• 품질경영학회지
• /
• 제46권2호
• /
• pp.301-310
• /
• 2018

Purpose: The purpose of this study is to investigate the effect of work intensity on fit factor and affective quality of the dustproof Background: Among the victims who suffer pneumoconiosis due to the inhalation of toxic substances or the lack of oxygen during the work, the proportion of the victims is larger than the other causes. Wearing a respirator may prevent pneumoconiosis, but it can be hazardous to workers because of the leakage through filters, cartridges, exhaust valves, broken parts, and face-to-face contact. Despite leakage through the contact area between the mask and the face has various causes such as the wearer's activity, sweat accumulation, facial shape, etc., There is a lack of relevant research and regulation compared to developed countries that have already institutionalized the law 30 years ago and give the right to sell through a test Method: The work intensity was adjusted by walking or running at 6km/h and 11km/h on the treadmill, and tasks were defined with reference to the test procedure and the exercise sequence applied in the face leakage test of the dustproof mask. And fit factor was measured objectively using 'Respirator Fit Tester 8038' which measures fit factor calculated by dividing the number of dust present outside the mask by inside the mask. In addition, affective quality was classified by the ease of use, ease of breathing, and ease of wearing, and was measured using the 5-point likert scale questionnaire. Results: There was a significant difference in fit factor, ease of breathing, and wearing convenience according to work intensity and no significant difference in ease of use(${\alpha}=0.01$). And when the work intensity was high, fit factor, ease of breathing, and wearing convenience were all lower than when the work intensity was low. Conclusion: In Korea, it is necessary to consider consideration of the work intensity when testing the leakage rate of the face part for safety certification of the respiratory protective equipment, When developing a mask, it should be possible to maintain high adhesion even under intense, active situation and high temperature conditions by selecting materials, improving the wearing style, and expanding the adjustable range.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3626-3632
• /
• 2010

반도체 소자 검사장비 핸들러는 주 검사장비인 테스터에 반도체 소자를 개별 또는 그룹으로 이송하여 테스트 환경을 만들어주고 검사가 끝나면 검사결과를 테스터로부터 전송받아 양품과 불량품으로 분류해주는 장비이다. 본 논문에서는 기존에 개발된 핸들러의 챔버 내부 온도 분포의 균일성을 개선하기 위하여, 챔버 덕트의 조절셔터 설치, Heater와 Match Plate 중심위치의 정렬, Match Plate Base의 Hole 크기 및 형상 변경, 온도 센서로 향하는 공기의 흐름이 원활할 수 있도록 핀에 직경 2 mm의 구멍 설치 등의 설계 변경을 하였다. 설계 변경의 효과를 확인하기 위하여, 기존 장비와 설계 개선된 장비 내부의 온도 분포를 32개의 온도 센서를 사용하여 측정하였다. 그 결과 기존 챔버내부 온도 분포는 $87.1{\sim}91.5^{\circ}C$ ($90{\pm}2.9^{\circ}C$)이었으나 개선된 챔버 내부 온도 분포는 $89.5{\sim}90.8^{\circ}C$ ($90{\pm}0.8^{\circ}C$)으로 15분 이상 지속 가능하여 챔버 내부의 온도 분포 균일성이 크게 개선되었음을 알 수 있었다. 또한 설계 변경 이후의 온도 분포는 $90{\pm}1^{\circ}C$의 범위 내에서 10분 이상을 유지하는 목표를 달성하였음을 확인하였다.

• The Journal of Korean Physical Therapy
• /
• 제17권4호
• /
• pp.537-557
• /
• 2005

