• Journal of Powder Materials
• /
• v.26 no.5
• /
• pp.395-404
• /
• 2019

Aluminum nitride (AlN) has excellent electrical insulation property, high thermal conductivity, and a low thermal expansion coefficient; therefore, it is widely used as a heat sink, heat-conductive filler, and heat dissipation substrate. However, it is well known that the AlN-based materials have disadvantages such as low sinterability and poor mechanical properties. In this study, the effects of addition of various amounts (1-6 wt.%) of sintering additives $Y_2O_3$ and $Sm_2O_3$ on the thermal and mechanical properties of AlN samples pressureless sintered at $1850^{\circ}C$ in an $N_2$ atmosphere for a holding time of 2 h are examined. All AlN samples exhibit relative densities of more than 97%. It showed that the higher thermal conductivity as the $Y_2O_3$ content increased than the $Sm_2O_3$ additive, whereas all AlN samples exhibited higher mechanical properties as $Sm_2O_3$ content increased. The formation of secondary phases by reaction of $Y_2O_3$, $Sm_2O_3$ with oxygen from AlN lattice influenced the thermal and mechanical properties of AlN samples due to the reaction of the oxygen contents in AlN lattice.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.856-862
• /
• 2009

This study examined the effects of liquid and solid additives on the morphological, mechanical and thermal insulating properties of rigid polyurethane foams (PUFs). The PUFs synthesized with tetramethylsilane (TEMS) as a liquid-type additive showed a smaller average cell size and lower thermal conductivity than those with the aerosil 200 and clay 30B as solid-type additives. When TEMS was added, the average cell size of the PUF became more uniform and finer due to the reduced surface tension of the polymer solution, which increased the nucleation rate and number of bubbles produced and reduced cell size. The PUFs with TEMS showed the highest closed cell contents among the PUFs prepared using TEMS, aerosil 200 and clay 30B. This suggests that the insulation properties of PUF can be determined by both the size of the cell structure and the amount of closed cell contents in the system. The compression and flexural strengths of the PUF increased slightly when the aerosil 200, clay 30B and TEMS were added compared those of the neat PUF. The reaction profiles of the PUFs showed a similar gel and tack tree time with the reaction time among the PUFs synthesized with three different additives and neat PUF. This suggests that the nucleating additives used in this study do not affect the bubble growth of the chemical reaction, and the additives may act as nucleating agents during the formation of PUF. From the above results of the cell size, thermal conductivity, closed cell contents and reaction profile of the PUFs, liquid-type nucleating agent, such as TEMS, is more effective in decreasing the thermal conductivity of the PUF than solid-type nucleating agent, such as aerosil 200 and clay 30B.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.248-260
• /
• 2021

Cobalt-chromium alloys are used to fabricate various dental prostheses, and have advantages of low cost and excellent mechanical properties compared to other alloys. Recently, selective laser melting, which is an additive manufacturing method, has been used to overcome the disadvantages of the conventional fabrication method. A local rapid heating and cooling process of selective laser melting induces fine microstructures, grain refinement, and reduction of porosities of the alloys. Therefore, it can improve mechanical properties compared to the alloys fabricated by the conventional method. On the other hand, layering process and rapid heating and cooling cause accumulation of a large amount of residual stresses that can adversely affect the mechanical properties. A heat treatment for removing residual stresses through recovery and recrystallization process caused complicated changes in mechanical properties induced by phase transformation, precipitate and homogenization of the microstructures. The purpose of this review was to compare the manufacturing methods of Co-Cr alloys and to investigate the characteristics of Co-Cr alloys fabricated by selective laser melting.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.15-20
• /
• 2022

Colours are primarily composed of three properties - hue, brightness, and saturation, However, each property of colour is not independently visually recognised. Previous studies on saturation and brightness found that brightness was sensed differently depending on the degree of purity of the saturation; however, most of the psychophysical experiments used subtractive mixing. Therefore, fundamental research on colour perception based on display is needed. In this study, we conducted a psychophysical experiment and to investigate the visual characteristics of saturation and brightness based on a display with a self-luminous system. After selecting a certain brightness in the additive-mixed display, the experiment was conducted by adjusting the saturation of the main colours. Thus, by analysing the experimental results, we determined whether the results were the same as ones from subtractive mixing and whether the data are meaningful for the characteristics of colour perception. We also suggested future research directions.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.2
• /
• pp.135-141
• /
• 2012

