• Journal of Periodontal and Implant Science
• /
• v.48 no.1
• /
• pp.3-11
• /
• 2018

Purpose: This study utilized a strong quasi-experimental design to test the hypothesis that the implementation of a policy to expand dental care services resulted in an increase in the usage of dental outpatient services. Methods: A total of 45,650,000 subjects with diagnoses of gingivitis or advanced periodontitis who received dental scaling were selected and examined, utilizing National Health Insurance claims data from July 2010 through November 2015. We performed a segmented regression analysis of the interrupted time-series to analyze the time-series trend in dental costs before and after the policy implementation, and assessed immediate changes in dental costs. Results: After the policy change was implemented, a statistically significant 18% increase occurred in the observed total dental cost per patient, after adjustment for age, sex, and residence area. In addition, the dental costs of outpatient gingivitis treatment increased immediately by almost 47%, compared with a 15% increase in treatment costs for advanced periodontitis outpatients. This policy effect appears to be sustainable. Conclusions: The introduction of the new policy positively impacted the immediate and long-term outpatient utilization of dental scaling treatment in South Korea. While the policy was intended to entice patients to prevent periodontal disease, thus benefiting the insurance system, our results showed that the policy also increased treatment accessibility for potential periodontal disease patients and may improve long-term periodontal health in the South Korean population.

• KDI Journal of Economic Policy
• /
• v.33 no.4
• /
• pp.143-177
• /
• 2011

Upon selecting preferred bidder in Public-Private Partnership projects, multi-dimensional procurement auction, where price factor and non-price factor are evaluated, is used. This paper tries to analyze bidding data in BTO road projects. It is shown that a winner tends to get higher score in bidding evaluation, which is partly due to increase in base score as well as fiercer competition among bidders. It turns out that score margin in non-price factor was determinant in selecting winner. Also, there was no competition when the level of bonus point was set too high. For price factor, it costs 730 million KRW per score in construction subsidy by government, while it costs 2.43 billion KRW per score in toll revenue. For non-price factor, it was estimated to cost 2.30 billion KRW. Based on the results, it was suggested that we should have appropriate level of bonus point for first initiator, change in scoring rule in construction subsidy part, adjustment of base score in evaluation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.771-780
• /
• 2013

Inspection system which was performed in the past selected the final winning bidder by separating Pre-Qualification, the basic design evaluation and price evaluation. However, turnkey and alternative bidding construction has selected way to determine the successful bidder as the best design and the most low cost method, comprehensive evaluation method (bid price adjustment, design score adjustments, weights standard), the best design and the fixed amount method from january 1, 2010 to the present. Due to these institutional problems, orders institutions were often a way to determine the successful bidder to apply differently for identical or similar construction. Therefore this study winning bidder selection criteria through analysis of construction the number and construction order performance, order performance by work division and institutional orders, the weights bidder order performance and orders status of turnkey alternative tendering construction to civil part performed in domestic.

• Journal of Applied Reliability
• /
• v.16 no.1
• /
• pp.32-40
• /
• 2016

Purpose: The purpose of this study is to analyze the effect of sampling points on accuracy of storage reliability estimation for one-shot systems by assuming a weibull distribution as a storage reliability distribution. Also propose method for determining of sampling points for increase the accuracy of reliability estimation. Methods: Weibull distribution was divided into three sections for confirming the possible to estimate the parameters of the weibull distribution only some section's sample. Generate quantal response data for failure data. And performed parameter estimation with quantal response data. Results: If reduce sample point interval of 1 section, increase the accuracy of reliability estimation although sampling only section 1. Even reduce total number of sampling point, reducing sampling time interval of the 1 zone improve the accuracy of reliability estimation. Conclusion: Method to increase the accuracy of reliability estimation is increasing number of sampling and the sampling points. But apply this method to One-shot system is difficult because test cost of one-shot system is expensive. So propose method of accuracy of storage reliability estimation of one-shot system by adjustment of the sampling point. And by dividing the section it could reduce the total sampling point.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.166-174
• /
• 2015

A direct demand model requires relatively little analysis time and incurs a low cost. It is also known to be useful for the preliminary screening of promising configurations or concepts. This study reviews direct demand models of 12 existing urban railways using demographic data based on a block group level which is approximately 1/24 of a traditional zone area. However, direct demand models are limited. Therefore, a new approach is suggested. The proposed method is based on a field study and an empirical analysis. The study finds factors that affect ridership at the station level. As a case study, the proposed approach is tested using 54 light railway transit stations. The results of this empirical study demonstrate its applicability to improve the error rates of the predicted ridership at the station level.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.285-291
• /
• 2004

