• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.125-132
• /
• 2018

We studied a simple approach for synthesis of mesoporous Y(M-Y) from commercial zeolite Y precursors by treating of NaOH with $CH_3(CH_2)_{15}N(Br)(CH_3)_3$ as template. The physicochemical properties of the mesoporous zeolites Y were then analyzed using XRD, nitrogen full-isotherms at 77 K, SEM and TEM. The nitrogen adsorption-desorption analysis showed that surface area and pore diameter of synthesized mesoporous zeolite Y(M-Y) were $1072m^2/g$ and ~3.3 nm, respectively. And M-Y was applied for the removal of $Mn^{2+}$ and $Fe^{2+}$ from aqueous solution. This material, which introduces mesoporosity with zeolite Y character, displayed a superior adsorption capacity than commercial zeolite Y when used as an adsorbent for the removal of $Mn^{2+}$ and $Fe^{2+}$.

• Journal of Environmental Science International
• /
• v.14 no.8
• /
• pp.785-792
• /
• 2005

In order to reduce roadside and indoor air pollution for volatile organic compounds VOC), it may be necessary to apply photocatalyst-coated construction materials. This study evaluated the technical feasibility of the application of $TiO_2$ photocatalysis for the removal of VOC present in roadside or indoor air. The photocatalytic removal of five target VOC was investigated: benzene, toluene, ethyl benzene and o,m,p-xylenes. Variables tested for the current study included ultraviolet(UV) light intensity coating materials, relative humidity (RH), and input concentrations. Prior to performing the parameter tests, adsorption of VOC onto the current experiment was surveyed, and no adsorption was observed. Stronger UV intensity provided higher photocatalytic destruction(PCD) efficiency of the target compounds. For higher humidity, higher PCD efficiency was observed. The PCD efficiency depended on coating material. Contrary to certain previous findings, lower PCD efficiencies were observed for the experimental condition of higher input concentrations. The current findings suggested that the four parameters tested in the present study should be considered for the application of photocatalyst-coated construction materials in cleaning VOC of roadside or indoor air.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.4
• /
• pp.251-256
• /
• 1976

Langmuir adsorption maximum was used as a basis for the estimation of phosphate requirement as related to the application method to a newly reclaimed hilly land. The application rates of phosphate fertilizer were 4 levels corresponding to 5, 10, 20, and 30 percent of the Langmuir adsorption maximum which was determined by the laboratory experiment. The phosphate fertilizer was applied in two different methods of broadcast and band application. Yield of soybean on a newly reclaimed hilly land was greatly affected by the amount of phosphate fertilizer and application method. With the same amount of phosphate fertilizer, the soybean yield in the broadcast was always lower than that in the band application even though the yield in the broadcast increased with the application rate up to the highest level of this experiment. However, the yield in the band application showed steep increase up to 20 percent level and then the yield decreased at the highest level. The yield at the rate of 5 percent with the band application was equal to the yield at the rate of 20 percent with broadcast, and the yield at the rate of 10 percent with band application was higher by 17 percent than that in the highest broadcast rate. When manure was applied at the rate of 1000 kg/10a to the plot of the 10 percent band application, the yield was 14.6 percent higher than the yield of the plot of the 10 percent band application without the manure and was equivalent to the yield of the plot of the 20 percent band application.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.4
• /
• pp.362-377
• /
• 2014

Polycyclic aromatic hydrocarbons (PAHs) have been of particular concern since they are present both in the vapor and particulate phases in ambient air. In this study, a simple method was applied to determine the vapor phase PAHs, and the performance of the new method was evaluated with a conventional method. The simple method was based on adsorption sampling and thermal desorption with GC/MS analysis, which is generally applied to the determination of volatile organic compounds (VOCs) in the air. A combination of Carbotrap (300 mg) and Carbotrap-C (100 mg) sorbents was used as the adsorbent. Target compounds included two rings PAHs such as naphthalene, acenaphthylene, and acenaphthene. Among them, naphthalene was listed as one of the main HAPs together with a number of VOCs in petroleum refining industries in the USA. For comparison purposes, a method based on adsorption sampling and solvent extraction with GC/MS analysis was adopted, which is in principle same as the NIOSH 5515 method. The performance of the adsorption sampling and thermal desorption method was evaluated with respect to repeatabilities, detection limits, linearities, and storage stabilities for target compounds. The analytical repeatabilities of standard samples are all within 20%. Lower detection limits was estimated to be less than 0.1 ppbv. In the results from comparison studies between two methods for real air samples. Although the correlation coefficients were more than 0.9, a systematic difference between the two groups was revealed by the paired t-test (${\alpha}$=0.05). Concentrations of two-rings PAHs determined by adsorption and thermal desorption method consistently higher than those by solvent extraction method. The difference was caused by not only the poor sampling efficiencies of XAD-2 for target PAHs and but also sample losses during the solvent extraction and concentration procedure. This implies that the levels of lower molecular PAHs tend to be underestimated when determined by a conventional PAH method utilizing XAD-2 (and/or PUF) sampling and solvent extraction method. The adsorption sampling and thermal desorption with GC analysis is very simple, rapid, and reliable for lower-molecular weight PAHs. In addition, the method can be used for the measurement of VOCs in the air simultaneously. Therefore, we recommend that the determination of naphthalene, the most volatile PAH, will be better when it is measured by a VOC method instead of a conventional PAH method from a viewpoint of accuracy.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.3
• /
• pp.155-160
• /
• 2015

