• 폴리머
• /
• 제36권5호
• /
• pp.643-650
• /
• 2012

폴리우레탄의 열적 안정성을 개선하기 위하여, poly(oxydiethylene adipate)-diol(PAD), 4,4'-MDI, Cloisite 30B(30B), melamine phosphate(MP)를 사용하여 poly(adipate urethane)(PAU)과 PAU/30B(30B 2.7 wt%), PAU/MP(MP 2.2 wt%), PAU/30B/MP(30B 2.2 wt%, MP 2.2 wt%) 복합체를 합성하고 열분해 특성을 연구하였다. PAU 복합체에서 Cloisite 30B와 MP의 분산을 안정하고 균일하게 유지시키기 위하여, adipic acid와 diethylene glycol의 에스테르 반응 단계에서 Cloisite 30B와 MP를 도입하였다. $250^{\circ}C$ 이하에서 PAU 복합체가 순수 PAU보다 더 빠르게 열분해 되었다. 고온에서는 30B와 MP에 의하여 열안정성이 개선되어 분해속도가 현저히 감소하였으며, $700^{\circ}C$ 잔량도 크게 증가하였다.

• Elastomers and Composites
• /
• 제38권4호
• /
• pp.342-353
• /
• 2003

본 연구는 폴리에스터 가소제를 이용한 내제트유성 PVC계 실란트 개발에 관한 것이다. PVC 공중합체에 아디프산 글리콜 폴리에스터 가소제(Songcizer P-3000) 또는 DOP를 배합하여 연료유 함침 전후의 칩입도 변화, 용해도, 흐름성 및 인장 접착 신율을 측정하였다. 연료유 함침 전후 칩입도 변화 및 용해도를 측정한 결과 폴리에스터 가소제의 내제트유성이 DOP 가소제를 사용한 것 보다 작은 것으로 나타났다. PVC 공중합체에 Songcizer P-3000의 배합비를 중량비로 500 phr로 고정하고 접착성 향상제인 DCDP (dicyclopentadiene)계 석유수지를 400 phr까지 배합한 결과 첨가량에 비례하여 접착 신율이 감소하였다. 탄산칼슘은 연료유의 확산을 방지하였고 Songcizer P-3000을 사용한 경우 용해도를 감소시키는 결과를 얻었다.

• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.51-61
• /
• 2004

Reaction intermediates PCP/BZA (PBI) and tetramethylene bis(orthophosphate) (TBOP) wer synthesized from polycaprolactone (PCP) and benzoic acid (BZA) and from pyrophosphoric acid and 1,4-butanediol, respectively. Benzoic acid modified polyesters containing phosphorus (APTB-5, -10, -15) were synthesized by polycondensation of the prepared PBI (containing 5, 10, 15wt% of benzoic acid), TBOP, adipic acid, and 1,4-butanediol. The structure and characteristics of APTBs were examined using FT-IR, NMR, GPC, and TGA analysis. The increase of the amount of BZA in the synthesis of APTBs resulted in decrease in average molecular weight and kinematic viscosity. From the TGA analysis of APTBs, it was found that the afterglow decreased with the amount of BZA content at the high temperatures.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권3호
• /
• pp.215-222
• /
• 2006

The Lowry method was used in this study to measure protein in Haemophilus influenzae type b (Hib) conjugate vaccines (polyribosylibitol phosphate-tetanus toxoid; PRP-TT) using deoxycholic acid (DOC) to induce protein precipitation. Trichloroacetic acid (TCA) did not induce precipitation adequately from the Hib conjugate bulk and the freeze-dried Hib conjugate product. Its yield was approximately 50%. The matrix structure of Hib conjugate inhibits precipitation by TCA. Although the Lowry method can be carried out without precipitation in Hib conjugate bulk when no residual impurities (adipic acid dihydrazide [ADH], 1-ethyl-3-(3-dimethylamino-propyl) carbodiimide-HCI [EDAC], phenol and cyanogens bromide [CNBr], etc.) are present, it cannot be used for Hib conjugate products that contain sucrose 8.5%, because 8.5% concentration of sucrose enhanced the protein concentration. DOC- and HCl-induced precipitation is an alternative method for evaluating the protein content of the Hib conjugate bulk and the Hib conjugate product. The precipitation was optimal with a final concentrate of 0.1% for DOC at $4^{\circ}C$ and pH 2. This Lowry method, using DOC/HCI precipitation to induce protein precipitation, was confirmed a consistent, reproducible, and valid test for proteins in Hib conjugate bulk and its freeze-dried product.

• Asian Journal of Atmospheric Environment
• /
• 제3권1호
• /
• pp.42-51
• /
• 2009

Saturated n-dicarboxylic acids ($C_2-C_7$, $C_9$), unsaturated dicarboxylic acids (maleic, fumaric, phthalic acid), ketocarboxylic acids (pyruvic, glyoxylic acid), and dicarbonyls (glyoxal, methylglyoxal) were determined in size-segregated samples with a high-volume Andersen air sampler at a suburban site in Saitama, Japan, May 12-17 and July 24-27, 2007 and January 22-31, 2008. The seasonal average concentrations of these detected organic acids were 670 $ng/m^3$, accounting for about 4.4-5.7% (C/C) of water-soluble organic carbon (WSOC) and 2.3-3.6% (C/C) of organic carbon (OC). The most abundant species of dicarboxylic acids was oxalic acid, followed by malonic, phthalic, or succinic acids. Glyoxylic acid and methyglyoxal were most abundant ketocarboxylic acid and dicarbonyl, respectively. Seasonal differences, size-segregated concentrations, and the correlations of these acids with ambient temperatures, oxidants, elemental carbon (EC), OC, WSOC, and ionic components were also discussed in terms of their corresponding sources and possible secondary formation pathways. The results suggested that photochemical reactions contributed more to the formation of particulate organic acids in Saitama suburban areas than did direct emissions from anthropogenic and natural sources. However, direct emissions of vehicles were also important sources of several organic acids in particles, such as phthalic and adipic acids, especially in winter.

