• Journal of Pharmaceutical Investigation
• /
• v.3 no.3
• /
• pp.5-15
• /
• 1973

The stabilizing effect of promazine hydrochloride injectin was tested by irradiation of sun lamp(5,000 Lux) on their acid solution sealed in ampules under various stabilizers. The result of experimentation on the color change, the remaining proportion and the half life of promazine hydrochloride solution is as follows. 1. Instability of promazine hydrochloride solution is mainly caused by the sunlight and oxygen. 2. The pH range of promazine hydrochloride injection is recommended to $pH\;4.4{\sim}5.2$ 3. The decomposition of promazine hydrochloride by the sunlight is composed of pseudo zero order reaction when It maintains colorless solution. 4. The half life of 0.5% promazine hydrochloride injection was 30 hrs. under sun lamp irradiation, but it was delayed to 84 hrs. by the simple stabilizer and to 175 hrs. by compound stabilizer. 5. The stabilizing effect of promazine .hydrochloride injection adding sod. metabisulfite$(Na_2S_2O_5)$ was most excellent in various simple stabilizers and adding $Na_2S_2O_5$ to nicotinic acid, $Na_2S_2O_5$ to nicotinamide were more excellent than other compound stabilizers.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.229-234
• /
• 2016

Aiming to prepare high performance magnetorheological fluid, firstly, oleic acid and sodium dodecyl benzene sulfonate are chosen as surfactants. And then, the mechanical stirring process including stirring time, stirring temperature and stirring speed are optimized by measuring sedimentation ratio and zero-field viscosity. Finally, the properties of prepared magnetorheological fluid are elaborated. The results indicate that the compounding of oleic acid and sodium dodecyl benzene sulfonate can improve the properties of magnetorheological fluid distinctively, and the optimistic compounding content is 4g:4g or 5g:5g. The surfactants adding orders and the second stirring time have little effect on the properties of magnetorheological fluid, while obviously of the first stirring time, temperature and speed. Moreover, the sedimentation ratio of prepared magnetorheological fluid is less than 5.2% in two weeks, the zero-field viscosity is smaller than $0.6Pa{\cdot}s$ at $20^{\circ}C$, and the maximum yield stress is higher than 50 kPa.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.114-122
• /
• 2004

This paper presents a novel single-stage active-clamp type high frequency resonant inverter. The proposed topology is integrated full-bridge boost rectifier as power factor corrector and active-clamp type high frequency resonant inverter into a single-stage. The input stage of the full-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. By adding additional active-clamp circuit to conventional class-E high frequency resonant inverter, main switch of inverter part operates not only at Zero-Voltage-Switching mode but also reduces the switching voltage stress of main switch. Simulation results have demonstrated the feasibility of the proposed high frequency resonant inverter. Characteristics values based on characteristics estimation through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in the fields of induction heating applications, fluorescent lamp and DC-DC converter etc.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.4
• /
• pp.348-355
• /
• 2022

A bipolar DC distribution system suffers from an imbalance in voltages when asymmetric loads are connected at the outputs. Dedicated voltage balancers are required to address the imbalance in bipolar voltage levels. However, additional components eventually increase the cost and decrease the efficiency and power density of the system. Therefore, to deal with the imbalance in output voltages without adding any extra components, this study presents a coupled inductor-based voltage balancing technique with a dual-output CLL resonant converter. The proposed coupled inductor does not require extra magnetic components to balance the output voltages because it is the result of resonant inductors of the CLL tank circuit. It can also avoid complex control schemes applied to voltage balancing. Moreover, with the proposed coupled inductor, the CLL converter acquires good features including zero voltage and zero current switching. Detailed analysis of the proposed coupled inductor is presented with different load conditions. A 3.6-kW hardware prototype was built and tested to validate the performance of the proposed coupled inductor-based voltage balancing technique.

• Earthquakes and Structures
• /
• v.22 no.2
• /
• pp.109-120
• /
• 2022

Older or damaged structures can require significant retrofit to ensure they perform well in subsequent earthquakes. Supplemental damping devices are used to achieve this goal, but increase base shear forces, foundation demand, and cost. Displacement reduction without increasing base shear is possible using novel semi-active and recently-created passive devices, which offer energy dissipation in selected quadrants of the force-displacement response. Combining these devices with large, strictly passive energy dissipation devices can offer greater, yet customized response reductions. Supplemental damping to reduce response without increasing base shear enables a net-zero base shear approach. This study evaluates this concept using two incremental dynamic analyses (IDAs) to show displacement reductions up to 40% without increasing base shear, more than would be achieved for either device alone, significantly reducing the risk of response exceeding the unaltered structural case. IDA results lead to direct calculation of reductions in risk and annualized economic cost for adding these devices using this net-zero concept, thus quantifying the trade-off. The overall device assessment and risk analysis method presented provides a generalizable proof-of-concept approach, and provides a framework for assessing the impact and economic cost-benefit of using modern supplemental energy dissipation devices.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.642-650
• /
• 2005