The purpose of this study was to investigate the effect of pelvic traction and muscle energy technique(MET) for hemiplegic patients on static standing balance. The scale for static standing balance is measured by using mean balance(%), frequence(Hz), sway area($mm^2$), sway path(mm), max sway velocity(mm/s), ant/post sway angle($^{\circ}$), lateral sway angle($^{\circ}$), sway number, change of pelvic height is measured in relation to the height of ASIS and PSIS. The subjects of this study were thirty hemiplegic patients: 15men and 15 women, with an average ages of 50.80 years. The thirty subjects were divided into 3 group of 10 at random ; ten subjects had pelvic traction after bobath therapy (the pelvic traction group), ten subjects had muscle energy technique after bobath therapy (the MET group), and ten subjects had only bobath therapy (the control group). Static standing balance was measured using BPM (balance performance monitor; data print software version 5.3), pelvic height was measured using height measuring with an adjustable horizontal arm. In order to assure the statistical significant of the result, an one-way ANOVA, the paired t-test, and a person's correlation were applied at the.05 level of significance. The results of this study were as follows: 1) The change in pelvic height were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 2) The change in affected and non-affected on weight bearing were not statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p>.05). 3) The change in frequency were statistically significant between the MET group, the control group and the pelvic traction group on pre-treatment and post-treatment(p<.05). 4) The change in sway area were statistically significant between the MET group, the control group and the pelvic traction group on pre-treatment and post-treatment(p<.05). 5) The change in sway pa1h were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 6) The change in max sway velocity were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 7) The change in ant/post sway angle were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 8) The change in lateral sway angle were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 9) The change in sway number were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). In conclusion, there was a difference between the experimental group and the control group. In the future, we have to study continuously about pelvic traction and muscle energy technique in hemiplegic patients.

• 대한예방한의학회지
• /
• 제4권2호
• /
• pp.273-284
• /
• 2000

The objective of this study consists on clarifying what factors are influenced upon skin care behavior using fender's Health Promotion Model, widely used to anticipate practices of health care behavior for women with keen interest in skin care and then manifesting their correlations from July 1 to August 22, 1998, on 159 women interested in skin care. A subvariable included practice of skin care behavior and independent variables include general characteristics, health fitness, the level of agreement with the advantages of the perceived skin care behavior, the level of cognition of the necessity for skin care behavior The data collected processed with ANOVA and multiple regression analysis to clarify what factors among other independent variables have the most powerful effects upon skin care. The resultant findings were revealed, as follows : 1. In health care behavior among skin care behavior,'full ingestion of water' represented the highest value by 3.45 points, 2. The testees of this study had for the most part a higher level of cognition for the necessity for skin care behavior than for practice of skin care behavior. The more points they have for cognition of the necessity for skin care behavior, the more points they present for practice of skin care behavior. 3. From the perspective of the relationship between sociometic factors on the testees and their skin care behavior, the higher level married women were on (p<0.05) and the more points they have for economic status, the higher points were reflected . 4. The correlations between the testees' recognition or perception factors and points for practice of skin health state showed the higher points than the group who thought that they did not know their own skin health state (p<0.05). The higher the points of skin care fitness (p<0.0001), the higher the points of self-awareness (p<0.0001) 5. The factors that had the most powerful influence upon cognition and practice of women's skin care behavior were found, with statistical significance, to be adjustable factors such as age, smoking, drinking habit, economic status, etc. and points of cognition of the necessity for skin care behavior.

• 대한환경공학회지
• /
• 제35권5호
• /
• pp.363-370
• /
• 2013

소수력발전은 하수처리장 에너지 자립을 위한 효과적인 대안이다. 본 연구는 유량변동이 크고 유효낙차가 낮은 중소형 하수처리장(기흥레스피아) 적용을 위해 피치조절형 세미카플란(semi-kaplan) 마이크로수력발전의 적용 타당성을 평가하였다. 가변피치 semi-kaplan 수차는 유량조절을 위한 가이드베인은 생략하고 피치조절형 런너를 장착하여 기계적 결함은 줄이면서 유량변동이 큰 처리장에 특화된 기술이다. 마이크로수력발전 시스템은 설계조건(유량 0.35 $m^3/s$, 유효낙차 4.7 m)에서 90.2%의 수차효율 달성이 가능하였고 발전용량은 13.4 kW로 산정되었다. 설비가동률 74%로 가동 시 연간 약 86.8 MWh 에너지 생산을 통해 2.1%의 에너지 자립이 가능하고 이는 연간 49톤의 $CO_2$ 감축효과와 맞먹는다. 경제성 평가결과 초기 건설공사비가 200,000,000원 이하인 경우에는 내부수익률은 6.1%, 순현가는 15,539,000원, 편익-비용률은 1.08, 투자회수년은 15.5년으로 경제성이 충분한 것으로 나타났다.

