• 자연과학논문집
• /
• 제8권2호
• /
• pp.169-173
• /
• 1996

사과 과실의 PE필름 포장 저장 중 에틸렌을 제거하여 저장성을 증대시키기 위한 에틸렌흡착제의 사용이 과실의 저장력에 미치는 영향을 조사하고 자 본 시험을 수행하였다. 에틸렌흡착제 처리는 저장 중 경도저하가 현저하게 억제되었고 흡착제양이 많을수록 억제효과가 크게 나타나는 경향을 보였으나 과실의 당함량과 산함량에는 영향이 없었으며, 과실의 에틸렌 발생량과 호흡량이 감소되었다. 에틸렌흡착제의 처리량은 과실 10kg 당 30g 이상이 적당하였다.

• 한국대기환경학회지
• /
• 제21권4호
• /
• pp.431-438
• /
• 2005

In order to apply the photocatalytic decomposition of aromatic VOCs, adsorbent prepared from MSWI fly ash was coated by $TiO_2$ solution to endow with photo-catalytic function. The effects of coating number, existence of light source and the type of $TiO_2$ solution used for coating were examined. Adsorbent coated with amorphous $TiO_2$ solution showed higher adsorptivity than adsorbent coated with crystal $TiO_2$ solution. Without light source, breakthrough curve of photo -catalyst absorbent for VOCs removal was similar to that of absorbent made from MSWI fly ash. On the other hand, breakthrough time was enlarged with light source and total removal efficiency of benzene and toluene was also increased. It can be explained as photo-decomposition effect of $TiO_2$ photo-catalyst. Total removal efficiency of benzene and toluene was increased according to the increase of coating number with light source. It was due to the effect of adsorption and photo reaction of photo-catalytic adsorbent. But total removal efficiency of benzene was lower than that of toluene. Because benzene was removed more effectively than toluene by adsorption, but photo - decomposition effect oi toluene was more high than benzene.

• Korean Chemical Engineering Research
• /
• 제59권2호
• /
• pp.260-268
• /
• 2021

Adsorption is the most promising technology used to adsorb CO2 to reduce its concentration in the atmosphere due to its functional effectiveness. Various porous materials have been extensively synthesized to boost CO2 adsorption efficiency, for example, zeolite. Here, we report the synthesis process of zeolite adsorbent impregnated with amine, combining the benefit of these two substances. We compared conventional heating with microwave-assisted heating by varying concentrations of monoethanolamine in methanol (10% v/v and 40% v/v) as a liquid solution. The results showed that monoethanolamine impregnation helps significantly increase adsorption capacity, where adsorption occurs as a physisorption and not as chemisorption due to the adsorbent's steric hindrance effect. The highest adsorption capacity of 0.3649 mmol CO2 / gram adsorbent was reached by microwave exposure for 10 minutes. This work also reveals that a decrease in CO2 adsorption capacity was observed at a longer exposure period, and it reached a constant 40-minute adsorption rate. Impregnating activated zeolite with 40% monoethanolamine for 10 minutes in addition to microwave exposure (0.8973 mmol CO2 / gram adsorbent) is the maximum adsorption ability achieved.

• 한국환경보건학회지
• /
• 제25권3호
• /
• pp.23-28
• /
• 1999

Phosphate removal through adsorbent, such as activated alumina, powdered aluminum oxide, flyash, blasted furnace slag and other materials, is commonly and widely practiced. The purpose of this study was to improve the removal efficiency of phosphorus in waste sludge earned at seafood processing factories. To investigate the utility and the feasibility of this sludge disposal process, experiment was carried out with a batch process. As a result, phosphate removal appears to increase with increasing adsorbent does, but shows no changes at an adsorbent does over 5g/l. With increasing ratios of initial phosphate concentration to adsorbent does, the amount of removed phosphate is increased while phosphate removal(%) is decreased. Wasted sludge, treated with zinc chloride chemically, represented a better efficiency than the untreated activated sludge and zinc chloride itself, when they reacted with phosphate solution.