This research investigates the effects of adding oxidants such as $Fe^0$, $Fe^{2+}$, and ${S_2O_8}^{2-}$ in the sonolysis of 1,4-D. Results indicate that the degradation could be divided into two steps (initiation and acceleration) kinetically. The initial portion agreed with zero-order expression, while the second portion could be fitted with pseudo first-order expression. In the presence of ${HCO_3}^-$, as a radical scavenger, the degradations of 1,4-D and TOC were suppressed, indicating that OH radical is an important factor in the sonolysis. The overall degradation efficiency of 79.0% in the sonolysis was achieved within 200 minutes. While $Fe^0$, $Fe^{2+}$, and ${S_2O_8}^{2-}$ were individually combined with sonication, the degradation efficiency of 1,4-D increased 18.6%, 19.1%, and 16.5% after 200 min, respectively. The addition of oxidants not only changed the kinetic model from zero to pseudo first order at initiation step, but also increased the rate constants in the acceleration step. The addition of oxidants in the sonolysis of 1,4-D also improved the mineralization of 1,4-D, however, the effect of adding oxidants on the rate increase was similar regardless of the oxidants.

• Journal of the Korean Ceramic Society
• /
• v.40 no.4
• /
• pp.350-353
• /
• 2003

Millimeter-wave dielectric ceramics have been used like applications for ultrahigh speed wireless LAN because it reduces the resources of electromagnetic wave, and Intelligent Transport System (ITS) because of straight propagation wave. For millimeterwave, the dielectric ceramics with high quality factor (Q$.$f), low dielectric constant($\varepsilon$), and nearly zero temperature coefficient of resonant frequency ($\tau$) are needed. No microwave dielectric ceramics with these three properties exist except Ba(Mg$\_$1/3/Ta/sub1/3/)O$_3$ (BMT), which has a little high s: In this paper, alumina (Al$_2$O$_3$) and fosterite (Mg$_2$SiO$_4$), candidates for millimeter-wave applications, were studied with an objective to get high q$.$f and nearly zero $\tau$$\_$f/ For alumina ceramics, q$.$f more than 680,000 GHz was obtained but it was difficult to obtain nearly zero Qf. On the other hand, for forsterite ceramics, q$.$f was achieved from 10,000 GHz of commercial for sterite to 240,000 GHz of highly purified MgO and SiO$_2$ raw materials, and $\tau$$\_$f/ was reduced a few by adding TiO$_2$ with high positive $\tau$$\_$f/.

• Journal of Elementary Mathematics Education in Korea
• /
• v.22 no.2
• /
• pp.183-198
• /
• 2018

In this paper, I theoretically considered joining and separating activities and revisited the textbooks from 7 countries and Korean mathematics textbooks from 5th revised curriculum to 2015 revised curriculum to find implication for the treatment of 0 in the joining and separating activities. The 'joining' has definition and properties similar to addition, but the 'separating'is difficult to define and is not considered to have properties similar to subtraction. In the sense of computation, joining and separating can be seen as' part-part-to-whole' situations, but are just part of the addition and subtraction situations. The analysis of textbooks from 7 counties showed that Singapore and Malaysia textbooks already studied zero and then included it in joining and separating activities, but other countries did not include it as joining and separating activities. The textbooks of South Korea have consistently suggested not to include zero, but teacher's guide has shown that there is a little consistency in the treatment of zero. As a conclusion, I suggested that it was necessary to propose a proper context of the situation in order to introduce joining and separating without including 0 in terms of student level and to propose that a more consistent presentation of zero handling in the teaching in the teacher's guide.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1193-1195
• /
• 2002

This paper presents Active-clamp Class-E high frequency resonant inverter with single-stage. The proposed circuit is integrated Active-c class-E circuit to boost converter with the funct power factor correction. Boost converter is opera positive and negative half cycle respectively at frequency(60Hz), operating in Discontinuous Con Mode(DCM) of boost converter performs high p factor. By adding active-clamp circuit in Cl inverter, main switch of inverter part is operat only ZVS(Zero Voltage Switch), but also reduce switching voltage stress of main switch. Simulation result using Psim4.1 show that the p prove the validity of theoretical analysis. This proposed inverter will be able to be pract used as a power supply in various fields are ind heating applications, DC-DC converter etc.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.138-145
• /
• 2015

In this paper, a novel static overmodulation scheme (OVM) for space-vector PWM (SVPWM) is proposed. The proposed static OVM scheme uses the concept of adding offset voltages in linear region as well as overmodulation region to fully utilize DC-link voltage. By employing zero sequence voltage injection, the proposed scheme reduces procedures for achieving SVPWM such as complicated gating time calculation. In addition, this paper proposes a stepwise discontinuous angle movement in high modulation region in order to reduce Total Harmonic Distortion (THD). The validity of the proposed scheme is verified through theoretical analysis and experimental results.