Purpose: Polymerization of HEMA(2-hydroxyethyl methacrylate) which can be used in the soft contact lens has been performed by using electron beam(EB) irradiation, and examined the best condition for the polymerization. Comparing the physical properties of the contact lenses to the one fabricated by thermal polymerization method, we check the use possibility of the EB irradiation to the fabrication of the soft contact lens. Methods: We investigated the degree of polymerization of the HEMA according to the composition of the monomer, the additive ratio and the dose of electron beam (0~120 kGy). The degree of polymerization was measured depending on the EB dose to research the best synthetic condition under the EB irradiation. The physical properties of the contact lens such as water content(%), oxygen transmissibility(Dk/t) and optical transmittance were analysed by using the FT-IR results with comparing the two different polymerization method (thermal and electron beam polymerization) with same additive ratio. Results: When the dose of electron beam was above 100 kGy, the degree of polymerization of HEMA was above 99% with regardless using cross-linker and initiator. The water content of the lens fabricated by EB method showed 10% higher than the one by the thermal method which was 40%. The lens fabricated by EB method also showed higher oxygen transmissibility(Dk/t) as same with the water content, and showed twice higher value in the lens fabricated by pure HEMA. According to the FT-IR results, hydrophilic property of the lens fabricated by EB method was increased due to increasing the intermolecular hydrogen bonding. It showed above 90% optical transmittance in the visible range of wavelength on the contact lenses fabricated by the both of two different polymerization method. Conclusions: The polymerization of HEMA without cross-linker and initiator was successful above 100 kGy of EB irradiation. Moreover the lens fabricated from the polymer synthesized by pure HEMA with 100 kGy of EB showed the highest water content and oxygen transmissibility. Therefore EB irradiation is another possible method to synthesize the polymer which can be used for the soft contact lens.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.585-591
• /
• 2018

Characteristics of nano-structured $SiO_2:Zn$ hollow powders prepared in the micro drop fluidized reactor process were investigated with respect to bandgap energy and surface activity. The $SiO_2:Zn$ hollow powders were successfully prepared continuously in the one step process with reasonable production efficiency, with varying the amount of THAM (tris(hydroxymethyl)-aminomethane) additive and concentration of $Zn^{2+}$ ions. The doping of $Zn^{2+}$ ions into $SiO_2$ lattice led to the reduction of bandgap energy by forming the acceptor level of $Zn^{2+}$ below the conduction band of $Si^{4+}$ ions. The hollow shape also contributed to reduce the bandgap energy of $SiO_2:Zn$ powders. The doping of $Zn^{2+}$ ions into $SiO_2$ hollow powders could enhance the surface activity by forming SiO-H stretching and oxygen vacancies at the surface of $SiO_2:Zn$ powders.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.2
• /
• pp.125-133
• /
• 2017

KAERI is conducting research on spent cladding hulls and additive metals to generate a solidification host matrix for the noble metal fission product waste in anode sludge from the electro-refining process to minimize the volume of waste that needs to be disposed of. In this study, alloy compositions Zr-17Cr, Zr-22Cr, and Zr-27Cr were prepared with or without eight noble metals representing fuel waste using induction melting. The microstructures of the resulting alloys were characterized and electrochemical corrosion tests were conducted to evaluate their corrosion characteristics. All the compositions had better corrosion characteristics than other Zr-based alloys that were evaluated for comparison. Analysis of the leach solution after the corrosion test of the Zr-22Cr-8NM specimen indicated that the noble metals were not leached during corrosion under 500 mV imposed voltage, which simulates a highly oxidizing disposal environment. The results of this study confirm that Zr-Cr based compositions will likely serve as chemically stable waste forms.

