• Journal of Periodontal and Implant Science
• /
• 제33권3호
• /
• pp.407-414
• /
• 2003

The aim of this study was to investigate the effect of third molar extraction on the periodontal status of the adjacent second molar. A total of 61 second molars in 31 adult periodontitis patients were examined. Among them, 27 second molars without adjacent third molars were included in the test group, and 34 second molars with third molar were included in the control group. Clinical parameters including plaque index, gingival index, and pocket depth and radiographic bone loss were measured around the second molar both in test and control group. The result showed that: (1) the mean plaque index and gingival index of control group were higher than these of the test group but the difference was not statistically significant, (2) the mean pocket depth of the control group was higher than the test group significantly at distal and buccal surface, (3) radiographic hone loss was greater in control group than test group significantly, (4) in Pearson correlation analysis between the age of extraction and radiographic bone loss in the test group, a positive relationship was shown(p<0.01). Within limitation of this study, it may be concluded that third molar extraction in periodontitis patients showed an improvement in periodontal status in contrast the patients group having third molar, therefore earlier a removal of third molar may minimize radiographic hone loss of the adjacent second molar.

• The Journal of Advanced Prosthodontics
• /
• 제12권1호
• /
• pp.1-8
• /
• 2020

PURPOSE. To investigate the influence of crown material (lithium-disilicate, 3Y-TZP zirconia) and abutment type (rigid implant, resin tooth with artificial periodontium) on wear performance of their antagonist teeth and adjacent teeth. MATERIALS AND METHODS. A mandibular left first molar (#36) with adjacent human teeth (mandibular left second premolar: #35, mandibular left second molar: #37) and antagonistic human teeth (maxillary left second premolar: #25, maxillary left first molar: #26, maxillary left second molar: #27) was prepared simulating a section of the jaw. Samples were made with extracted human molars (Reference), crowned implants (Implant), or crowned resin tooth analogues (Tooth). Crowns (tooth #36; n = 16/material) were milled from lithium-disilicate (Li, IPS e.max CAD) or 3Y-TZP zirconia (Zr, IPS e.max ZirCAD, both Ivoclar Vivadent). Thermal cycling and mechanical loading (TCML) in the chewing simulator were applied simulating 15 years of clinical service. Wear traces were analyzed (frequency [n], depth [㎛]) and evaluated using scanning electron pictures. Wear results were compared by one-way-ANOVA and post-hoc-Bonferroni (α = 0.05). RESULTS. After TCML, no visible wear traces were found on Zr. Li showed more wear traces (n = 30-31) than the reference (n = 21). Antagonistic teeth #26 showed more wear traces in contact to both ceramics (n = 27-29) than to the reference (n = 21). Strong wear traces (> 350 ㎛) on antagonists and their adjacent teeth were found only in crowned groups. Abutment type influenced number and depth of wear facets on the antagonistic and adjacent teeth. CONCLUSION. The clinically relevant model with human antagonistic and adjacent teeth allowed for a limited comparison of the wear situation. The total number of wear traces and strong wear on crowns, antagonistic and adjacent teeth were influenced by crown material.

• 구강회복응용과학지
• /
• 제32권1호
• /
• pp.47-59
• /
• 2016

목적: 하악 제1대구치 상실 시 인접 및 대합 치아들의 경사 및 정출 정도에 따른 교합력의 변화를 스트레인게이지를 이용하여 측정 및 비교하는 것이다. 연구 재료 및 방법: 인접 및 대합 치아들의 경사 및 정출이 심화되는 정도를 점진적으로 네 개의 다이에 표현 후, CAD/CAM 제작 맞춤형 다이 시스템을 통하여 주모형에 부착 및 교체 가능하도록 하였다. 치아에 스트레인게이지를 부착 후, 만능물성시험기로 저작력을 가하면서 상하악 치아의 교합력을 측정하였다. 통계처리는 독립표본 t검증과 일원배치 분산분석을 시행하였다(${\alpha}=.05$). 결과: 대구치 상실 후 치아이동에 따른 교합력의 양상은, 네 단계의 모형에 대한 교합력의 차이가 통계적으로 유의하였고, 감소 추세였다. 음식물 저작 시 인접 치아들의 이동에 따라 상악 제1, 2소구치, 하악 제2대구치에서 점차 교합력이 감소되었다. 음식물의 경도가 감소함에 따라 치아의 교합력이 점차적으로 감소하였다. 육포 저작 시 하악 제2대구치의 교합력이 가장 높게 측정되었다(P < 0.05). 결론: 하악 제1대구치가 상실되고 치아 이동이 일어나기 전에는 저작 시 치아가 상실되지 않았을 때에 비해 인접 및 대합 치아들의 교합력이 높은 반면, 치아 이동이 진행됨에 따라 교합력은 정량적으로 감소하였다.

