• 성인간호학회지
• /
• 제15권2호
• /
• pp.267-277
• /
• 2003

Purpose: The purpose of this study was to evaluate the applicability of braden scale to assess pressure ulcer risk patients and to identify additional risk factors of pressure sores in an neurologic intensive care unit. Method: The subjects of this study were 66 patients in neurologic intensive care units. Data was prospectively collected from Sep. to Dec., 2002. Data were analyzed by mean, percentage, t-test, chi-square, discriminant analysis using Spss pc+. Result: The results of this study were as follows: 1) There was a significant difference between scoring of braden scale and pressure ulcer development. The subscales that predicted pressure ulcer development using braden scale only were sensory perception, moisture, mobility, friction & shear. By using these subscales, sensitivity was 86.7%, and specificity was 61.1%, and total hit ratio was 72.7%. 2) Additional pressure ulcer risk factors which showed significance for discriminating two group were protein, albumin, gender, level of consciousness, pattern of bowel elimination. By using the combination of these additional risk factors in addition to the braden scale, total hit ratio increased to 84.8%. Conclusion: This data suggest that albumin, protein, gender, level of consciousness, pattern of bowel elimination in addition to the braden scale should be included in the pressure sore assessment tool.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.67-82
• /
• 2004

The purpose of this study was to evaluate the function and the safety of an additional weight shoe developed for the improvement of aerobic capacity, and to improve some problems found by subject's test for an additional weight shoe. The subjects employed for this study were 10 college students. 4 video cameras, AMTI force platform and Pedar insole pressure distribution measurement device were used to analyze foot motions. The results of the study were as follows: 1 The initial achilles tendon angle and initial rearfoot pronation angle of an additional weight shoe during walking were 183.7 deg and 2.33 deg, respectively, and smaller than a barefoot condition. Maximum achilles tendon angle and the angular displacement of achilles tendon angle were 185.35 deg and 4.21 deg respectively, and smaller than barefoot condition. Thus rearfoot stability variables were within the permission value for safety. 2. Maximal anterior posterior ground reaction force of additional weight shoe was appeared to be 1.01-1.2 B.W., and was bigger than a barefoot condition. The time to MAPGRF of an additional weight shoe was longer than a barefoot condition. Maximal vertical ground reaction force of additional weight shoe was appeared to be 2.3-2.7 B.W., and was bigger than a barefoot condition in propulsive force region. But A barefoot condition was bigger in braking force region. The time to MVGRF of an additional weight shoe was longer than a barefoot condition. 3. Regional peak pressure was bigger in medial region than in lateral region in contrast to conventional running shoes. The instant of regional peak pressure was M1-M2-M7-M4-M6-M5 -M3, and differed form conventional running shoes. Regional Impulse was shown to be abnormal patterns. There were no evidences that an additional weight shoe would have function and safety problems through the analysis of rearfoot control and ground reaction force during walking. However, There appeared to have small problem in pressure distribution. It was considered that it would be possible to redesign the inner geometry. This study could not find out safety on human body and exercise effects because of short term research period. Therefore long term study on subject's test would be necessary in the future study.

• 한국항공우주학회지
• /
• 제50권5호
• /
• pp.339-347
• /
• 2022

하이브리드 로켓의 후연소실(post chamber)은 액화된 연료의 추가적 연소를 유도하여 엔탈피 상승으로 이어지도록 한다. 후연소실이 있는 하이브리드 로켓에 파라핀 왁스를 연료로 사용하는 경우, 연소초기에만 비정상 연소 압력진동이 관찰된다. 본 연구는 비정상 연소 압력진동의 발생과 액적의 추가적 연소 사이의 상관관계를 확인하는 것을 목적으로 하고 있다. 이를 위해 후연소실 연소를 가시화하고 POD 기법을 활용한 이미지 분석을 수행하였다. 또한 모드 재구성을 통해 액적의 거동을 포함하고 있는 모드를 분리하여 비정상적인 연소압력의 진동과 액적의 연소 사이의 상관관계를 조사하였다. 일련의 실험에서는 후연소실로 유입되는 액화 연료량과 액적발생을 조절하여 비정상 연소압력 진동의 변화를 유도하였다. 실험결과에 의하면 파라핀 왁스의 연소 초기에만 관찰되는 비정상 연소압력 진동은 후연소실에서 발생하는 액적의 추가적인 연소가 그 발생원인임을 알 수 있다.

