. The fluoride removal by red mud was greater in seawater than deionized water, resulting from the presence of calcium and magnesium ion in seawater. The use of red mud alone was more effective for the removal of fluoride than mixing red mud with other industrial waste such as oyster shells, lime stone, and steel slag. This study showed that red mud has a potential application in the remediation of fluoride contaminated soil and groundwater.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3017-3026
• /
• 2022

The ¹³¹Cs radioisotope with a short half-life time and high average radiation energy can treat the cancer effectively in prostate brachytherapy. The typical ¹³¹Cs production processes have a separation step of the cesium from ¹³¹Ba to obtain a high specific radioactivity. Herein, we suggested a novel ¹³¹Cs separation method based on the Ba²⁺ adsorption of alginate beads. It is necessary to reduce the affinity of alginate beads to cesium ions for a high production yield. The carboxyl group of the alginate beads was replaced by a sulfonate group to reduce the cesium affinity while reinforcing their affinity to barium ions. The modified beads exhibited superior Ba²⁺ adsorption performances to native beads. In the fixed-bed column tests, the saturation time and adsorption capacity could be estimated with the Yoon-Nelson model in various injection flow rates and initial concentrations. In terms of the Cs elution, the modified alginate showed better performance (i.e., an elution over 88%) than the native alginate (i.e., an elution below 10%), indicating that the functional group modification was effective in reducing the affinity to cesium ions. Therefore, the separation of cesium from the barium using the modified alginate is expected to be an additional option to produce ¹³¹Cs.

• Journal of Microbiology
• /
• 제42권3호
• /
• pp.228-232
• /
• 2004

In this paper, we investigated the development of a simplified and rapid primary capture step for the recovery of M13 bacteriophage from particulate-containing feedstock. M13 bacteriophage, carrying an insert, was propagated and subsequently purified by the application of both conventional multiple steps and expanded bed anion exchange chromatography. In the conventional method, precipitation was conducted with PEG/NaCl, and centrifugation was also performed. In the single step expanded bed anion exchange adsorption, UpFront FastLine$\_$TM/20 (20mm i.d.) from UpFront Chromatography was used as the contactor, while 54$m\ell$ (H$\_$o/=15cm) of STREAMLINE DEAE (p=1.2 g/㎤) from Amersham Pharmacia Biotechnology was used as the anion exchanger. The performance of the two methods were evaluated, analysed, and compared. It was demonstrated that the purification of the M13 bacteriophage, using expanded bed anion exchange adsorption, yielded the higher recovery percentage, at 82.86％. The conventional multiple step method yielded the lower recovery percentage, 36.07％. The generic application of this integrated technique has also been assessed.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.119-120
• /
• 2004

A study on the selective adsorption of uranium(VI) from a high concentration of chemical salts has tern peformed to investigate the uranium removal mechanisms and the application conditions of the electrosorption technique using the activated carbon fiber(ACF) as a good conductive electrosorption adsorbent. Electrosorption test were carried out using an electrochemical cell.(omitted)

• 한국지반신소재학회논문집
• /
• 제11권1호
• /
• pp.1-9
• /
• 2012

본 연구에서는 PRE의 반응물질로 음식물 쓰레기 처리과정에서 발생하는 음식물 쓰레기 탄화재(CFW, Carbonized Foods Waste)를 적용하고자 회분석 흡착실험(Batch test)을 실시하였다. 중금속 구리와 아연에 대한 흡착특성 분석을 위해 CFW를 이용한 개별 및 경쟁흡착 특성을 확인하고자 하였다. 개별흡착 실험에서는 Langmuir와 Freundlich 모델에 적용하여 흡착평형을 예측한 결과 Langmuir의 모델에 더 일치하였고 최대흡착량은 구리가 더 많았다. 유사일치반응과 유사이차반응모델을 이용한 흡착물질의 흡착속도를 비교한 결과 아연의 반응속도가 구리보다 빨랐다. CFW를 이용한 중금속 제거는 구리보다 아연이 먼저 제거가 될 것으로 판단된다. 한편 구리와 아연과의 경쟁흡착 비율이 유사하면 아연의 흡착량이 떨어지는 특성을 보였다. 구리용액에 이연을 혼합한 경우, CFW에 구리의 흡착은 86%이고, 아연용액에 구리를 혼합한 경우에는 이연의 흡착이 19%로 나타났다. 따라서, 복합 중금속으로 오염된 지반의 효율적인 오염제거를 위해서는 각 중금속의 정화특성이 고려되어야 할 것으로 판단된다.