• 한국응용과학기술학회지
• /
• 제20권1호
• /
• pp.57-63
• /
• 2003

An intermediate, tetramethylene bis (orthophosphate), was prepared by the esterification of pyrophosphoric acid and l,4-butanediol. Then pyrophosphoric-containing modified polyesters (ATTBs) were synthesized by polycondensation of tetramethylene bis(orthophosphate), trimethylolpropane, adipic acid, and l,4-butanediol. The content of l,4-butanediol was varied from 10 to 20wt% for the reaction. The increase of the amount of l,4-butanediol in the synthesis of ATTBs resulted in increase in average molecular weight and decrease in kinematic viscosity owing to the excellent flowability and reactivity of l,4-butanediol.

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.275-282
• /
• 2003

Aqueous polyurethane dispersion was synthesized using phosphorus compound which received significant attention for the replacement of halogenated flame retardants. In this study, polyols which have phosphorus moity in their structural unit were synthesized by two-step polycondensation reaction using dimethyl phenylphosphonate, ethylene glycols. adipic acid, and 1,4-butanediol. In the next step, polyurethane dispersion was prepared using these polyols, isophorone diisocyanate with dimethyl propionic acid. The particle size of polyurethane latex was reduced from 347 nm to 240 nm with increasing DMPA content. It was observed that the LOI values of prepared coatings increased from 27% to 35% with increasing phosphorus content.

• Preventive Nutrition and Food Science
• /
• 제6권3호
• /
• pp.142-146
• /
• 2001

This study was performed to investigate chemical and functional properties of Glechoma hederacea leaves in respect to its potential use as food material or as a medicinal herb. The chemical compositions on a dry harris were 20.38% in protein, 3.96% in fat, 59.58% in carbohydrate, 15.78% in ash, 5.36% in reducing sugar, 14.11% in total sugar and 0.26% in polyphenol, respectively. The free sugars were mainly comprised of glucose, fructose and sucrose. In fatty acids compositiosn, linolenic acid showed the highest concentration at 45%, while the ratios of saturated to unsaturated fatty acids were 1 : 1.91. Seventeen kinds of total amino acids were determined, with the highest concentration (2,465.71 mg%) of glutamic acid. Among the free amino acids, praline showed the highest concentration (260.09 mg%), followed by glutamine, $\alpha$ -amino adipic acid, glutamic acid and valine. The contents of major minerals were 647.32 mg% in Na, 597.53 mg% in K and 239.75 mg% in Ca. The antioxidative activity of 10% water extract was similar to that of 50 ppm tocopherol. The nitrite scavenging ability reached the highest bevel at pH 1.2 and the lowest at pH 6.0.

• 산업기술연구
• /
• 제38권1호
• /
• pp.15-19
• /
• 2018

In this study, hyaluronic acid (HA) was electro-spun to fabricate nanofibrous membranes for support materials. Because HA is very hygroscopic, it is difficult to obtain enough viscosity to apply electrospinning method. Therefore, we mixed HA with polyethylene oxide (PEO) to obtain proper viscosity and added adipic acid (ADH) to promote cross-linking of PEO/HA during electrospinning. The morphology of PEO/HA membrane was optimized according to PEO/HA concentration ratio and spinning rate. Finally, we fabricated gold-nanoparticle-embedded PEO/HA membranes and their catalyst activities were evaluated in tetramethylbenzidine (TMB) oxidation.

• 한국식품영양과학회지
• /
• 제42권9호
• /
• pp.1446-1451
• /
• 2013

Chitosan 함유 보존제를 각각 1%, 3%, 5% 첨가하여 제조한 patty의 관능검사 결과, 맛과 종합적 기호도의 경우 PI-1 처리구, PII-1 처리구가 대조구보다 유의적으로 높은 값을 나타내었다. DPPH 라디칼 소거능은 대조구, 1% PI-1 처리구, 1% PII-1 처리구가 각각 13.54%, 21.78%, 14.07%로 PI-1 처리구가 대조구보다 유의적으로 높았다. 총균수는 저장 10일째 PI-1 처리구는 $10^4$ CFU/g으로 대조구보다 약 1 log cycle 낮았으며, 대장균군수는 저장 10일째 PI-1 처리구가 2.98 log CFU/g으로 가장 낮았으며, 다음은 PII-1 처리구 낮았다. 가열 감량은 PI-1 처리구와 PII-1 처리구가 대조구보다 낮았고, 저장기간이 경과할수록 유의적으로 감소하는 경향을 나타내었다. 보수력은 PI-1 처리구가 65.84%로 가장 높았으며, 저장기간 동안 대조구보다 높은 값을 유지하였다. 휘발성 염기태 질소는 대조구가 5일째까지, 보존제 처리구는 10일째까지 가식권의 한계치 이하로 나타났다. L 값은 저장기간 동안 뚜렷한 변화는 나타나지 않았고 a 값은 저장 5일째부터 급격히 낮아졌으며, b 값은 저장기간 동안 서서히 증가하는 경향을 나타내었다.