• 수산해양기술연구
• /
• 제45권2호
• /
• pp.85-95
• /
• 2009

The fishing lamp is a fishing gear that gathers fish at night. But the cost of oil, which is used to light fishing lamp, has been risen significantly up to 30-40% of total fishing costs. Therefore it is very urgent to develop an energy economical fishing lamp in order to solve the business difficulties of fisheries. Under this background, this research aims at developing a fishing lamp for squid jigging and hairtail angling fishery using the LED, which has excellent energy efficiency and durability. The LED fishing lamp developed can be controlled to fix a fit direction of fish shoal deep because a fishing lamp can be adjustable up and down directions. One unit of fishing lamp has about an 80Watt capacity and the frame of fishing lamp is made of aluminium to emit generated heat of LED to outside. The LED lamp developed was highly durable, only 5.7% of emitting efficiency decreased for 18 months. The illuminance of a unit LED lamp was 2,070lux at 1m and 21lux at 10 m distance, and the intensity of LED lamp system emitted 2,580lux and 400lux at the respective distances. After development of this fishing lamp, 100 units are installed on operating fishing vessels. Experimental results show that energy consumption of squid jigging and hairtail angling was reduced by 40% and 87%, respectively. In conclusion, our methods showed elevated fishing power, compared with traditional fishing method: 37.7% for squid jigging and 24.5% for hairtail angling.

• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.3140-3145
• /
• 2012

본 논문에서는 코프래너 도파관(CPW)으로 급전된 소형 슬롯 안테나 설계방법에 대하여 연구하였다. 폭이 좁은 직사각형 슬롯에 삽입된 T형 튜닝 스트립의 위치, 폭, 길이를 조절하여 슬롯 안테나와 CPW 급전선이 임피던스 정합되도록 하였다. 슬롯의 길이 변화로 공진 주파수를 조절할 수 있고, 슬롯을 구부려서 소형화할 수 있다. 소형 슬롯 안테나의 공진 주파수와 임피던스 특성이 반 파장 슬롯 안테나와 비교하여 큰 변화가 없으므로 소형화 설계가 용이하다. 2.45 GHz ISM 대역용으로 소형 슬롯 안테나를 설계하고, FR4 기판(비유전율=4.4, 두께 0.8 mm) 상에 제작한 후 특성을 실험하였다. 측정된 결과들은 시뮬레이션과 잘 일치하여 본 연구의 타당성을 검증하였다. 제작된 소형 슬롯 안테나의 정재파비(SWR)가 2이하인 대역폭은 200 MHz(=2.32-2.52 GHz)로서 ISM 대역(2.4-2.48 GHz)용으로 적합하다. 측정된 복사패턴은 모노폴과 유사하게 E-면에서 8자형 지향성 패턴을 보이고, H-면내에서는 거의 무지향성 패턴을 보이며, 이득은 2.0 dBi 이므로 무선 랜, RFID, 휴대단말기용 안테나 등으로 응용이 적합할 것으로 기대된다.

• 한국농공학회지
• /
• 제17권4호
• /
• pp.3897-3920
• /
• 1975

Since the most of Korean dairy and cattle raising farms are too small to introduce western mechanized farming, it is necessary to develope small size equipments. This study has been carried to develop a rotary mower as on attachment of 8 to 10 horse powertiller which is widely spread in rural area. It will not ony be helpfull for the farmers to harvesting hay grass but also desirable to increase the power tiller utility. The protto type rotary mower designed through the fundamental investigations, has been modified and improved through the field trials, and a series of field tests has been carried to investigate its performance and economic feasibility comparing with existing vailable harvesting equipments. The results are as follows; 1. To increase the stability, two guide wheels are attached to both side of the protto type rotary mower. 2. To prevent the clinging of tall grasses, the vertical driving shafts are covered with cylindrical protectors. 3. The cutting height is adjustable in 8 steps from 2.5 to 20 centimeters by changing the length of guide wheel legs. 4. The practical Critical cutting speed were always higher than theoretical value in both case of single cutting blade and three when the cutting depth was 25 millimeter. 5. The peripheral speed of cutting blade was varied in response to the change of engine speed, mean while the peripheral speed was adequate as it was changhed from 25 to 35 meter per second when the power tiller is operated in proper working ground speed. 6. The time requirement to harvest 10 a were 88.7, 54.6 and 41.4 minutes for the first, second and third stage of ground speed respectively, and because of the difficulty of delivery, it was observed that operating with fourth stage of ground speed was not recomanendable when the grass height is taller than 90 centimeters. 7. The performance of rotary mower were 1.1-1.7, 1.4-4.0, 3.8-11.8 and 7.4-22.0 times of reciprocating mower, portable disc type cutter, hay scythe and ordinary sickle respectively. 8. When the slope exceeds, 20 degree the downward harvesting operation was impossible because of the excessive front end weight, while less than 5 degree of land slope did not effect in field operation. 9. Increased traveling spee caused higher cutting height and slight cutting failure, but seems not to effect to the gross yield, and the efficiency of cutting width were from 83 to 94 precent. 10. Tn rank of economy were rotary mower (3,2 stage operation), reciprocating mower, hay scythe, portable disc type cutter and sickle in order when the annul operation exdeeds 100 hours. From the above results, it is convinced that the protto type rotary mower is good enough to the livestock farmers as a hay harvesting equipment because of its economy, hardiness in operating and its out standing performance and hopefully it will contribute to the extension of Korean livestock farming.