• Composites Research
• /
• 제24권5호
• /
• pp.23-28
• /
• 2011

본 논문에서는 필라멘트 와인딩 시 장력에 의해 복합재료에 발생한 압력 정보를 이용하여 동시경화법으로 제조된 T800 탄소섬유/에폭시 복합재료-알루미늄 단면겹치기 접착조인트의 접착강도를 부가압력의 크기에 따라 측정하였다. 실험시편은 오토클레이브 진공백 성형을 통해 성형압력 (절대압력 0.1MPa, 0.3MPa, 0.7MPa)을 조절하여 제작하였다. 접착강도를 측정하기 위하여 인장실험이 실시되었으며, 필라멘트 와인딩 공정에 의해 제조된 Type III 수소저장용가의 복합재료-알루미늄 라이너의 계면 접착강도를 측정하기 위해 단면겹치기 접착조인트의 접착부에 일정한 압력을 가해줄 수 있는 압력부가 장치를 설계하였다. 적층된 복합재료에 가해지는 부가압력이 접착강도에 미치는 영향을 확인하기 위해 서로 다른 세 종류의 부가압력 (절대압력 0.1MPa, 0.3MPa, 0.7MPa)을 시편에 부가하여 접착강도를 측정하고, 그 결과를 비교하였다.

• 대한조선학회지
• /
• 제7권1호
• /
• pp.1-12
• /
• 1970

The propeller induced pressure fluctuation around a ship's stern is one of the interesting problems from viewpoints of the noise and vibration. Most of the experimental works on the subject employ pressure transducer attached on hull surface near the propeller. In the technique, the measured pressure includes the hydrodynamic pressure transducer attached, if they exit. Hence, the separation of the additional pressure due to vibration from the measured pressure is essential for the determination of true values of the propeller induced pressure. In this paper, to contribute to the separation method, the author investigated the additional hydrodynamic pressure as below, based on the numerical calculation. (1) Hydrodynamic pressure on the body surface of two dimensional cylinders of some mathematical sections such as ellipse, rectangle, Lewis form of hypotrocoidal charactor and curvilinear-element section with chines oscillating vertically at high frequency in a free surface. (2) Hydrodynamic pressure on the surface of the shell plate in local vibration in an ideal fluid.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2757-2762
• /
• 2007

A cyclone design concept named Convex cyclone was developed to reduce pressure losses. Contrary to conventional cylinder-on-con type cyclone, inner wall of Convex cyclone are defined with a continuous curve and it has convex shape body. The discontinuity of inner diameter variation rate of cylinder-on-con type cyclone cause additional pressure loss. Continuous wall of Convex cyclone prevent additional pressure loss. In order to verify Convex cyclone design concept, we make a comparative experiments between Stairmand HE and Convex cyclone. Experimental Convex cyclone designed based on Stairmand HE model, and inner wall are defined with circular arch. The experimental result clearly shows that Convex cyclone can achieve maximum 50% pressure loss reduction with a few percent of collection efficiency drop. In addition, the experimental results indicated the existence of optimum convexity, minimum pressure loss, of cyclone wall.

• International Journal of Fluid Machinery and Systems
• /
• 제3권3호
• /
• pp.227-234
• /
• 2010

Numerical analyses have been performed to investigate the effects of geometric parameters of a straight groove micromixer on mixing performance and pressure drop. Three-dimensional Navier-Stokes equations with two working fluids, water and ethanol have been used to calculate mixing index and pressure drop. A parametric study has been carried out to find the effects of the number of grooves per cycle, arrangement of patterned walls, and additional grooves in triangular dead zones between half cycles of grooves. The three arrangements of patterned walls in a micromixer, i.e., single wall patterned, both walls patterned symmetrically, and both walls patterned asymmetrically, have been tested. The results indicate that as the number of grooves per cycle increases the mixing index increases and the pressure drop decreases. The microchannel with both walls patterned asymmetrically shows the best mixing performance among the three different arrangements of patterned walls. Additional grooves confirm the better mixing performance and lower pressure drop.

• 한국주조공학회지
• /
• 제19권5호
• /
• pp.403-409
• /
• 1999

Mg-Zn-Zr ternary alloys containing 6wt% Zn and (0, 0.4, 0.6)wt% Zr, which is added for grain refinement, can be cast into complex shape by squeeze casting. The influence of Zn and Zr as additional elements on microstructure and mechanical characteristics is investigated by OM, SEM, WDX, XRD and microvickers hardness measurement. The microstructure of Mg-Zn-Zr alloys consists of primary ${\alpha}-Mg$ and MgZn eutectic compound between dendrites. The grain size is decreased from $136{\mu}m$ to $97\;{\mu}m$ by Zr addition, resulting in that the hardness is increased from 42Hv to 59Hv. Furthermore, the grain size is changed to $83{\beta}$ and the hardness is increased to 65Hv by additional infiltration pressure. These results indicate that the Zr addition and additional infiltration pressure are effective for grain refinement acting as an important factor to increase the hardness. The increment in hardness by the Zr addition is slightly larger than that by the additional infiltration pressure.

