• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.103-108
• /
• 2003

The effect of equivalence ratio and fuel/air mixing quality on the phase-resolved gas temperatures at different phases of the oscillating pressure cycle was experimentally investigated. An atmospheric pressure, optically accessible and laboratory-scale dump combustor operating on methane with heat release rate of 1.59kW was used. Temperature measurements were made using coherent anti-Stokes Raman spectroscopy (CARS) at several spatial locations for typical unstable combustion conditions. Analysis was conducted using parameters such as phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs). Also the probability on the occurrence of high temperature (over 1900K) was investigated to get the information on the perturbation of equivalence ratio and NOx emission characteristics. It was shown that most of temperature histograms exhibit Gaussian profile which has short breadth of temperature fluctuation at equivalence ratio of 0.6, while beta profile was predominant for the cases of other equivalence ratios (${\Phi}$=0.55, 0.50). The characteristics on the occurrence of high temperature also displayed periodic wave form which is very similar to the pressure signal. And the amplitude of this profile goes larger as the fuel/air mixing quality become poorer. These also provided additional information on the perturbation of equivalence ratio at flame as well as NOx emission characteristics.

• Korean Journal of Psychosomatic Medicine
• /
• v.5 no.1
• /
• pp.97-107
• /
• 1997

As a preliminary step to develop the Daily stress Inventory(DSI) for assessing minor stressors frequently experienced in everyday lift. We examined the reliability and validity of the DSI. The Daily Stress Inventory(DSI), the Beck Depression Inventory(BDI), the State-Trait Anxiety Inventory(STAI), the Social Readjustment Rating Scale(SRRS) and the Minnesota Multiphasic Personality Inventory(MMPI) were administered to 111 college students. Compared with the weekly DSI Event, Impact and I/E ratio scores of the American college students, the weekly event and I/E ratio scores of the Korean college students were significantly higher but weekly Impact score was lower. The internal consistency reliability of the DSI as computed by Cronbach alpha was .98. The DSI I/E ratio scores were significantly correlated with the scores of State Anxiety$({\gamma}=.27)$ and Trait Anxiety${\gamma}=.24)$, but not with BDI scores. And the SSRS scores were not significantly correlated to the DSI Event or Impact and In ratio scores. Significant correlations were revealed between the DSI Impact scores and the Sc and Ma scales of the MMPI. And the correlation between the DSI I/E ratio scores and the L, D, Hy, Pd and Pa scales of the MMPI was also significant. But no significant correlation was found between the DSI Event scores and all the scales of the MMPI. This study suggests that the DSI can be a reliable and valid tool to assess the minor stress frequently experienced in everyday life future study should be directed to obtain normative data based on more varied and larger population. Especially gathering additional evidences for the validity of the DSI using other minor stressor scale will be required.

• Physical Therapy Korea
• /
• v.8 no.2
• /
• pp.55-63
• /
• 2001

For spinal flexibility measurements to be meaningful to clinicians or researchers, they must have a normative information and an understanding of how different variables affect spinal range of motion (ROM). Normal spinal ROM measurements are influenced to differing degrees by many factors. These factors include age, gender, time of day, leisure activities, previous history of low back pain, warming up, and the techniques with which normative data are collected. The additional variables of standing height, ratio of standing height to sitting height, and obesity had not been previously studied extensively and were shown to have a significant effect on flexibility in the sagittal plane. These relationship cannot be explained easily. Thus, the purpose of this study was to determine the relationship between spinal flexibility and individual factors (weight, standing height, and ratio of standing height to sitting height) that influence it. Fifteen healthy subjects between the ages of 20 and 27 years were studied. Two physical therapists measured independently the spinal forward bending ROM in the sagittal plane by Remodified Schober test and Finger-to-floor test. In order to determine the statistical significance of the result the Pearson's correlation was applied at the .05 level of significance. The results of this study were as follows: 1) Significant relationship was not identified between spinal flexibility and weight. 2) Significant relationship was not identified between spinal flexibility and standing height. 3) Significant relationship was not identified between spinal flexibility and ratio of standing height to sitting height.

• Steel and Composite Structures
• /
• v.13 no.6
• /
• pp.501-519
• /
• 2012

As an alternative to current conventional force-based assessment methods, the energy-based seismic performance of a code-designed 20-storey high-rise steel building is evaluated in this paper. Using 3D nonlinear dynamic time-history method with consideration of additional material damping effect, the influences of different restoring force models and P-${\Delta}/{\delta}$ effects on energy components are investigated. By combining equivalent viscous damping and hysteretic damping ratios of the structure subjected to strong ground motions, a new damping model, which is amplitude-dependent, is discussed in detail. According to the analytical results, all energy components are affected to various extents by P-${\Delta}/{\delta}$ effects and a difference of less than 10% is observed; the energy values of the structure without consideration of P-${\Delta}/{\delta}$ effects are larger, while the restoring force models have a minor effect on seismic input energy with a difference of less than 5%, but they have a certain effect on both viscous damping energy and hysteretic energy with a difference of about 5~15%. The paper shows that the use of the hysteretic energy at its ultimate state as a seismic design parameter has more advantages than seismic input energy since it presents a more stable value. The total damping ratio of a structure consists of viscous damping ratio and hysteretic damping ratio and it is found that the equivalent viscous damping ratio is a constant for the structure, while the equivalent hysteretic damping ratio approximately increases linearly with structural response in elasto-plastic stage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.12
• /
• pp.1725-1733
• /
• 2016

