• 한국식품영양학회지
• /
• 제31권6호
• /
• pp.873-882
• /
• 2018

This research is about the quality characteristics of white bread mixed with varying ratios of Seomcho powder, such as 1%, 3%, 5%, and 7% (Spinacia oleracea L.). The pH level of dough decreased as more Seomcho powder (Spinacia oleracea L.) was added, and 7% addition recorded the lowest pH. The fermentation power of dough expansion decreased as the additional ratio increased in both the first and second proofing, and it was negatively correlated to the fermentation time factor. The moisture content of bread decreased as the addition ratio increased. The bread volume became smaller as the addition ratio increased, but it correlated negatively with its specific volume. The color of the crumb, the lightness and redness decreased in comparison to the control, but the yellowness increased. The total amino acid contents increased as the addition ratio increased, and glutamic acid was positively correlated to the additional ratio. The total free amino acids increased as the additional ratio increased, but cysteine levels were high at 5% and 7% additional ratio. The textural characteristics of the bread, springiness and cohesiveness were lower than the control, but gumminess, brittleness, and hardness were higher than the control. The adhesiveness was realized at 7% additional ratio.

• 한국식품조리과학회지
• /
• 제30권4호
• /
• pp.454-462
• /
• 2014

This study aimed at the optimization and development of rice snack by response surface methodology (RSM). The effect of rice soaking time and additional ratio of soybean milk on physicochemical properties and sensory evaluation of dried rice flour for non-fried snack was studied. After soaking for 0 to 12 days, Baekjinju rice was milled and then air-dried. A quadratic model was selected for weight, volume, hardness, taste and appearance. Two-factor interaction model was selected for expansibility, color and overall preference. A linear model was selected for yellowness and flavor. Weight, hardness and appearance were increased and decreased thereafter as rice soaking time increased, but the volume was reversed. Expansibility, color, taste and flavor were decreased as rice soaking time increased, but yellowness was reversed. Weight and overall preference decreased as additional ratio of soybean milk increased, but volume, expansibility and yellowness were reversed. Hardness, taste and appearance were increased after initial decrease as additional ratio of soybean milk increased, color and flavor were not changed by additional ratio of soybean milk. The optimum conditions of each factor were set to where the rice soaking time and additional ratio of soybean milk were at their minimum. Weight, volume, expansibility, yellowness, hardness, color, taste, flavor, appearance and overall preference were established at maximum level where the objective of the optimum was in level. Our data indicated the statistically predicted values of the highest desirability was 1.24 day of rice soaking time and 15.80% of additional ratio of soybean milk.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.155-158
• /
• 2009

During the construction project period, a lot of change orders happen in the design and construction stage Especially, The change order during construction stage causes the huge construction cost increase and duration delay. Accordingly, research on the change order of the construction stage is being progressed relatively active in the design stage, but the design changes are rarely made. In the design stage, the owner has to pay a design addition cost when change order due to the demands of owner happens. However Korea has not the specific standard about design additional cost in design stage. Therefore, this study analyzes problems of design additional cost estimation methods through the case study, and then indicates the method that the ratio distributes to details dividing design tasks and the method of the PM(Project Management). Eventually, this study expects to minimize claim related the design additional cost in design stage.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.589-596
• /
• 1998

Experimental studies are investigated for RC column retrofitting under cyclic load. Design considerations are jacketing of steel plate of carbon fiber with epoxy bonding, use of unbonded plate, additional concrete grouting, ratio of additional longitudinal steel reinforcement and longitudinal configuration of additional ties. Investigated results are 1) jacketing and additional reinforcements are effective for strengthening, 2) use of additional grouting is less effective with respect to increased section. Future studies are needed to evaluate the requirements about additional reinforcements for member stress level, 3) bond between original and additional grout concrete.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.225-234
• /
• 2019

The purpose of this paper is to analyze the additional construction cost of G-SEED certification for domestic office building reflecting the latest standard(G-SEED 2016-2), and to derive cost impact by category and level. Therefore, it is intended to provide quantitave cost data according to G-SEED certification at the planning phase of the project, estimate the additional construction cost per level according to G-SEED Certification of similar project to be carried out in the future, and encourage G-SEED certification by supporting the decision of the owners. Method: The Process and method of this study are summarized in five steps, 1) Review of previous research, 2) Selection of target project, 3) Scenario setting by level, 4) Additional construction cost for each evaluation category, 5) Extraction of additional construction cost ratio by level. Result: This paper analyzed the cost impact by deriving the additional construction cost of detailed category for level improvement according to the revised G-SEED certification(G-SEED 2016-2). In conclusion, an additional construction cost(ratio) of G-SEED projects to the reference building is drawn as good level; 157,426,241 KWN(+0.43%), very good level; 321,907,802 KWN(+0.88%), excellent level; 999,371,478 KWN(+2.74%), and outstanding level; 1,467,047,718 KWN(+4.02%).