• Imaging Science in Dentistry
• /
• 제43권4호
• /
• pp.289-293
• /
• 2013

Purpose: This study was performed to determine the relationship between the stage of tooth eruption (both vertical and mesio-angular) and chronological age. Materials and Methods: Indirect digital panoramic radiographs were used to measure the distances from the dentinoenamel junction (DEJ) of the second molars to the occlusal plane of the second molar teeth and of the adjacent third molars in 264 Thai males and 437 Thai females using ImageJ software. The ratio of those distances was calculated by patient age, and the correlation coefficient of the ratio of the third molar length to the second molar length was calculated. Results: The correlation between the height of the vertically erupted upper third molar teeth and age was at the intermediate level. The age range of ${\geq}15$ to <16 years was noted to be the range in which the correlation between the chronological age determined from the eruptional height and actual chronological age was statistically significant. The mean age of the female subjects, in which the position of the right upper third molar teeth was at or above the DEJ of the adjacent second molar but below one half of its coronal height was $19.9{\pm}2.6$ years. That for the left side was $20.2{\pm}2.7$ years. The mean ages of the male subjects were $20.1{\pm}3.3$ years and $19.8{\pm}2.7$ years for the right and left sides, respectively. Conclusion: It might be possible to predict chronological age from the eruption height of the wisdom teeth.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.489-502
• /
• 2006

The purpose of this study was to determine the relationship between the third molar and periodontal status of the adjacent second molar. Fifty patients who had four maxillary and mandibular second molars were consecutively selected for the study subjects. The subjects provided a total of 200 molars, i. e., 100 maxillary and 100 mandibular molars, and classified the groups as follows; third molars that are normally erupted are control group, that are impacted are test 1 group, that are simply extracted are test 2 group, that are surgically extracted are test 3 group. Probing depth, plaque index, gingival index and mobility were measured. The results were as follows. 1. In mesial probing depth, there was no significantly difference. In distal probing depth, there was a significantly difference between control group and test 1 & 3 group in maxilla and between control & test 2 group and test 1& 3 group in mandible(p<0.05). 2. In buccal probing depth, there was a significantly difference between test 2 group and test 3 group in mandible. In lingual probing depth, there was a significantly difference between control group and test 1 & 3 group in mandible(p<0.05). 3. In plaque index, there was a significantly difference between test 1 group and test 2 group in maxilla, between test 1 group and control & test 2 group in mandible(p<0.05). 4. In gingival index, there was a significantly difference between control group and test 1 & 3 group in mandible. In mobility, there was no significantly difference(p<0.05). As a result of this study, the second molars adjacent to the third molars that are impacted or surgically extracted had poor prognosis, so impacted third molars should be extracted in early time and the second molars are actively treated for periodontal health.

