• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.799-803
• /
• 2002

Partial oxidation of methane has been conducted over $CeO_2$and it has been found that $CeO_2$has an extraordinary catalytic activity in the reaction. Its activity was strongly dependent on the $CH_4/CO_2$ ratio. Total combustion was dominant with stoichiometric feed ratio$(CH_4/O_2=$ 2.0) but partial oxidation was achieved between the $CH_4/O_2$ ration of 3.8 4.3 and the period depended upon the feed composition. The proposed raaction mechanism it that oxygen vacancies in raduced deria are supplied with oxygen molecules from the reactant, and then activate adsorbed oxygen, followed by releasing activated axygen species reacting with methane to produce $H_2$ and CO.

• 반도체디스플레이기술학회지
• /
• 제13권1호
• /
• pp.63-66
• /
• 2014

ZnO is a wide bandgap (3.3 eV) semiconductor with high mobility and good optical transparency. However, off-current characteristics of ZnO thin-film transistor (TFT) need improvements. In this work we studied the variation in ZnO TFT current under different annealing conditions. Annealing usually modifies gas adsorption at grain boundaries of ZnO. When oxygen is adsorbed, electron density decreases due to strong electronegativity of the oxygen, and TFT current decreases as a result. Our experiments showed that current increased after vacuum annealing and decreased after air annealing. We explain that the change of off-current is caused by the desorption and adsorption of oxygen at the grain boundaries.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.315-315
• /
• 2011

The ring formation and electronic properties of furan adsorbed on graphene layers grown on 6H-SiC(0001) has been investigated using atomic force microscopy (AFM), near edge X-ray absorption fine structure (NEXAFS) spectra for the C K-edge, and high resolution photoemission spectroscopy (HRPES). Moreover, we observed that furan molecules adsorbed on graphene could be used for chemical functionalization via the lone pair of electrons on the oxygen group, allowing chemical doping. We also found that furan spontaneously formed rings with one of three different bonding configurations and the electronic properties of the ring formed by furan on graphene can be described using by AFM, NEXAFS and HRPES, respectively.

• Corrosion Science and Technology
• /
• 제5권6호
• /
• pp.206-212
• /
• 2006

The effects of sub-ppm levels of $H_2S$ and the adsorbed water on the atmospheric corrosion of silver were studied with In situ weight balance to study the effect of the adsorbed water on the kinetic behavior and to determine the rate-controlling step, with XPS to analyze the tarnish film, and with calculation of phase equilibrium to predict the stable solid phase, the concentrations of dissolved species ($Ag^-$, $H^+$, $S^{2-}$, $HS^-$) and the equilibrium potentials ($E_{Ag^+/Ag}$, $E_{H^+/H_2}$, $E_{O_2/O^{2-}$). The results of weight measurements showed that oxygen was required for the sulfidation of silver in 100 ppb $H_2S$ and humidified environments enhanced the tarnished rate and oxidizing power. In addition, the rate determining step for tarnishing silver was shown to be changed to transport though the tarnish film.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1185-1194
• /
• 2022

The maintenance of condenser main pipe is the key to achieve film-forming amine maintenance effectiveness. In this work, oxygen content, pH and temperature of the solution were controlled to simulate the condition of condenser main pipe, and magnetite coated carbon steel sample was prepared by pre-oxidization. CAM was used to characterize the hydrophobicity of film formed samples. Hydrophobic film was formed on pre-oxidized carbon steel samples when octadecylamine concentration reaches 20 mg/kg. SEM, EDS, EIS, and PD were used to characterize the influence of octadecylamine concentration on maintenance effectiveness. It was found that the maintenance effectiveness was enhanced and the corrosion rate was suppressed with the increase of octadecylamine concentration. FIB and TEM were used to detect the adsorbed octadecylamine film thickness founding that octadecylamine adsorbed onto the surface of pre-oxidized carbon steel by multi-layer adsorption mechanism.

• 공업화학
• /
• 제2권2호
• /
• pp.127-137
• /
• 1991

고진공계에서의 열탈착실험을 통하여 $MoO_3$ 촉매상에서의 $CH_3OH$ 분해 및 부분산화반응에 관한 연구를 수행하였다. $CH_3OH$는 촉매표면에 methoxy($-OCH_3$)와 수소원자(-H)의 형태로 흡착되어 있다가 흡착수소원자가 methoxy 와 재결합하면서 425 K에서 $CH_3OH$로 탈착하였으며, methoxy로부터 수소원자가 떨어져 나가면서 545 K에서 HCHO가 탈착되었다. 이때 반응에 의해서 생성된 물은 428 K에서 탈착하는 ${\alpha}$-피크와 586 K에서 탈착하는 ${\beta}$-피크를 보였으며, ${\alpha}$-피크는 표면에 형성된 hydroxyl 에 기인하는 탈착피크, ${\beta}$-피크는 methoxy가 수소를 잃으면서 HCHO의 형태로 촉매표면에서 탈착하면서 남긴 표면수소원자와 격자산소가 반응하여 생성된 물에 각각 기인하는 것으로 보였다. 선흡착된 산소원자는 $CH_3OH$의 분해흡착을 촉진시킴으로써 $CH_3OH$의 흡착량을 증가시킨 반면, 선흡착된 물은 분해흡착하여 $CH_3OH$의 흡착점을 점유함으로써 $CH_3OH$의 흡착량을 감소시켰다.