• 한국대기환경학회지
• /
• 제21권4호
• /
• pp.471-478
• /
• 2005

The objective of this research is to improve adsorption efficiency of adsorbent made from MSWI (Municipal Solid Waste Incinerator) ny ash by $HNO_3$ activation. The acidity and the basicity were determined by Boehm's method and the surface structure was studied by BET method with N2 adsorption. The adsorption properties were investigated with benzene and MEK (Methylethylketone). $HNO_3$ activation can modify the surface property of an adsorbent such as specific surface area, pore volume, and functional group. According to the results, the specific surface area of the adsorbent was increased from $309.2m^2/g\;to\;553.2 m^2/g$ by activation. Also oxygen-containing functional groups were formed on it.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.48-52
• /
• 2006

A mixed adsorbent prepared by pyrolysing a mixture of carbon and flyash in 1:1 ratio was tested for its deceleration ability for three different classes of dyes, namely Astrazone Blue FRR(C.I. Basic Blue 69), Teflon Blue ANL(C.I. Acid Slue 125) and Verofix Red(Reactive Red 3GL). Equilibrium investigations were carried out at the optimum conditions obtained in the previous studies. The equilibrium data fitted reasonably well to both the Freundlich and Langmuir adsorption models. However the Langmuir model was more appropriate to describe the adsorption behavior of the dyes to the hybrid absorbent system compared with the Freundlich model. The mixed adsorbent cm be an low-cost alternative to activated carbons.

• Carbon letters
• /
• 제9권2호
• /
• pp.97-104
• /
• 2008

In the present study Sisal fiber obtained from the leaves of Agave sisalana has been chosen to validate its viability as an adsorbent for the removal of Nickel from aqueous solutions. The material was also surface modified and its effect on adsorption of Nickel was also studied. Agave sisalana fiber was found to be a cheap and effective adsorbent doing away with the need to activate the material therby reducing processing cost. The equilibrium studies indicated that the adsorption capacity of raw fiber and the surface modified fiber was 8.66 and 9.77 mg/g respectively with the Langmuir isotherm describing the adsorption phenomena better than the Freundlich and Temkin isotherm. The adsorption was found to be exothermic from the thermodynamic studies and the kinetics showed that the adsorption phenomena were second order.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.296-299
• /
• 2001

Data on the oil spill recovery from the water surface by light floating electromagnetic plants using a new magnetic adsorbent are given. The feasibility scope for further oil recovery from such gathered mixtures(oil + adsorbent), reuse of this magnetic adsorbent and its property reclaiming and recycling were shown. The basic conception of the oil spill recovery and efficiency of this method were set forth.

• Bulletin of the Korean Chemical Society
• /
• 제2권2호
• /
• pp.56-59
• /
• 1981

In this paper a further generalization of the theory of multilayer physical adsorption previously developed by the authors is attempted so that the effect of vertical interactions between adsorbent and adsorbate can be explicitly taken into account. In this attempt we have to discard the previously adopted assumption that the molecules in the second layer or above are all in the same physical state. In order to estimate the effect of vertical interactions on the adsorption isotherm the interaction energy between an adsorbed molecule and the adsorbent surface is assumd to vary as $r^{-3}$ where r is the distance that the molecule under consideration is separated from the adsorbent surface. Resulting adsorption isotherm is applied to interpret the adsorption data of tetramethylsilane vapor on iron film and good agreements between observed and calculated values are obtained over wide range of pressure.

• 공업화학
• /
• 제27권1호
• /
• pp.62-67
• /
• 2016

본 연구에서는 정수슬러지를 원료로 사용하여 펠렛형 흡착제를 제조하고 질소흡착법, XRD, XRF 및 암모니아 승온탈착법 등을 사용하여 물리 화학적 특성을 분석하였다. 정수슬러지 유래 펠렛형 흡착제와 첨착활성탄의 암모니아 및 포름알데히드 기체의 흡착 성능을 비교하였다. 정수슬러지로부터 제조된 펠렛형 흡착제는 첨착활성탄보다 표면적과 기공부피는 훨씬 작지만 암모니아를 훨씬 더 많이 흡착할 수 있었다. 이는 정수슬러지로부터 제조된 펠렛형 흡착제 표면에 산점이 훨씬 더 많이 분포해 있어서 화학흡착에 의해 암모니아를 흡착하기 때문이다. 반면에, 산성가스인 포름알데히드 가스 흡착의 경우는 넓은 표면적과 발달된 기공으로 인하여 첨착활성탄의 흡착성능이 정수슬러지로부터 제조된 펠렛형 흡착제에 비해 훨씬 우수하였다.