• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1264-1269
• /
• 2004

This research describes the application of hydrocarbon refrigerants for heat pump system which is needed for fish farm. Tested refrigerants are HCFC-22 and hydrocarbon refrigerants(CARE 50 and ASR-20). CARE 50 is mixture of R-290 and R-170, and ASR-20 is mixture of R-152a, R-290 and other additives. Heat pump consist of shell and tube heat exchanger, scroll compressor, expansion valve and accumulator. Manual expansion valve is used for testing of wide range evaporating temperature. Hydrocarbon refrigerants show a good performance as an alternative for HCFC-22 in the range of evaporating temperature from $-6^{\circ}C$ to $6^{\circ}C$.

• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.79-84
• /
• 2005

평판 표면에 충돌하는 축대칭, 과소팽창 제트에 대한 실험적 연구가 수행되어졌으며, 벽압력 및 단열 벽온도 분포가 자세히 측정되어졌다. 벽온도 분포 결과에 대한 설명을 위하여 자유제트 내에서의 전온도 값을 전온도 탐침을 사용하여 측정하였다. 본 연구에서 실험 변수로는 과소팽창비와 노즐-평판간 거리가 고려되었다. 노즐-평판 간 거리에 따라 제트 경계 및 충돌면에서의 에너지 박리에 의해 서로 다른 형태의 단열 벽온도 분포가 나타났으며, 과소팽창비가 큰 경우, 중심영역에서의 저온 유체 입자의 고립효과로 정체점의 회복계수가 크게 낮아지는 현상 또한 관찰되었다.

• 한국디지털건축인테리어학회논문집
• /
• 제11권1호
• /
• pp.33-42
• /
• 2011

As the development of construction technology and new materials, building requirements has been varied gadually. Comfortable environment and serviceability of production activity and energy conservation are being dealt with very seriously. Recently localization of engineering technology of Power Plant, however, construction materials and domestic technology are being developed forcingly. According to above topics this thes is going to study roof waterproofing, thermal insulation and evaluate adiabatic performance and evaluation of properties of waterproofing materials and energy conservation. The results of studying and evaluating of roof waterproofing, thermal insulation and adiabatic performance of Power Plant are as follows. 1. Sheet waterproofing method is better than that of asphalt waterproofing method in that adaptability of wearhertight, thermal resistant, contraction and expansion. 2. It is required to replace polyurethane or ethylene used as thermal insulation with rock wool which is noncombustible materials. 3. It is recommended to usd outer insulation method than inner insulation method due to superioty of outer insulation method. Efficiency of insulation materials used in power plant is generally good except perlite mortar used in the power plant(YGN 1-2, GRI 1-2).

• Journal of Biosystems Engineering
• /
• 제20권3호
• /
• pp.205-216
• /
• 1995

A fast and inexpensive approximate analysis method to predict power output characteristics of the Stilting engines in a preliminary design stage was investigated. In basic equations proposed by Walker, typical temperatures of working fluids in expansion and compression spaces were treated as those of working fluids in heater and cooler respectively. While the temperature of working fluid in the expansion space was actually lower than that of working fluid in the heater, the temperature of working fluid in the compression space was higher than that of working fluids in the cooler. In this paper, the working fluid temperature of expansion space was treated as lower than the heater temperature and that of compression space was treated as higher than the cooler temperature. Also, according to them, the power output characteristics of the Stirling engine were evaluated with respect to the GPU-3 and 4-215 Stilting engines. The following conclusions were drawn from the analysis. 1. Using the available experimental data from the GPU-3 Stirling engine, it was shown that the approximate analysis predicts the brake power with a maximum error of 19 percent at 1, 000rpm and with a minimum error of 3 percent at 2, 000rpm. 2. The approximate analysis data which for the GPU-3 Stirling engine were much closer to the experimental data than those of adiabatic 2nd order and 3rd order analysis within 1, 500rpm to 2, 500rpm. 3. The approximate analysis data which for the GPU-3 and 4-215 Stilting engines were much closer to the experimental data than those of the Beal number analysis.

• 폴리머
• /
• 제29권6호
• /
• pp.605-612
• /
• 2005

폴리올레핀계 공중합체 수지인 polypropylene-polyethylene-(1-butene) 미발포 수지에 부탄 가스를 물리적 발포제로 이용하여 단열 팽창시킨 발포체의 등온 결정화 거동을 DSC(differential scanning calorimeter)와 편광 현미경을 이용하여 고찰하였으며, 얻어진 결과는 Avrami 식을 이용하여 해석하였다. 발포체의 결정화 반감 시간이 미발포체의 결정화 반감 시간보다 짧고 핵 생성 속도 증가에 따른 nucleation density증가 및 구정 성장 속도가 더 빠름이 발견되었는데, 이는 가공 공정 중의 분자량 감소보다는 단열 팽창 과정에서 진행되는 연신 배향 결정화에 의해 결정화 속도가 증가하였기 때문인 것으로 사료된다. 또한, 단열 구조 발포체는 직경 30 $\mu$m 이하의 균일한 closed cell 형태를 나타내고 있음을 SEM 을 이용하여 관찰하였고, 발포체의 물성은 미발포체에 비해 단열성이 크기 때문에 열전도도가 감소하였고 압축강도는 발포비가 증가할수록 감소하는 것을 알 수 있었다.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.475-481
• /
• 2013