Recent findings have shown that microbial nitrogen flow and digestible energy of diets are increased when urea is combined with a slow-release urea (SRU) in diets with a starch to acid detergent fibre ratio (S:F) 4:1. This affect is attributable to enhanced synchrony between ruminal N availability for microbial growth and carbohydrate degradation. To verify the magnitude of this effects on lamb performance, an experiment was conducted to evaluate the effects of combining urea and a SRU in diets containing S:F ratios of 3:1, 4:1, or 5:1 on performance, dietary energetics and carcass characteristics of finishing lambs. For that, 40 Pelibuey${\times}$Katahdin lambs ($36.65{\pm}3kg$) were assigned to one of five weight groupings in 20 pens (5 repetition/treatments). The S:F ratio in the diet was manipulated by partially replacing the corn grain and dried distiller's grain with solubles by forage (wheat straw) and soybean meal to reach S:F ratios of 3:1, 4:1 or 5:1. An additional treatment of 4:1 S:F ratio with 0.8% urea as the sole source of non-protein nitrogen was used as a reference for comparing the effect of urea combination vs. conventional urea at the same S:F ratio. There were no treatment effects on dry matter intake (DMI). Compared the urea combination vs urea at the same S:F ratio, urea combination increased (p<0.01) average daily gain (ADG, 18.3%), gain for feed (G:F, 9.5%), and apparent energy retention per unit DMI (8.2%). Irrespective of the S:F ratio, the urea combination improved the observed-to-expected dietary ratio and apparent retention per unit DMI was maximal (quadratic effect, $p{\leq}0.03$) at an S:F ratio of 4:1, while the conventional urea treatment did not modify the observed-to-expected net energy ratio nor the apparent retention per unit DMI at 4:1 S:F ratio. Urea combination group tended (3.8%, p = 0.08) to have heavier carcasses with no effects on the rest of carcass characteristics. As S:F ratio increased, ADG, G:F, dietary net energy, carcass weight, dressing percentage and longissimus thoracis (LM) area increased linearly ($p{\leq}0.02$). Combining urea and a slow-release urea product results in positive effects on growth performance and dietary energetics, but the best responses are apparently observed when there is a certain proportion (S:F ratio = 4:1) of starch to acid detergent fibre in the diet.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.2
• /
• pp.118-123
• /
• 2013

This study was carried out to select optimal shade materials among four-layered polyethylene (PE) net (FLPN), aluminium-coated PE sheet (APSS), and blue PE sheet (BPSS) in condition of paddy field cultivated 6-year-old ginseng. The order of light-penetrated ratio and air temperature by shade materials was BPSS > APSS > FLPN. Light-penetrated ratio of BPSS before two fold shade was more 3 times and 2 times than that of FLPN and APSS, respectively. Air temperature of BPSS was also higher $1.6^{\circ}C$ and $1.4^{\circ}C$ than that of FLPN and APSS, respectively. BPSS showed good cultural environment because all of light-penetrated ratio and air temperature were become higher in spring and fall season but lower in summer season by additional shade with two-layered PE net. Survived-leaf ratio was highest in BPSS and lowest in FLPN causing a little water leak on a rainy day. Rusty-root ratio was also highest in FLPN because soil moisture content was increased by water leak. The order of root yield was BPSS > APSS > FLPN, and the cause of highest yield in BPSS was higher light-penetrated ratio during spring and fall season, higher survived-leaf ratio, and lower rusty-root ratio than that of APSS and FLPN. BPSS showed highest total ginsenoside content because of high light-penetrated ratio, blue light effect, and the difference in dry matter partitioning ratio such as low taproot ratio, and high lateral root ratio.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.99-107
• /
• 2011

This study is to performed to find the optimum mix proportion of the high strength and self compacting concrete for the above-ground LNG storage tank construction and field application. If LNG storage tank wall thicknesscan be reduced, the construction cost and quality can be improved by using self-compacting high strength concrete with compressive strength 60~80 MPa. For this purpose, low heat cement (Type IV) and class F fly ash are used in concrete mix to control hydration heat, flowability, and viscosity. Mix design variables of unit water, fly ash replacement ratio, water-binder ratio, and fine aggregate ratio are selected and tested for material properties and manufacturing cost of the concrete. Also, fly ash replacement ratio is considered using confined water ratio test. The test results showed that the optimum mix proportion of the self-compacting high strength concrete characteristics are as follows. 1) In case of the concrete with specified compressive strength of 60 MPa, the optimum mix proportion is fly ash replacement ratio of 20% and water- binder ratio of 27~30%. 2) In case of the concrete with the strength of 80 MPa, the optimum mix proportion is fly ash replacement ratio of 10% and water-binder ratio 25%. But unit water and fine aggregate ratio are 165 $kg/m^3$ and $51{\pm}2%$, respectively, regardless of the traget concrete compressive strength range. Also, test results showed that concrete manufacturing cost of 60 MPa and 80 MPa concrete require additional costs of 14~22% and 33%, respectively, compared to the manufacturing cost of 40 MPa concrete. Therefore, application of the self-compacting high strength concrete has proven to be economical in the perspective of the material cost, quality control, and site management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.9-17
• /
• 2016

