• 한국전자파학회논문지
• /
• 제10권2호
• /
• pp.187-195
• /
• 1999

스펙트럼 분석기의 2차 l$\infty$al oscillator(L이 신호인 3.2 GHz에서 동작하는 직렬 례환형 유전체 공진 발진기 를 설계 및 제작하였다. 트랜지스터의 소신호 산란계수를 이용하여 발진기를 설계하였으며, 유전체 공진기와 마이크로스트립 선로 사이의 결합계수로 인한 유전체 공진기의 반사계수를 조정하여 우수한 저잡음 특성을 얻었다. 제작된 유전체 공진 발진기의 측정 결과 출력전력은 10.50 dBm. 위상잡음은 10 kHz의 오프셋에서 -116 dBc/Hz. 고조파특성은 19.33 dBc를 얻었다.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.281-289
• /
• 2020

Environmental fate of ionizable organic pollutants such as perfluoroalkyl acids (PFAAs) are of increasing interest but has not been well understood because of uncertain values for parameters related with atmospheric interphase partitioning behavior. In the present study, not only the values for air-water partition coefficient (K_AW) and dissociation constant (pKa) of PFAAs were induced by adjusting to in situ measurements of air-water distribution coefficient between vapor phase and rainwater but also gas-particle partition coefficients were also estimated using three-phase partitioning model of ionizable organic pollutants, in situ measurements of PFAAs in aerosol and air vapor phase, and obtained parameter values. The pKa values of PFAAs we obtained were close to the minimum values suggested in literature except for perfluorooctane sulfonic acids, and COSMOtherm-modeled K_AW values were assessed to more appropriate among suggested values. When applying parameter values we obtained, it was predicted that air particle-associated fate and transport of PFAAs could be negligible and PFAAs could distribute ubiquitously along the transection from urban to rural region by pH-dependent phase transfer in air. Our study is expected to have some implications in prediction of the environmental redistribution of other ionizable organic compounds.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.25-28
• /
• 2017

Semiconductor equipment manufacturers desire to enhance efficiency of Sub Fab to increase semiconductor productivity. For this reason, Sub Fab equipment manufacturers are developing Integrated System that combined modules with multiple facilities. Integrated System is required to apply Mount Leveler of Wedge Type in compliance with weight increase compared with existing single equipment and product shape change. This thesis analyzes main design variables of components of Wedge Mount Leveler and carries out structure analysis using ANSYS, finite element analysis program Analysis shows that main design variables of components of Wedge Mount Leveler has self-locking condition by friction force of Wedge and adjusting bolt. Each friction force hinges upon Wedge angle and Friction Coefficient of contact surface and upon the thread angle and Friction Coefficient of contact surface. Also, as a result of carrying out structure analysis of Wedge Mount Leveler, deflection and stress appears in different depending on the height of the level.

• 한국전기전자재료학회논문지
• /
• 제32권3호
• /
• pp.219-222
• /
• 2019

In this study, we fabricated plate-type shunt resistors with thermal stability by parallelly connecting metal alloy plates with positive temperature coefficient of resistance (TCR) and carbon nanotube (CNT) plates with negative TCR. The metal alloy plates, which were prepared by alloying Cu and Mn with a composition of 91 wt% of Cu and 9 wt% of Mn, showed around $800ppm/^{\circ}C$ of TCR, and the CNT plates prepared from the CNT solution by using the vacuum filtration method showed around $-800ppm/^{\circ}C$ of TCR. The shunt resistor that was fabricated by stacking metal alloy plates and CNT plates in this work showed about $46.93ppm/^{\circ}C$ of TCR. Therefore, we conclude that a shunt resistor with low TCR can be realized by simply adjusting the TCR of the metal alloy only, because the TCR of the CNT plate has an identical value.

• 대한디지털의료영상학회논문지
• /
• 제9권1호
• /
• pp.21-30
• /
• 2007

영상 획득과 재구성 방법에 따라 CT 감약계수는 다양성을 보이고 관심 영역의 노이즈는 정밀도에 영향을 준다. 인체에서 간 실질조직과 위장의 물의 CT 감약계수와 노이즈를 커널에 따라 측정하였다. 다중채널 CT 스캐너를 이용하여 복부를 스캔 하였고, 커널은 B10 (very smooth), B20 (smooth), B30 (medium smooth), B40 (medium), B50 (medium sharp), B60 (sharp), B70 (very sharp), B80 (ultra sharp)으로 재구성하여 간의 실질 조직과 물이 들어 있는 위장 부위를 ROI 기능을 이용하여 평균의 CT감약계수와 표준편차인 노이즈를 측정하여 영상을 비교하였다. 간의 실질 조직에서 CT감약계수는 커널에 따라 60.4에서 69.2 HU사이에서 분포하여 차이가 없었으나, 노이즈는 커널(7.6$\sim$63.8 HU)이 높아질수록 증가하였다. 물의 CT감약계수는 -2.2 HU에서 0.8 HU사이에서 측정되었고, 노이즈는 커널(10.1$\sim$82.4 HU)이 높아질수록 증가하였다. 영상의 질을 높이기 위해서는 검사 부위에 따라 노이즈를 감소하기 위해 적절한 커널을 선택하여 CT 검사를 하여야 한다.