• 한국콘텐츠학회논문지
• /
• 제16권11호
• /
• pp.421-433
• /
• 2016

최근 무형자산의 이전 거래 등에 대한 관심이 증대하였으나, 전자적 데이터베이스(electronic database)와 같은 지식정보 콘텐츠의 시장가치를 객관적으로 평가할 수 있는 모형이 부재함으로 관련 연구의 필요성이 제기된다. 따라서, 본 연구에서는 특허, 논문, 보고서 등을 포함하는 과학기술정보 콘텐츠의 시장가치를 평가하여, 무형자산 콘텐츠 시장에서 객관적 참조정보로 활용할 수 있도록 모형을 제안하는데 목적을 둔다. 먼저 기존의 가치평가에서 요구되는 핵심변수 중에서 콘텐츠 유형에 따른 현금흐름 산출로직을 살펴보고, 특허의 경우 기존의 기술가치평가에서 적용하는 개념을 기반으로 평가 방법을 제시하였다. 다음으로 논문과 보고서의 경우 이들 콘텐츠의 특징을 반영하기 위해 경제적 수명 추정시 기술혁신 지수와 시장수요 지수를 토대로 조절 가능한 정성적 평가 방법을 새롭게 제시하였으며, 현금흐름 산출로직은 투입원가 기반의 산정방식을 제시하였다. 본 연구를 통해 개별 과학기술정보 콘텐츠의 저작권 실시, 매매 등 적용할 수 있는 기술분야별, 비즈니스 모델별 평가체계를 구축할 수 있으며, 이러한 평가기반 구축을 통해 보다 객관적이고 합리적인 과학기술 콘텐츠 시장가치의 산출이 가능할 것으로 기대된다.

• 한국멀티미디어학회논문지
• /
• 제16권10호
• /
• pp.1147-1155
• /
• 2013

본 연구에서는 걸음 검출 알고리즘들의 걸음 검출률과 걸음 검출 결과를 상호 비교 분석할 수 있는 걸음검출 분석기를 구현하였다. 걸음 검출 분석기는 3축 가속도 센서의 데이터를 SVM 연산을 통하여 연속적인 에너지값으로 변환하고 걸음 측정 장치들에 사용되고 있는 걸음 검출 알고리즘들을 적용하여 걸음 검출결과를 동시에 비교할 수 있도록 함으로써 걸음 검출의 과정과 검출 형태, 그리고 정확성을 분석할 수 있게 하였다. 이를 위하여 걸음 검출 분석기는 에너지값을 에너지 파형 그래프로 나타내고, 걸음 검출 알고리즘을 에너지값에 적용하여, 걸음으로 검출된 Peak값들과 위치를 확인하고, 실제 걸음이 정상적으로 검출되지 않은 경우에는 원인을 시각적으로 분석할 수 있도록 하였다. 또한 걸음 검출 알고리즘마다 걸음 검출에 적용된 임계값을 그래프화하여 같이 표시함으로써, 걸음으로 인정되지 않는 경우에 사용된 임계값을 바로 확인하고, 이를 통하여 적절한 임계값을 구하는 수식의 조정에 필요한 요소들을 파악하는 데에 도움이 될 수 있도록 하였다. 본 연구에서 구현된 걸음 검출 분석기는 여러 걸음 검출 알고리즘을 수평적으로 비교, 분석함으로써 측정 장치에 가장 적합한 걸음 검출 알고리즘을 선택하거나, 기존의 걸음 검출 알고리즘의 성능 개선 방안을 파악하는 데에 효과적으로 활용할 수 있으므로 걸음 검출 알고리즘에 대한 연구, 또는 걸음 측정 장치의 설계에 폭넓게 활용될 수 있다.