GPS photogrammetry or the GPS/INS photogrammetry, which are based on the direct measurement of the projection centers and attitude at the moment of camera exposure time through loading the GPS receiver or INS in aircraft. Both photogrammetric methods can offer us to acquire the exterior orientation parameters with only minimum ground control points, even the ground control process could be completely skipped. Consequently, we can drastically reduce the time and cost for the mapping process. In this thesis, test flight was conducted in Suwon area to evaluate the performance of accuracy and efficiency through the analysis of results among the three photogrammetric methods, that is, traditional photogrammetry, GPS photogrammetry and GPS/INS photogrammetry. Test results shows that a large variety of advantages of GPS photogrammetry and GPS/INS photogrammetry against traditional photogrammetry is to be verified. Especially, the number of ground control points for the exterior orientation could be saved more than 70～80%, respectively.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.6
• /
• pp.1-8
• /
• 2017

The purpose of this study was to provide basic data for development of environmental design technology for greenhouses constructed in reclaimed lands. We analyzed the climatic conditions around seven major reclaimed land areas in Korea, which have a plan to install advanced horticultural complexes. The characteristics of heating load through the thermal environment measurement of the greenhouse in Saemangeum were analyzed. The part to be applied to the environmental design of the greenhouses in reclaimed lands were reviewed. The overall heat transfer coefficient of the experimental greenhouse with the aluminum screen and multi-layer thermal curtain averaged $3.79W/m^2^{\circ}C$. It represents a 44 % heat savings rate compared with plastic greenhouses with a single covering, which was significantly lower than that of the common greenhouses with 2-layer thermal curtains. This is because the experimental greenhouse was installed on reclaimed land and wind was stronger than the inland area. Among the total heating load, the transmission heat loss accounted for 96.4~99.9 %, and the infiltration loss and the ground heat exchange were low. Therefore, it is necessary to take countermeasures to minimize the transmission heat loss for greenhouses constructed in reclaimed lands. As the reclaimed land is located on the seaside, the wind is stronger than the inland area, and the fog is frequent. Especially, Saemangeum area has 2.6 times stronger wind speed and 3.4 times longer fog duration than the inland area. In designing the heating systems for greenhouses in reclaimed lands, it is considered that the maximum heating load should be calculated by applying the wind coefficient larger than the inland area. It is reasonable to estimate the operation cost of the heating system by applying the adjustment factor 10 % larger than the average in calculating the seasonal heating load.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1907-1917
• /
• 2010

It is much needed research for ocean scientists to implement a digitizing system that effectively extracts and digitializes sea level records accumulated from the past. The main difficulty of such a system is huge anount of data to be processed. In this paper, we implement a digitizing system to handle such mass-data of sea level records. This system consists of a pre-process step, a digitizing step and a post-process step. In pre-process step, the system adjusts skewnesses of scanned images and normalizes the size of images automatically. Then, it extracts a graph area from images and thins the graph area in digitizing step. Finally, in the post-process step, the system tests the reliability. It is cost-effective and labour-reducing software for scientists not wasting their time to such boring manual digitizing jobs.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.11
• /
• pp.29-39
• /
• 2019

As mobile robot applications increase in real life, the need of low cost autonomous driving are gradually increasing. We propose a novel vision-based real-time lane detection and tracking system that supports autonomous driving of mobile robots in constrained tracks which are designed considering indoor driving conditions of mobile robots. Considering the processing of lanes with various shapes and the pre-adjustment of operation parameters, the system structure with multi-operation modes are designed. In parameter tuning mode, thresholds of the color filter is dynamically adjusted based on the geometric property of the lane thickness. And in the unstable input mode of curved tracks and the stable input mode of straight tracks, lane feature pixels are adaptively extracted based on the geometric and temporal characteristics of the lanes and the lane model is fitted using the least-squared method. The track centerline is calculated using lane models and the motion model is simplified and tracked by a linear Kalman filter. In the driving experiments, it was confirmed that even in low-performance robot configurations, real-time processing produces the accurate autonomous driving in the constrained track.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1676-1681
• /
• 2020

Collecting and managing information on all-round activities of students not only helps to improve school life adjustment and satisfaction, but also serves as the basis for preventive student support for academic warnings or dropouts. Therefore, in guiding students, it is necessary to integrate various information of students and provide them to the instructor quickly and accurately. In this study, in the special environment of an organization in which student information is scattered in several systems, a system model is proposed that not only integrates and provides student information to instructors quickly, but also saves cost and effort. And we tested the effectiveness of the proposed system model by developing a simple web page. As a result, it was confirmed that the proposed model provided information necessary for student guidance in an integrated, multifaceted, and instantaneous manner, and that user satisfaction was improved through an improved UI.