• 대한소아치과학회지
• /
• 제24권4호
• /
• pp.771-775
• /
• 1997

Ectopic eruption is defined as abnormal eruption and results in malpositioned teeth and abnormal root resorption of adjacent teeth. Ectopic eruption, first reported by Chapman, occurs in 3% of the population and that mostly in the maxilla. Etiologic factors include narrow maxilla, large maxillary teeth, retarded calcification of the first molar, inclined eruption path of the first molar and retruded position of the maxilla. Impaction of the second molar is rare and occurs mostly in the mandible. Major causes are large teeth and insufficient arch length. Halterman has devised a method of distalizing a ectopically erupting first molar by cementing a band on the second deciduous molar with a hook soldered and a button bonded to the occlusal surface of the first permanent molar. Ectopically erupted posterior teeth should be treated early to maintain normal development of the dentition, harmony of facial growth and occlusal support, a failure to do so could result in severe malocclusion, periodontal damage and continued root resorption of the adjacent teeth. Early detection and treatment is thus vital. The author is submitting this report as he has obtained favorable results in treating a patient who came to the SNUDH Dept. of Pediatric Dentistry complaining of the first molar by using a modified Halterman appliance.

• 대한치과교정학회지
• /
• 제16권2호
• /
• pp.123-133
• /
• 1986

The purpose of this study was to collect the information of the straight-wire appliance and to determine the amount of second-order bends in clinical orthodontics. The author analysed the study model of 50 individuals with normal occlusion and results were obtained as follows. 1. The crown angulation was 4 degree in upper central incisor, 7 degree in upper lateral incisor, and 0 degree in lower central incisor and lateral incisor. 2. The crown angulation was 8 degree in upper cuspid and 2 degree in lower cuspid. 3. The crown angulations were 4 degree in upper first bicuspid, upper second bicuspid and lower second bicuspid and 1 degree in lower first bicuspid. 4. The crown angulation was 3 degree in upper first molar, 0 degree in upper second molar, 5 degree in lower first molar and 8 degree in lower second molar. 5. The crown angulations in lower arch were progressively increased from first premolar to second molar. 6. In upper arch, as the crown angulation of one tooth was increased, those of adjacent teeth were increased, too. 7. In the case of lower arch, the crown angulation of cuspid was increased as that of lateral incisor was increased, the crown angulation of second premolar was increased as that of first premolar was increased, and similarity the crown angulation of second molar was increased as that of first molar was increased.

• Imaging Science in Dentistry
• /
• 제43권4호
• /
• pp.219-225
• /
• 2013

Purpose: The purpose of this study was to determine the prevalence of missing and impacted third molars in people aged 25 years and above. Materials and Methods: The study sample of 3,799 patients was chosen randomly from patients who visited Pusan National University Dental Hospital and had panoramic radiographs taken. The data collected included presence and impaction state, angulation, and depth of impaction of third molars, and radiographically detected lesions of third molars and adjacent second molars. Results: A greater percentage of men than women retained at least one third molar. The incidence of third molars decreased with increasing age. The incidence of partially impacted third molars greatly declined after the age of 30. Vertically impacted maxillary third molars and horizontally impacted mandibular third molars were most frequent in all age groups. Among the maxillary third molars, those impacted below the cervical line of the second molar were most frequent in all age groups, and among the mandibular third molars, deeply impacted third molars were most frequent in those aged over 40. Dental caries was the most common radiographic lesion of the third molars. Mesioangularly impacted third molars showed radiographic lesions in 13 (9.5%) adjacent maxillary second molars and 117 (27.4%) mandibular second molars. Conclusion: The number of remaining third molars decreased and the percentage of Class C depth increased with age. Caries was the most frequent lesion in third molars. Partially impacted mesioangular third molars showed a high incidence of caries or periodontal bone loss of the adjacent second molar. Regular oral examination will be essential to keep asymptomatic third molars in good health.

• Journal of Korean Dental Science
• /
• 제9권2호
• /
• pp.63-68
• /
• 2016

Pressure root resorption can be observed during the eruption of permanent dentition, especially of the maxillary canines (affecting lateral incisors) and mandibular third molars (affecting mandibular second molars). Since the cause of root resorption of the adjacent affected teeth is evident, treatment simply involves extraction of the impacted tooth. However, there have been few reports on the prognosis of the remaining resorbed tooth, as dentists often choose to extract them when damage due to root resorption is observed. We report a case involving a tooth that was severely resorbed due to pressure from an adjacent impacted tooth. After extraction of the impacted tooth, the remaining tooth retained vital pulp and survived as a functional tooth.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.