• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.261-273
• /
• 2004

이 연구에서는 경제적이고 실용적인 지반의 동적물성치 계측 기술 개발을 위해 인홀시험법을 연구하였다. 이번 연구에서는 개발한 인홀 장비는 NX 크기의 검측공에서 사용할 수 있고 맨손으로 다룰 수 있을 정도로 작고 가볍다. 그리고 기존의 인홀 장비를 보다 편리하게 개량하였다. 또한, 인홀 시험에 있어서 최적의 댑퍼를 개발하였다. 이 장비는 여러 현장에서 크로스홀 시험과 인홀 시험을 통해 성능을 검증하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.407-414
• /
• 2004

Interfacial properties between rock mass and shotcrete play a significant role in the transmission of loads from the ground to shotcrete. These properties have a major effect on the behaviours of rock mass and shotcrete. They, however, have merely been assumed in most of numerical analyses, and little care has been taken in identifying them. This paper aimed to identify interfacial properties including cohesion, tension, friction angle, shear stiffness, and normal stiffness, through direct shear tests as well as interface normal compression tests for shotcrete/rock cores obtained from a tunnel sidewall. Mechanical properties such as compression strength and elastic modulus were also measured to compare them with the time-dependent variation of interfacial properties. Based on experiments, interfacial properties between rock and shotcrete showed a significant time-dependent variation similar to those of its mechanical properties. In addition, the time-dependent behaviours of interfacial properties can be well regressed through exponential and logarithmic functions of time.

• 한국과학교육학회지
• /
• 제19권2호
• /
• pp.266-274
• /
• 1999

본 연구에서는 협동적인 CAI와 개별적인 CAI가 중학생들의 과학 개념, 학업 성취도, 수업 환경에 대한 인식, 그리고 학습동기에 미치는 효과를 조사하였다. 중학교 3개 학급을 대상으로 분자 운동 단원에 대해 5차시 동안 협동적 CAI, 개별적 CAI, 전통적 수업을 실시하였다. 분석 결과 개념, 수업 환경에 대한 인식, 학습동기 검사에서 협동학습 집단의 평균이 전통적 수업 집단에 비해 유의미하게 높았으며, 개념의 파지 검사에서 협동학습 집단의 개념 이해도가 더 높게 나타났다. 또한, 개념의 파지 및 학습동기 검사에서 수업 처치와 사전 성취 수준 사이의 상호작용 효과가 있었다. 이에 대한 교육학적 함의를 논의하였다.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2845-2852
• /
• 2000

When welding a car frame with one spot welding there are same limitations because many parts of it cannot be simplified by one spot welding alone. It is presented two spot welding model for the description of the spot welding which is usually used in a car frame structure. This study primarily covers fatigue behavior taking spot welded SPCC(Steel plate carbon C) with different ungget intervals as a tension shear specimen. It was prepared that intervals between two nuggets are varied as 9mm, 14mm, and 20mm respectively. The tensile tests and fatigue tests were executed to know the mechanical properties under static and fatigue load condition. In addition, the relationship between fatigue life and nugget intervals was illustrated by finite element method.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1910-1916
• /
• 2000

The five classes of the thermally aged CF8M specimen are prepared using an artificially accelerated aging method. Namely, after the specimens are held for 100, 300, 900, 1800, and 3600hrs at 430$^{\circ}C$ respectively, the specimens are water-cooled to room temperature. The impact energy variations are measures for both the aged and virgin specimens through the Charpy impact tests in addition to the microstructure observation, tensile, hardness and fatigue crack growth tests. From the present investigation the following results are obtained : 1) The difference among the thermally degraded specimens can be distinguished through their microstructures, 2) Hardness and tensile strength are increased to 300hrs, degradation specimen, while elongation and reduction area are decreased to 3600hrs degradation specimen, and impact energy is decreased to 1800hrs degradation specimen, 3) The FCG rates for thermally degraded specimens are larger than that of the virgin specimen.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.2074-2082
• /
• 2000

In this study, to investigate and to predict the crack growth behavior under variable amplitude loading, crack growth tests are conducted on 7075-T6 aluminum alloy. The loading wave forms are generated by normal random number generator. All wave forms have same average and RMS(root mean square) value, but different standard deviation, which is to vary the maximum load in each wave. The modified Forman's equation is used as crack growth equation. Using the retardation coefficient D defined in previous study, the load interaction effect is considered. The variability in crack growth process is described by the random variable Z which was obtained from crack growth tests under constant amplitude loading in previous work. From these, a statistical model is developed. The curves predicted by the proposed model well describe the crack growth behavior under variable amplitude loading and agree with experimental data. In addition, this model well predicts the variability in crack growth process under variable amplitude loading.