• 동아시아식생활학회지
• /
• 제11권4호
• /
• pp.295-304
• /
• 2001

This study was conducted to investigate the cooking properties of noodles made from composite flour blended with green tea powder. As the ratio of green tea powder increased, development time was longer than that of the control. The stability of dough showed higher value than the control except 2% addition group. The highest viscosity was at the 4% addition group. but 2% addition group showed the lowest viscosity. As the additional ratio of green tea powder was increased. the volume expansion ratio was increased, but water soluble solid matters contents in all addition groups had a lower level than that of the control. Also, the yellowness level of noodle was increased, but the brightness, redness and color and flavor acceptability was decreased, as the additional ratio was increased. However. 2~4% addition group of green tea powder had a similar acceptability profile to that of the control group.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.42-49
• /
• 2013

Recently, the attention to renewable energy has increased globally because of the environmental issue and the global energy crisis. Accordingly, south korea is focused on increasing the renewable energy usage. And the government enforced a law to the public buildings to install the renewable energy facilities. In this study, the building to evaluate renewable energy consumption and supply ratio was selected. This building has 9.79% of renewable energy supply ratio by PV system. In this study, the method for improving renewable energy supply ratio was analyzed using additional PV system. And The 5 methods to increasing electricity were evaluated. The method of increase 4.24 times PV arrays area is most efficient way to increase the renewable supply ratio. The case 1, show that the increasing renewable energy supply ratio of 39.2% compared to exsiting PV system. The result of the above, consider the additional supply of renewable energy.

• Communications for Statistical Applications and Methods
• /
• 제24권3호
• /
• pp.255-269
• /
• 2017

This article explores the analysis of longitudinal surveys in which same units are investigated on several occasions. Multivariate exponential ratio type estimator has been proposed for the estimation of the finite population median at the current occasion in two occasion longitudinal surveys. Information on several additional auxiliary variables, which are stable over time and readily available on both the occasions, has been utilized. Properties of the proposed multivariate estimator, including the optimum replacement strategy, are presented. The proposed multivariate estimator is compared with the sample median estimator when there is no matching from a previous occasion and with the exponential ratio type estimator in successive sampling when information is available on only one additional auxiliary variable. The merits of the proposed estimator are justified by empirical interpretations and validated by a simulation study with the help of some natural populations.

• 대한방사선기술학회지:방사선기술과학
• /
• 제15권2호
• /
• pp.3-9
• /
• 1992

In an experiment using chest radiography, the authors measured the scattered ray content ratio and exposed skin dose giving varieties to the object thickness, tube voltage, additional filters and gird. The result was as follows, In the 80 kV the required mAs for the density 1.8 was $10{\sim}20$ times as much as in the 140 kV, and when 10 : 1 grid was used the required mAs was $3{\sim}5$ times as much as when grid was not used. Under the same tube voltage the scattered ray content ratios were increased as the additional filter thickness became thicker. And when 10 : 1 grid was used the ratio could be decreased $2{\sim}5$ times as much as when grid was not used. Skin doses exposed to the patients were increasing as the thickness of the object became thicker, and were decreasing as filters became thicker while showing slow the decreasing effects above the 1/8 VL. And when the grid was used skin doses were increased $2{\sim}4$ times as much as when not used. In order to improve the image qualities while reducing the exposures in the chest radiography, the authors suggest followings. The additional filters up to the 1/2 VL will be suitable according to the thickness of the objects in the 80kv, while the 10 : 1 grid and additional filter of 1/8 VL will be suitable in the 140 kV.

• 한국안광학회지
• /
• 제20권3호
• /
• pp.341-347
• /
• 2015

목적: 가입렌즈 도수 변화에 따른 반응 AC/A비와 프리즘 굴절력 변화에 따른 CA/C비를 측정하고, 이 두 변수와 PD 및 상대조절력과의 상관관계, 반응 AC/A비의 역수와 CA/C비 사이의 평균차이를 비교하여 임상에서 굴절력 및 프리즘 처방의 자료로 활용하고자 한다. 방법: 20대 대학생(평균 $22.62{\pm}2.84$세) 62명(남 50명, 여12명)을 대상으로 주시거리 40 cm에서 하웰시표(Howell card)와 개방형굴절력계(Nvision-K 5001, Shin nippon)를 이용하여 가입렌즈 도수 변화에 따른 반응 AC/A비를 측정하였고, CA/C비는 Wesson fixation card(WFC Bernell, USA) 이면의 DOG시표와 개방형굴절력계를 사용하여 프리즘 굴절력 변화에 따른 CA/C비를 측정하였다. 결과: 가입렌즈 도수 변화에 따른 조절반응량이 프리즘 굴절력 변화에 따른 조절반응량보다 통계적으로 유의한 차이가 크게 나타났다. 동공간 거리와 반응 AC/A비의 설명변량 $R^2=0.025$으로 나타났으며, PD와 CA/C비는 설명변량 $R^2=0.009$으로 나타났다. 상대조절력과 반응 AC/A비의 설명변량 $R^2=0.064$으로 나타났으며 상대조절력과 CA/C비의 설명변량 $R^2=0.321$로 상대조절력과의 예측가능한 상관관계가 있는 것으로 나타났다. 반응 AC/A비와 CA/C비의 설명변량 $R^2=0.126$으로 낮은 상관관계가 있는 것으로 나타났다(p=0.000). 반응 AC/A비의 역수와 CA/C비 사이의 평균차이는 $0.12{\pm}0.06D/{\Delta}$로 통계적으로 유의한 차이를 보였다(p=0.000). 결론: 상대조절력과 CA/C비의 상관관계는 상대조절력이 높은 사람일수록 폭주자극에 대한 폭주성 조절반응량이 큰 것으로 나타났다. 반응 AC/A비의 역수와 CA/C비는 통계적으로 유의한 차이를 보이므로 독립적인 변수로 임상에서 낮은 AC/A비를 가진 환자라도 높은 CA/C비를 가질 수 있다. 이에 양안시 이상에서 프리즘을 처방 할 경우 AC/A비가 정상범위라 하더라도 CA/C비는 다를 수 있어 반드시 조절반응량을 고려한 처방이 되어야 한다.