• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.6
• /
• pp.687-699
• /
• 2005

In order to investigate the effect of dietary zinc and phytic acid levels on protein metabolism in rats, male rats of Sprague-Dawley strains weighing approximately $60\~74g$ were fed different diets which contained 0, 0.35 and $1.05\%$ phytic acid each at 3 levels of zinc(0, 30 and 1,500 ppm zinc) for 28 days. Result obtained in this experiment are summarized as follows; 1. Body weight gait food consumption food efficiency ratio and protein efficiency ratio were lower in the rats fed zinc deficient diet(0 ppm zinc) than in those consuming 30 or 1,500 ppm dietary zinc, and the additional effect of phytic acid were not observed in all of then 2. Liver weight was lower in the rats fed 30 ppm zinc diet than in those fed 0 or 1,500 ppm-zinc diet but kidney and spleen weights were lower in the rats fed zinc deficient diet than in those fed 30 or 1,500 ppm-zinc diet Among organs measured only the liver appeared to be influenced by dietary phytic acid: the more the dietary phytic acid, the more the weight of liver, 3. Fecal nitrogen was decreased in the rats fed zinc deficient diet compared with those fed 30 or 1,500 ppm dietary zinc. Urinary nitrogen was increased in the rats fed $1.05\%$ dietary phytic acid compared with those fed 0.35 or $0\%$ dietary phytic acid Nitrogen retention of rat was influenced by neither dietary zinc nor phytic acid. 4. Urea nitrogen was decreased with increasing dietary zinc levels, and creatinine and uric acid levels were increased with increasing dietary zinc concentration or with additional quantity of phytic acid. Uric acid appeared to be influenced by zinc x phytic acid interaction; especially, the presence of phytic acid in the 30 ppm-zinc diet had significant effect on uric acid content. 5. Hemoglobin concentrations and hematocrit ratio were higher in the rats fed 30 ppm dietary zinc than in those fed 0 or 1,500 ppm-zinc diet Serum zinc concentration was increased with increasing dietary zinc levels. The content of total protein albumin and BUN and the ratio of albumin to globulin in serum, and protein content in liver were influenced by neither dietary zinc nor phytic acid.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.752-760
• /
• 2014

This paper proposes a conditional replenishment algorithm (CRA) to improve the visual quality (where spatial resolutions of the left and right views are mismatched) of a hybrid stereoscopic 3DTV that is based on the ATSC-M/H standard. So as to generate an enhanced view, the CRA is to choose the better substitute among a disparity-compensated view with high quality and a simply interpolated view. The CRA generates a disparity map that includes modes and disparity vectors as additional information. It also employs a quad-tree structure with variable block size by considering the spatial correlation of disparity vectors. In addition, it takes advantage of the disparity map used in a previous frame to keep the amount of additional information as small as possible. The simulation results show that the proposed CRA can successfully improve the peak signal-to-noise ratio of a poor-quality view and consequently have a positive effect on the subjective quality of the resulting 3D view.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.130-130
• /
• 2016

Bioinspired hierarchical nanostructures for self-cleaning s-tnwjurface and SERS substrates are investigated. The multi-level hierarchy is combined with CuO nanowire and additional nanoscale structures. CuO nanowire, which has extremely high aspect ratio, serves as a base structure of multi-level hierarchy and additional flower like structures are placed on the CuO nanowires. Since as-fabricated CuO nanostructures are hydrophilic, the surface is coated with perfluorooctyltrichlorosilane in order to change its wetting property to hydrophobic. While those CuO based nanostructures have a sufficient roughness for superhydrophobic characteristics, hierarchical nanoflowers on nanowire structures lead to a self-cleaning surface. Furthermore, flower like nanostructures provide reentrant curvatures, thus enabling oleophobic property. The surfaces has a repellency even for a tiny droplet (10 nL) of low surface tension liquids (~35 mN/m). On the on hands, nanoflowers provide many number of nanoscale gaps. After a thin layer of silver is deposited on the surface of CuO nanostructures, those nanoscale gaps act as hot-spot for surface enhanced Raman scattering (SERS). To analyze SERS enhancement of the surfaces, Raman shift is measured with varying molar density of 4-Mercaptopyridine from mM to pM. From these results, hierarchical CuO nanostructures are suitable for self-maintenance and cost effective SERS sensing applications.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.5 s.149
• /
• pp.586-596
• /
• 2006

A 3-dimensional FDLB model with additional internal degree of freedom is applied for diatomic gases such as air, in which an additional distribution function is introduced. Direct simulations of aero-acoustic by using the applied model and scheme are presented. Speed of sound is correctly recovered. As typical examples, the Aeolian tone emitted by a circular column is successfully simulated even very low Mach number flow. Acoustic pressure fluctuations with the same frequency of the Karman vortex street compared with the pressure fluctuation around a circular column is captured. Full three-dimensional acoustic wave past a compact block like pentagon, furthermore, is also emitted in y direction as dipole like sound.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.158.2-158.2
• /
• 2011

DME is acronym of dimethyl ether, which is spotlighted as an ideal fuel to produce hydrogen due to its high hydrogen/carbon ratio, high energy density and easiness to carry. In this research, we calculated thermodynamic hydrogen (or syngas) yield from DME autothermal reforming and compared to other fuels. The reforming efficiency was about 80% above $700^{\circ}C$. Lower OCR has higher reforming efficiency but, it requires additional heat supply since the reactions are endothermic. SCR has no significant effect on the reforming efficiency. The optimized condition is $700^{\circ}C$, SCR 1.5, OCR 0.45 without additional heat supply. Comparing to other commercial gaseous fuels (methane and propane), DME has higher selectivity of $H_2O$ and $CO_2$ than the others due to the oxygen atom in the molecule. To apply DME autothermal reforming to real system, a proper catalyst is required. Therefore, it is performed the experiment comparing various novel metal catalysts based on CGO. Experiments were performed at calculated condition. The composition of product was measured and reforming efficiency was calculated. The catalysts have similar efficiency at high temperature(${\sim}800^{\circ}C$) but, CGO-Ru has the highest efficiency at low temperature ($600^{\circ}C$).