• Geomechanics and Engineering
• /
• 제5권3호
• /
• pp.263-281
• /
• 2013

Geotextiles and geogrids have been in use for several decades in variety of geo-structure applications including foundation of embankments, retaining walls, pavements. Geocells is one such variant in geosynthetic reinforcement of recent years, which provides a three dimensional confinement to the infill material. Although extensive research has been carried on geocell reinforced sand, clay and layered soil subgrades, limited research has been reported on the aggregates/ballast reinforced with geocells. This paper presents the behavior of a railway sleeper subjected to monotonic loading on geocell reinforced aggregates, of size ranging from 20 to 75 mm, overlying soft clay subgrades. Series of tests were conducted in a steel test tank of dimensions $700mm{\times}300mm{\times}700mm$. In addition to the laboratory model tests, numerical simulations were performed using a finite difference code to predict the behavior of geocell reinforced ballast. The results from numerical simulations were compared with the experimental data. The numerical and experimental results manifested the importance that the geocell reinforcement has a significant effect on the ballast behaviour. The results depicted that the stiffness of underlying soft clay subgrade has a significant influence on the behavior of the geocell-aggregate composite material in redistributing the loading system.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1384-1394
• /
• 2004

The purposes of this study were to investigate the current performance of 119 rescue uniforms and to improve them in terms of fitness, mobility, functionality, and convenience. This study was conducted a questionnaire survey on rescuers in 22 rescue squads in Seoul through direct. observations and face-to-face interviews to investigate the dissatisfaction of their uniforms. According to the results of this survey, respondents were highly dissatisfied with the fitness of uniforms, design, and functionality. liking into consideration of the problems found through this survey, an experimental uniform was developed as follows. The girth and width of the experimental uniform were designed to be more ample than the current uniforms and the jacket could be worn over pants. And the size and the number of pockets were increased in both the Jacket and trousers. In addition, the hems of the sleeves and trousers as well as the fly front of the jacket were improved. Furthermore, darts were added to the front and back of the knees to improve knee movement. Then an experimental uniform was evaluated through three sequences of wearing tests to compare it with the current uniforms: the evaluation of the appearance, mobility. and performance at field activity. According to these tests, the experimental uniform was found to be more satisfactory than former one.

• 열처리공학회지
• /
• 제20권4호
• /
• pp.175-180
• /
• 2007

The hardness of cold-forged products is in close relationship with its effective strain. This study presented the estimating method of hardness for cold-forged SKH9 products without hardness tests in view of resistance to plastic deformation using finite element code, DEFORM$^{TM}$. The flow stress equation obtained from the compression test was only used as a basic data to estimate the relationship between effective strain and hardness. In addition, this new estimating method was applied to the cold-forged product which was widely used in industrial field to show the feasibility. As a result, the predicted hardness numbers through FE simulation showed good agreement with the measured hardness numbers. It is possible to estimate the hardness not by hardness tests, but by only computer simulations for the deformed products. Also, effective strain values were possibly estimated by measuring hardness numbers, and vice versa.

• 동력기계공학회지
• /
• 제18권5호
• /
• pp.115-121
• /
• 2014

Alloy 617 is the one of the leading candidate materials for intermediate heat exchangers(IHX) of a very high temperature reactor(VHTR) system. Some of the components are joined by many welding techniques and therefore the welded joints are inevitable in the construction of systems. In the present paper, the low cycle fatigue(LCF) behaviors of Alloy 617 base metal(BM) and the gas tungsten arc welded (GTAWed) weld joints(WJ) are investigated experimentally under strain controlled LCF tests. Fully axial total-strain controlled tests have been conducted at room temperature with total strain ranges of 0.6, 0.9, 1.2 and 1.5%. The weld joints have shown a lower fatigue lives compared with base metals at all the testing conditions. The weld joints have shown a higher cyclic stress response behavior than base metal. Both BM and WJ exhibited cyclic strain hardening behavior, depending on the total strain range. In addition, the strain-life parameters for BM and WJ were determined, based on Coffin-Manson equations.