• 한국정밀공학회지
• /
• 제26권8호
• /
• pp.112-118
• /
• 2009

A pressure rise is generated while air bearing stages are moving in high vacuum environment. This study analyzed this pressure rise phenomenon theoretically and verified it experimentally using two different kinds of stages - linear and rotary air bearing stages. Results indicate that the pressure rise was caused by additional leakage resulting from stage velocity, along with adsorption and outgassing of gas molecules from the guide rail surface. Though tilting of the stage due to acceleration and deceleration reached several micrometers, it had a negligible effect on pressure rise because the tilting time was very short. Therefore, a rotary air bearing stage showed much less pressure rise than a linear stage because the rotary stage theoretically has nothing to do with the above causes. Additional leakage caused by stage velocity was inevitable if the stage had movements, but pressure rise caused by adsorption and outgassing could be suppressed by improving the surface quality to reduce real surface area, and by coating the guide rail surface with titanium nitride (TiN) which has less adhesion probability of gas molecules. The results also indicate that the pressure rise increased when the air bearing stage operated under high vacuum conditions.

• Restorative Dentistry and Endodontics
• /
• 제35권4호
• /
• pp.285-294
• /
• 2010

본 연구의 목적은 흰 쥐의 상악 대구치를 발거한 후 치주인대세포를 $0^{\circ}C$/2 MPa고압-저온하에 1주간 보관시켜 MTT, WST-1 검색법을 이용하여 측정한 치주인대세포의 활성도를 저속 냉동법(No Additional Pressure, 2, 3 MPa), 급속 냉동법(No Additional Pressure, 2 MPa), $-5^{\circ}C$/90 MPa초고압 저온보존법과 비교하여 평가하는 것이다. 생후 4주된 암컷 Sprague-Dawley계 흰쥐의 상악 좌우 제1, 2대구치를 발거하여 각 군 당 12개의 쥐 치아를 MTT, WST-1 검색에 이용하였다. 실험군은 9개군으로 대조군은 즉시 발치군이며, 각각 3 MPa, 2 MPa, No Additional Pressure (NAP)의 압력을 가한 후 $4^{\circ}C$에서 $-35^{\circ}C$까지 $-0.5^{\circ}C$/min 속도로 서서히 냉동시킨 뒤 $-196^{\circ}C$에 냉동한 저속 냉동군, 발치 후 동해방지제 처리과정을 거쳐 각각 2 MPa, NP의 압력을 가한 후, $-196^{\circ}C$의 액화질소에 넣어 냉동한 급속 냉동군, 발치 후 각각 2MPa,NP의 압력을 가한 후, $0^{\circ}C$에 보관한 저온 보존군, $-5^{\circ}C$/90 MPa의 초고압 저온 보존군으로 나누었다. 보존액은 F medium을 사용했으며 동해방지제로 10% dimethylsulfoxide (DMSO)를 사용하였다. 치근면을 단위면적으로 표준화하기 위해 MTT, WST-1 측정값을 Eosin 염색 후 530 nm에서 측정한 흡광도 값으로 나누었다. 통계 분석을 위해 one way ANOVA를 시행하였으며 사후 검정으로는 Tukey HSD 방법을 사용하였고 결과는 다음과 같다. 1. MTT 검색법 및 WST-1 검색법 결과 $0^{\circ}C$/2 MPa 고압 저온 보존군이 즉시 발치군보다 세포 활성도가 낮았으나 통계적 유의차는 없었으며, 저속 압력 냉동군(NP, 2 MPa, 3 MPa)과, 급속 압력 냉동군(NP, 2 MPa), 저온보존군($0^{\circ}C$/NP), 초고압 저온 보존군($-5^{\circ}C$/90 MPa)보다 통계적으로 유의차있게 높은 세포 활성도를 나타내었다(p < 0.05). 2. MTT검색법 및 WST-1 검색법 결과 $-5^{\circ}C$/90 MPa 초고압 저온 보존군이 가장 낮은 세포 활성도를 나타내었으며, MTT 검사 결과에서는 모든 군에 대해 통계적으로 유의성 있는 결과를 보였다(p < 0.05). 위의 결과를 통해, $0^{\circ}C$/2 MPa (20기압)의 고압-저온 보존법이 다른 급속 냉동 보관법(2 MPa, NAP)이나 저속냉동보관법(3, 2 MPa, NAP), $-5^{\circ}C$/90 MPa 초고압 저온 보존법에 비해 우수한 쥐 치아의 치주인대세포의 활성도를 보여 차후 치아의 재이식시 치아보관을 위한 방법으로의 가능성을 제시하였다.