• Journal of Embryo Transfer
• /
• v.11 no.3
• /
• pp.301-307
• /
• 1996

This study was carried out to produce twin calves by embryo transfer in Hanwoo and investigate the pregnancy and twin rate by recipient's conditions. All recipients were bred at estrus by artificial insemination with Hanwoo semen and then transfered an additional embryo produced in vivo or in vitro to tbe uterine horn contralateral to the corpus luteum on Day 7. The results obtained were as follows ; 1. The pregnancy rate was higher in young recipients of 3 years (68.8%) than in old ones of 10 years and greater(36.4%). And for CL size pregnancy rate was 57.9, 45.4 and 60.1% in large, medium and small size of CL of recipients, respectively. 2. 447recipients were transferred an additional embryos at 7th day after Al and average pregnancy rate was 57.5% and twin production rate was 22.2%. 3. Average pregnancy and twin production rate by direct transfer methods of frozenthawed IVF embryos was 56.0 and 16.7%. 4. The ratio of male to female twin in a total of 55 twin pairs was 54.6%, and average gestation lengths of male to female and female to female twin were 280.6$\pm$5.4 and 279.715.4 days, respectively. Average birth weight of twins was beavior in male and male twin(23.2i5.8kg) than in male and female twin(20.5$\pm$2.6kg).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.325-330
• /
• 2011

A rotor overlap technique was adapted to improve the performance of a axial turbine. The technique secured sufficient flow passage by additional height at the rotor tip and hub. especially in a supersonic turbine, the technique reduced the chance of chocking in the rotor passage, and made to be satisfied the design pressure ratio. However, the technique also made additional losses, like a pumping loss, expansion loss, etc. Therefore, a optimization technique was appled to maximize the improvement of the turbine performance. An approximate optimization method was used for the investigation to secure the computational efficiency. The design variables was shape factors of a rotor overlap. Results indicated that a significant improvement in turbine performance can be achieved through the optimization of the rotor overlap.

• International Journal of Ocean System Engineering
• /
• v.3 no.4
• /
• pp.188-208
• /
• 2013

The motion response of floating structures should be adequately low to permit the operation of rigid risers along with dry well heads. Though Spar platforms have low heave responses under lower sea state, could become unacceptable in near resonance region of wave periods. Hence the hydrodynamic response, heave in particular, must be examined to ensure that it is minimized. To reduce heave motions, external damping devices are introduced and one such effective damping device is heave plate. Addition of heave plate can provide additional viscous damping and additional added mass in the heave direction which influence the heave motion. The present study focuses on the influence of heave plate on the hydrodynamic responses of Classic Spar in regular waves. The experimental investigation has been carried out on a 1:100 scale model of Spar with single and double heave plates in regular waves. Numerical investigation has been carried out to derive the hydrodynamic responses using ANSYS AQWA. The experimental results were compared with those obtained from numerical simulation and found to be in good agreement. The influence of disk diameter ratio, wave steepness, pretension in the mooring line and relative spacing between the plates on the hydrodynamic responses of Spar are evaluated and presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.439-446
• /
• 2005

The theoretical method is developed to investigate the vibration characteristics of the combined cylindrical shells with an annular plate joined to the shell at any arbitrary axial position. The structural rotational coupling between shell and plate is simulated using the rotational artificial spring. For the translational coupling, the continuity conditions for the displacements of shell and plate are used. For the uncoupled annular plate, the transverse motion is considered and the in-plane motions are not. And the additional transverse and in-plane motions of the coupled annular plate by shell deformation are considered in analysis. Theoretical formulations are based on Love's thin shell theory. The frequency equation of the combined shell with an annular plate is derived using the Rayleigh-Ritz approach. The effect of inner-to-outer radius ratio, axial position and thickness of annular plate on vibration characteristics of combined cylindrical shells is studied. To demonstrate the validity of present theoretical method, the finite element analysis is performed.

• Journal of Oriental Neuropsychiatry
• /
• v.21 no.2
• /
• pp.141-155
• /
• 2010

Objectives : This study was performed to develop a standard instrument of oriental medical evaluation for hwa-byung. Methods : The advisor committee on this study was organized by 17 neuropsychiatry professors of oriental medical colleges. The items and structure of the instrument were quoted from the instrument of pattern identification for hwa-byung. We took consultation twice from the advisor committee and we also took additional advices by e-mail. Results : We discriminated between bian-zheng and su-zheng from the answers of the advisor committee. We got the mean weight of each symptom and sign from the answers of the advisor committee. We got the final weight from the combination of the ratio of bian-zheng to the number of all answers of the advisor committee and mean weight. Conclusions : The instrument of oriental medical evaluation for hwa-byung was developed through experts' discussion. If the validity and reliability of this instrument is confirmed through additional clinical trial, the instrument of oriental medical evaluation for hwa-byung is expected to be applied to the subsequent research.