• The Korean Journal of Pharmacology
• /
• v.18 no.1
• /
• pp.55-63
• /
• 1982

Lipid peroxidation is the reaction of oxidative deterioration of polyunsaturated lipids and this peroxidation involves the direct reaction of oxygen and lipid to form free radical intermediates, which can lead to autocatalysis. As results of the extensive studies on the lipid peroxidation by many authors, the relationship between lipid peroxidation and the drug metabolizing system as well as the actions of free radicals on the peroxidation was reasonably well known. For a long time, the mechanism of hepatotoxicity of $CCl_4$ was not clearly understood. However, it is now quite well established that $CCl_4$ is activated in vivo to a free radical which is a highly reactive molecule. Therefore, lipid peroxidation which induces the reduction of cytochrome P-450 and aminopyrine demethylase activity is known as decisive event of $CCl_4$ hepatotoxicity. On the other hand, it was also reported that singlet molecular oxygen produces lipid peroxidation in liver microsomes. In this study the effects of benzoyl peroxide on the lipid peroxidation and drug-metabolizing enzyme were examined. Benzoyl peroxide mixed with starch and phosphates etc. is usually used as a food additive for flour bleaching and maturing purpose because of its oxidative property. Albino rats were used for the experimental animals. Benzoyl peroxide was suspended in soybean oil and sesame oil and administered intraperitoneally or orally. TBA value and aminopyrine demethylase activity were determined in liver microsomal fraction and serum. The results were summerized as following. 1) Body weights of animals administered benzoyl peroxide suspension were decreased while that of oil administered group were increased. 2) The activity of aminopyrine demethylase was generally decreased in animals administered oil suspension of benzoyl peroxide. Furthermore, the marked reduction of the enzyme activity was observed in animals administered benzoyl peroxide intraperitoneally. 3) Generally, microsomal TBA values as well as serum TBA were significantly elevated in benzoyl peroxide group in comparison with the control group. However, the more remarkable increase of serum TBA than microsomal TBA was observed in animals administered orally for 6 days. 4) Specifically, the changing pattern of TBA value was notable in serum rather than in liver microsome by intraperitoneal administration of benzoyl peroxide.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.136-142
• /
• 2018

Additive manufacturing process technology, known as the 3D printing process, is expanding its utilization from simple model realization to commercialized part production based on continuous material development. Recently, research and development have been actively carried out to fabricate lightweight and high-strength parts using polymers, such as polyamide (polyamide), which is a high-strength engineering plastic material. In this study, the Izod impact characteristics were analyzed for polyamide 12 (PA12) materials. For the specimen production, selective laser sintering process technology, which has excellent mechanical properties of finished products, was applied. In addition, PA12 and glass bead reinforced PA12 materials were produced. The specimens were classified according to the production direction on the production platform, and each specimen was subjected to an Izod test at test temperatures of $-25^{\circ}C$, $25^{\circ}C$, and $60^{\circ}C$. As a result, the impact strength of PA12 and glass bead-reinforced PA12 of vertical direction specimens were 48.8% and 16.3% lower than those of the parallel specimens at a $25^{\circ}C$ test temperature and the impact strength of parallel specimens was improved by 46.5% and 20.4% at a test temperature of $60^{\circ}C$ compared to that at $-25^{\circ}C$.

• Applied Biological Chemistry
• /
• v.41 no.6
• /
• pp.437-441
• /
• 1998

The effects of sucrose fatty acid ester (SE, 1% w/w) and glycerin (GL, 1% v/w) additions, storage temperature$(0,\;20\;and\;70^{\circ}C)$, and time $(0{\sim}6\;day)$ on texture properties, hardness(H), cohesiveness(O), chewiness(C) and rheological property(R) of Baikseolgi were studied. The H of Baikseolgi increased sharply in the early stage of storage at 0 and $20^{\circ}C$, while increased gently at $70^{\circ}C$ with increasing storage time. After 6 days of storage, the H of Baikseolgi at $20^{\circ}C$ had a little lower than that at $0^{\circ}C$. However, the H of Baikseolgi at $70^{\circ}C$ was 10.7% of that at $0^{\circ}C$. The addition of GL had greater effect on the reduction of H than that of SE. The H of control, SE and GL additions were 336, 216 and $$174\;g_f, respectively, after 6 days at $70^{\circ}C$. The O of Baikseolgi at $70^{\circ}C$ were higher than those at $0^{\circ}C$. The O of GL added Baikseolgi had the highest value and the second and the third were SE added and control, respectively. The O of Baikseolgi decreased with increasing storage time. The C of Baikseolgi of increased with increasing storage time, which had similar curve patterns to the H of Baikseolgi. Instantaneous stress and equilibrium stress of Baikseolgi decreased with increasing storage temperature. The affection of viscous element increased and that of elastic element decreased with increasing storage temperature.