• 콘크리트학회논문집
• /
• 제22권2호
• /
• pp.255-262
• /
• 2010

이 연구에서는 폐석분 활용 경량골재 콘크리트의 염화물 확산에 대한 기초자료를 제공하고자 하였다. 이에 콘크리트의 골재를 부순골재(CG), 폐석분을 활용한 단일 입도의 비조립형 경량골재(SLG), 연속 입도의 비조립형 경량 골재(CLG), 물결합재비 0.4, 0.5, 0.6, 결합재 FA, BFS로 실험을 실시하였다. 염화물 확산 계수는 NT BUILD 492준하여 시험 후 산출하였으며 SLG와 CLG콘크리트의 확산계수는 CG콘크리트보다 다소 크게 나타났으나 큰 차이는 없었다. 또한 염화물 확산계수는 물결합재비에 의한 영향이 크며 물결합재비가 낮을수록 감소하는 것으로 나타났고 혼화재 치환은 FA15%의 경우 물결합재비 0.4에서만 감소를 나타내는데 비해 FA10 + BFS20% 모든 수준에서 감소하는 것으로 나타나 더 적합한 것으로 사료된다. 경량골재 콘크리트의 염화물 확산을 분석한 결과, 폐석분 활용 경량골재 콘크리트가 CG콘크리트에 비하여 염화물 확산 계수가 크지만 큰 차이는 없으며 물결합재비 및 혼화재 치환으로 저항성을 향상 시킬 수 있다. 또한 경량골재에 대해 강도에 따른 염화물 확산 계수를 추정 할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1838-1842
• /
• 2004

Gain and phase margins of a first order plus delayed time (FOPDT) process controlled by generalized predictive controller (GPC) are related to the control parameters ${\lambda}$ (control move suppression parameter) and ${\alpha}$ (smoothing filter coefficient) and the normalized delay of the process. Variation ranges of gain and phase margins are determined. It is shown that the margins cannot be assigned independently for a wide range of variation and the range is narrowing by increase of the normalized delay of the process. And finally curves are given to use for adjustment of the controller parameters in order to obtain a specific pair of gain and phase margins.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.357-362
• /
• 1996

LOFT LBLOCA test, LP-02-6 was analyzed using RELAP5/MOD3.2. It has a distinguished thermal-hydraulic phenomenon of a positive bottom-up core flow in tile blowdown phase. A modified nodalization which is based on that used in LP-LB-1 calculation by Lubbesmeyer was used in the calculation. RELAP5/MOD3.2 predicted overall system hydraulic behavior relatively well. However, the bottom-up quenching in the middle part of the core was not predicted sufficiently. It was demonstrated also that the peak cladding temperature can be predicted well by adjusting a discharge coefficient. But more improvements are needed in order to apply this code to actual plants with less user dependency.

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.222-228
• /
• 2003

A reliable tool wear monitoring technique is the one of important aspects for achieving an integrated and self-adjusting manufacturing system. In this paper, a tool wear estimation approach for turning is proposed. This approach uses the model of cutting force, spindle displacement and their relation. A series of experiments were conducted by designing experimental techniques to determine the relationship between flank wear and cutting force coefficient as well as cutting parameters such as cutting speed, depth of cut and feed. The proposed model performance has shown that the spindle displacement model predicts tool wear with high accuracy and spindle displacement signal is possible to replace cutting force signal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.459-464
• /
• 2001

A reliable tool wear monitoring technique is the one of important aspects for achieving an integrated and self-adjusting manufacturing system. In this paper, a tool wear estimation approach for turning is proposed. This approach uses the model of cutting force, spindle displacement and their relation. A series of experiments were conducted by designing experimental techniques to determine the relationship between flank wear and cutting force coefficient as well as cutting parameters such as cutting speed, depth of cut and feed. The proposed model performance has shown that the spindle displacement model predicts tool wear with high accuracy and spindle displacement signal is possible to replace cutting force signal.