BACKGROUND: Objective of this study was to investigate adsorption characteristics of $NH_4-N$ to biochar produced from rice hull in respective to mitigation of greenhouse gases. METHODS AND RESULTS: $NH_4-N$ concentration was analyzed by UV spectrophotometer. For adsorption experiment of $NH_4-N$ to biochar, input amount of biochar was varied from 0.4 to 10 g/L with 30 mg/L $NH_4-N$ solution. Its adsorption characteristic was investigated with application of Langmuir isotherm. Adsorption amount and removal rates of $NH_4-N$ were decreased at 53.9% and increased at 20.2% with 10 g/L compared to 0.4 g/L, respectively. The sorption of $NH_4-N$ to biochar produced from rice hull was fitted well by a Langmuir model. The largest adsorption amount of $NH_4-N$ ($q_m$) and binding strength constant (b) were calculated as 0.4980 mg/g, and 0.0249 L/mg, respectively. It was observed that dimensionless constant ($R_L$) was 0.58. CONCLUSION: It was indicated that biochar produced from rice hull is favorably absorbed $NH_4-N$, because this value lie within 0< $R_L$ <1.

• Resources Recycling
• /
• v.13 no.4
• /
• pp.23-31
• /
• 2004

Basic studies have been conducted regarding the attempt of the utilization of waste Undaria pinnatifida as an adsorbent for the adsorption treatment of lead-containing wastewater. Undaria pinnatifida was found to be chiefly composed of hyo-carbonaceous compounds and have a fairly high specific surface area, which suggesting the possibility of its application as a Potential adsorbent. The electrokinetic Potential of Undaria pinnatifida particles was observed to be negatively highest at around pH 8 and the fact that its electrokinetic potentials are negative at the whole pH range supported it might be an efficient adsorbent especially for cationic adsorbates. Under the experimental conditions, $Pb^{2+}$ was found to mostly adsorb onto Undaria pinnatifida within a few minutes and reach the equilibrium in adsorption within ca. 30 minutes. The adsorption of $Pb^{2+}$ was exothermic and explained well by e Freundlich model. Acidic pretreatment of Undaria pinnatifida enhanced its adsorption capacity for $Pb^{2+}$ , however, the reverse was observed for alkaline pretreatment. The formation of organometallic complex between $Pb^{2+}$ and some functional groups on the surface of Undaria pinnatifida was considered to be one of the main drives for adsorption. Finally the adsorbability of$ Pb^{2+}$ was examined to be rather affected by several solution features such as the coexistence of other adsorbate, the variation of ionic strength, and the concentration of complexing agent.

• Journal of the Korean Chemical Society
• /
• v.58 no.2
• /
• pp.205-209
• /
• 2014

Hematite iron oxide (${\alpha}$-$Fe_2O_3$) nanowalls were fabricated on aluminum substrate by a facile solvent-assisted hydrothermal oxidation process. The XRD and EDS patterns indicate that the sample has a rhombohedral phase of hematite $Fe_2O_3$. FE-SEM, TEM, HR-TEM, SA-ED were employed to characterize the resulting materials. $N_2$ adsorption-desorption isotherms was used to study a BET surface area. Their capability of catalytic degradation of titan yellow GR azo dye with air oxygen in aqueous solution over $Fe_2O_3$ catalysts was studied. The result indicates that the as-prepared product has a high catalytic activity, because it has a larger surface area. Langmuir and Freundlich isotherms of adsorption dye on the catalysts surface were investigated and the decomposition of titan yellow GR follows pseudo-first order kinetic.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.38-42
• /
• 2008

The voltammetic behavior of Vitamin B6 (VB6) was studied at a glassy carbon electrode in phosphate buffers using cyclic, linear sweep and differential pulse voltammetry. The oxidation process was shown to be irreversible over the entire pH range studied (4.0-10.0) and was adsorption controlled. The adsorption amount of VB6 on the glassy carbon electrode was examined by chronocoulometry and the value of n, product of transfer coefficient and number of electrons transferred in the rate determining step, was determined from Tafel plot. VB6 was determined by differential pulse voltammetry and the peak current was found linearly with its concentration in the range of 3 10-7-2 10-4 mol L-1. The detection limit was 1 10-7 mol L-1. The procedure was successfully applied for the assay of VB6 in tablets.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.3-10
• /
• 1998

Acid/Base buffer capacity of soil is very important in prediction of contaminant transport for its direct impact on pH change of the system composed of soil-contaminant-water, In this research, diffuse double layer theory as well as two layer electrostatic adsorption model are applied to develop a theoretical model of buffer capacity of soil. Model application procedures are presented as well. Buffer capacity of Georgia kaolinite and Milwhite kaolinite was measured by acid-base titration. Model prediction and experimental results are compared.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.31-36
• /
• 2008

The use of L-carbohydrates and their corresponding nucleosides in medicinal application has greatly increased. For example L-ribose has been much in demand as the starting material for curing hepatitis B. High performance liquid chromatography (HPLC) method was studied for the analysis of ribose and arabinose fractions from ion exchange chromatography (IEC). Dowex Monosphere 99 Ca/320 resin was packed in IEC to separate ribose and arabinose under various operating conditions. $NH_{2}$ and sugar HPLC columns were then used to analyze the fractions from the IEC column. Pulse input method (PIM) was also used to measure adsorption isotherms of ribose and arabinose in the Dowex column and HPLC columns. Experimental results and simulations by ASPEN chromatography were compared with fair agreement.