$850{\sim}1000^{\circ}C$ 정도의 저온에서 소성된 MgO 분말을 적정량 치환한 콘크리트는 장기팽창성을 갖는다. 이러한 팽창성은 저온소성한 MgO 분말의 느린 수화반응을 통해 이루어지기 때문에 장기재령까지 수축을 보상하는 특성을 가진다. 최근 수화열 저감, 내구성 향상 등의 이유와 함께 건설 산업의 탄소저감을 위한 방안으로 플라이애시 및 고로슬래그 등과 같은 혼화재의 사용이 증가하고 있다. 따라서 저온소성한 MgO 분말을 팽창재로 사용하기 위해서는 이러한 혼화재와 MgO 분말을 함께 사용한 콘크리트의 특성 규명이 필요하다. 이 연구에서는 플라이애시 콘크리트에 저온소성한 MgO 분말을 치환한 콘크리트의 슬럼프, 공기량, 수화열뿐만 아니라 장기재령 압축강도 및 길이변화 등의 기본 물성을 실험을 통해 조사하였다. 단열온도 상승시험 결과, 5% 수준으로 MgO 분말을 치환한 콘크리트의 단열온도상승속도 및 최종온도가 플라이애시 콘크리트보다 다소 작게 나타났다. 또한 압축 강도 실험결과 물-결합재비에 따라 저온소성한 MgO 분말이 장기재령 압축강도에 미치는 영향이 다르게 나타났으며, 장기적인 길이변화 실험 결과 저온소성한 MgO 분말을 치환한 콘크리트에서 큰 팽창효과를 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제2권3호
• /
• pp.1-12
• /
• 1994

A model engine having a flat cylinder head and a piston face and an off-center intake valve is investigated in this analysis. Calculation domain is confined to the half of the cylinder with swirl free inlet velocity condition. Due to the absence of measured inlet conditions, the inlet flowrates during induction period are calculated from overall mass and energy conservation requirements. Finite difference equation for velocity and pressure were solved by modified SIMPLER algorithm, standard k-$\varepsilon$turbulence model and hybrid scheme. From the result of prediction, dimensionless velocity distribution and turbulence intensities are investigated at each crank angle.

• 한국입자에어로졸학회지
• /
• 제10권3호
• /
• pp.93-97
• /
• 2014

Condensation particle counter (CPC) has been one of the most important basic instrument for measuring number concentration of submicron aerosols. The principle of the CPC is to expose aerosols to a supersaturated vapor and cool down which causes adiabatic expansion. The particles grow by heterogenous nucleation to a sufficient size for easy detection by optical method. However, for growth by condensation, CPC essentially needs both saturater and condensor causing a heavy system. Therefore, it is hard to install commercial CPC to tethered balloon package system. In this study, we developed customized CPC for tethered balloon package system called Hy-CPC which is lighter and smaller in structure than commercial CPCs, and evaluated activation efficiency and detection efficiency by Hy-CPC using electrostatic method (electrometer and Faraday cup).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.619-624
• /
• 1999

The purpose of this study is to provide the optimum mix design of fly ash concrete to be placed at the concrete face rockfill dam for pumped storage power plats. The basic performance tests including compressive strength, modulus of elasticity, unit weight, coefficient of thermal expansion, shrinkage, adiabatic temperature rise and analysis of thermal stress were conducted for fly ash concrete. From this study, the fly ash concrete represented the better results in the aspects of basic performance and economy than ordinary portland cement concrete. Especially the concrete mix design containing 15% of fly ash is recommended to be applied in the construction of the concrete face rockfill dam for pumped storage power plants.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.211-216
• /
• 1998

Parameter analysis of mass concrete structures of two types subjected to heat of hydration and surface heat transfer is presented. Thermal stress analysis is conducted through the 3D FEM program. Thermal and mechanical properties of concrete, for example, conductivity, heat capacity, density, thermal expansion coefficient are varied from 80% to 120% of a reference value, and the change of thermal stress against the parameter is achieved respectively. As a result of the analysis, the parameter affecting thermal stress most significantly is an adiabatic temperature rise in the case of wall-type structure, and an initial temperature of concrete in the case of slab-type structure, respectively.