• 공업화학
• /
• 제5권2호
• /
• pp.285-294
• /
• 1994

몇 종류의 담지 금촉매를 통상의 함침법과 공침법에 의하여 제조하였다. 금입자의 크기, 산소의 흡착량, CO와 NO의 흡착특성 그리고 산화환원 특성 등의 조사를 통하여, 금의 첨가효과와 활성점의 생성에 관해 연구하였다. 함침법에 의한 촉매의 금입자들은 30~100nm 정도로 크고 균일하지 않았으나, 공침법에 의한 촉매는 약 4nm인 초미립자의 상태로 매우 균일하게 분산되어 있었다 $Au/Al_2O_3$촉매에 있어서, 불활성인 $Al_2O_3$에 금의 첨가로 $N_2O$의 분해가 일어났으며, CO의 비가역흡착은 일어나지 않았으나, $O_2$는 원자상으로 비가역흡착하였다. 산소의 흡착점은 활성점이 금입자 표면에 존재하는 원자 전부가 아니라 반구형인 금입자와 담체의 경계면 주위에 한정된 활성점이었다. 저온의 $Al_2O_3$에서는 CO의 가역흡착과 비가역흡착이 일어났지만, 소량의 금의 첨가에 의하여 어느 쪽의 흡착도 약해졌다. $Au/Co_3O_4$촉매에서 CO에 대한 친화성은 $Co_3O_4$에 비해 크게 감소하였다. 환원과정에서는 금의 첨가효과가 보이지 않고, 재산화과정에서 금의 첨가효과가 뚜렷하게 나타나, 첨가된 금은 환원상태의 코발트의 재산화를 촉진시켰다.

• 한국재료학회지
• /
• 제2권4호
• /
• pp.279-284
• /
• 1992

고분해능 전자에너지손실 및 자외선광전자 분광법을 사용하여 단결정 NbC(111)면의 산소횹착을 연구하였다. NbC(111) 표면에는 산소가 원자 및 분자상태로 흡착되었다. 산소원자는 3-fold hollow site에 흡착되며 진동수는 548c$m^{-1}$이었다. 산소분자의 신축진동수는 968c$m^{-1}$로서 기체상태인 산소분자의 진동수보다 크게 낮았으며, 산소분자의 흡착으로 일함수가 증가하였다. 이는 NbC(111) 기판으로부터 산소분자의 2p${pi}_g$ 궤도로 전자가 이동하였음을 보여주는 증거이다.

• 한국응용과학기술학회지
• /
• 제24권1호
• /
• pp.67-73
• /
• 2007

Methane combustion over perovskite catalysts was investigated. For the preparation of catalysts, Co, Mn, Fe, and Ni were used as B-site components of the perovskite catalysts $(ABO_3)$ and La was used as A-site component. The effect of calcination temperature on methane combustion and perovskite structure was also investigated. The structure of perovskites, surface area, and adsorbed oxygen species were tested with XRD, BET apparatus, and $O_2-TPD$, respectively. The formation of perovskite structure was affected by the calcination temperature. The catalyst desorbing oxygen at a lower temperature showed better activity for the methane combustion, therefore, the oxygen species desorbing at lower temperatures is responsible for the methane combustion.

• Bulletin of the Korean Chemical Society
• /
• 제15권8호
• /
• pp.616-622
• /
• 1994

The oxidation of carbon monoxide by gaseous oxygen in the presence of a powdered $Nd_{1-x}Sr_xCoO_{3-y}$ solid solution as a catalyst has been investigated in the temperature range from 150$^{\circ}$C to 300$^{\circ}$C under various CO and $O_2$ partial pressures. The site of Sr substitution, nonstoichiometry, structure, and microstructure were studied by means of powder X-ray diffraction and infrared spectroscopy. The electrical conductivity of the solid solution has been measured at 300$^{\circ}$C under various CO and $O_2$ partial pressures. The oxidation rates have been correlated with 1.5-and 1.2-order kinetics with and without a $CO_2$ trap, respectively; first-and 0.7 order with respect to CO and 0.5-order to $O_2$. For the above reaction temperature range, the activation energy is in the range from 0.25 to 0.35 eV/mol. From the infrared spectroscopic, conductivity and kinetic data, CO appears essentially to be adsorbed on the lattice oxygens of the catalyst, while $O_2$ adsorbs as ions on the oxygen vacancies formed by Sr substitution. The oxygen vacancy mechanism of the CO oxidation and the main defect of $Nd_{1-x}Sr_xCoO_{3-y}$ solid solution are supported and suggested from the agreement between IR data, conductivities, and kinetic data.