A purification method was established for high-purity chondroitin sulfate from skate cartilage. Hydrolytic extraction of skate backbone cartilage was investigated with the proteases alcalase and protamex, and the extraction contents of chondroitin sulfate were measured with several physicochemical processes. The yield of extract from skate cartilage with $40^{\circ}Brix$ concentration was 23.3% with 2% alcalase hydrolysis, which was decreased to 8.47% and 3.37% with the first and second additional ethanol purifications, respectively. The yield was 16.62% with one ethanol purification after hydrolysis with a mixture of 1% alcalase and 1% protamex. The content of chondroitin sulfate was measured as 39.88-45.08% with different ratios of ethanol solvent. The content was 42.92% at a solvent ratio of 1:1 with alcalase protease and 45.08% with a ratio of 1:2 using a protease mixture of alcalase and protamex. The molecular weight range of chondroitin sulfate was about 110-310 thousand Da, and the purity of chondroitin sulfate was 24.87-49.92% with a mixture of alcalase and protamex in GPC analysis. The maximum purity of chondroitin sulfate was 53.93% after ultrafiltration. The odor strength of chondroitin sulfate was decreased by 33% and 38% after ethanol purification and additional filtration with activated carbon, respectively. The odor concentration of ammonia and TMA from chondroitin sulfate was decreased by 52.1% and 37.89% with activated carbon filtration and two ethanol purifications, respectively, but it was necessary to eliminate the odor components efficiently using additional physicochemical processes.

• Education of Primary School Mathematics
• /
• v.15 no.2
• /
• pp.159-170
• /
• 2012

Many obstacles have been found in the learning of ratio and rate. The types of epistemological obstacles concern 'terms', 'calculations' and 'symbols'. It is important to identify the epistemological obstacles that students must overcome to understand the learning of ratio and rate. In this respect, the present study attempts to figure out what types of epistemological obstacles emerge in the area of learning ratio and rate and where these obstacles are generated from and to search for the teaching implications to correct them. The research questions were to analyze this concepts as follow; A. How do elementary students show the epistemological obstacles in ratio and rate? B. What is the reason for epistemological obstacles of elementary students in the learning of ratio and rate? C. What are the teaching implications to correct epistemological obstacles of elementary students in the learning of ratio and rate? In order to analyze the epistemological obstacles of elementary students in the learning of ratio and rate, the present study was conducted in five different elementary schools in Seoul. The test was administered to 138 fifth grade students who learned ratio and rate. The test was performed three times during six weeks. In case of necessity, additional interviews were carried out for thorough examination. The final results of the study are summarized as follows. The epistemological obstacles in the learning of ratio and rate can be categorized into three types. The first type concerns 'terms'. The reason is that realistic context is not sufficient, a definition is too formal. The second type of epistemological obstacle concerns 'calculations'. This second obstacle is caused by the lack of multiplication thought in mathematical problems. As a result of this study, the following conclusions have been made. The epistemological obstacles cannot be helped. They are part of the natural learning process. It is necessary to understand the reasons and search for the teaching implications. Every teacher must try to develop the teaching method.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.223-234
• /
• 2016

Two-component epoxy resin is widely used in the cultural heritage restoration field. However according to mixing ratio of resin and hardener, curing property, mechanical strength and chemical structure differ which have possibility to effect the stability of cultural heritage. Result of questionnaire survey shows hands-on workers in the conservation field tend to mix the epoxy resin with his or her eye measurement when the using amount is small or mix additional hardener to shorten the pot life of epoxy resin. This research aims to analyze the curing property, mechanical strength and chemical structure of rapid curing type epoxy resin and medium curing type one depending on relative ratio of 0.25~4 of hardener to resin. When the amount of hardener was 0.5~2 times more than the resin, exothermic heat and curing speed were both increased. In case of included hardener to resin was lower than official ratio, mechanical strength (tensile shear strength, tensile strength and compressive strength) became higher along with active cross-linking bonding of the epoxy resin. Medium curing type epoxy relatively had lower exothermic heat and slower reaction during curing process. It was observed to be put to definite point of mechanical strength under lower content of hardener than official ratio. While, hardener ratio more than twice the resin slowed down the curing greatly and lowered the adhesion strength also. In conclusion, under the lower mixing rate of hardener than official ratio would show relatively fast reaction with similar mechanical strength. Over the official ratio on the other hand, material property drops rapidly. Accordingly, mixing ratio of epoxy resin is expected to be influential to the stability of cultural heritage.