• The Korean Journal of Food And Nutrition
• /
• v.30 no.4
• /
• pp.653-664
• /
• 2017

This study added stevia leaf powder at ratios of 0.5, 1.0, 1.5, and 2.0 percent to Omija-pyun (Schisandra chinensis Jelly) as a natural low-calorie sweetener instead of sugar which is added to Omija-pyun in considerable amounts to evaluate quality characteristics and antioxidant activities compared to the control group with the addition of sugar. Moisture content of Omija-pyun expanded by increasing the measurement of stevia leaf powder (p<0.001), pH (p<0.01) and sugar content (p<0.001) decreased. L-values and b-values revealed a tendency to increase by adding more stevia leaf powder, but a-value revealed a tendency to decrease (p<0.001). Hardness (p<0.001) and chewiness (p<0.05) decreased by adding more stevia leaf powder. Based on the consumer preference evaluation, Omija-pyun with the addition of 0.5 percent stevia leaf powder was the most preferable in terms of color and flavor (p<0.001). The control group and Omija-pyun with the addition of 0.5 percent stevia leaf powder was the most preferable in terms of taste and texture (p<0.001). There were significant differences in the organoleptic properties except hardness between the samples by quantitative descriptive analysis. The control group revealed the highest preference in terms of redness and transparency, and redness and transparency tended to decrease by adding more stevia leaf powder (p<0.001). Organoleptic properties on bitterness and sourness were enhanced by adding more stevia leaf powder in the principal component analysis (PCA). Regarding antioxidant properties, total phenol compounds and flavonoid contents of Omija-pyun increased by adding more stevia leaf powder, and DPPH radical scavenging capacity also increased (p<0.001). Based on results, it is preferable to serve Omija-pyun with the addition of 1.0 percent stevia leaf powder instead of sugar within the context of quality and antioxidant activity.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.40-43
• /
• 2000

The electrons and holes trapped in the tunneling oxide and interface-states generated in the Si/SiO$_2$ interface during program/erase (P/E) operations are known to cause reliability problems which can deteriorate the cell performance and cause the V$_{th}$ window close. This deterioration is caused by the accumulation of electrons and holes trapped in the oxide near the drain and source side after each P/E cycle. we propose three new erase schemes to improve the cell's endurance characteristics: (1)adding a Reverse soft program cycle after the source erase operation, (2)adding a detrapping cycle after the source erase operation, (3)adding a convergence cycle after the source erase operation. (3) is the most effective performance among the three erase schemes have been implemented and shown to significantly reduce the V$_{th}$ window close problem. And we are able to design the reliable periperal circuit of flash memory by using the (3).(3).

• Journal of environmental and Sanitary engineering
• /
• v.15 no.1
• /
• pp.54-61
• /
• 2000

We studied the adsorption characteristics on the treatment process of heavy metal wastewater by using cuttle fish bones powder. When adding the 0.25% cuttle fish born powder in the heavy metal solution, $Fe^{3+}$ and $Pb^{2+}$ were high removed than other heavy metals as above 95%. In the solution which was adjusted to pH 5, 7 and 9, there was not observed the difference thing on the heavy metal removal rate. At test using plating wastewater treatment, adding 1%, 1.5% and 2% of the cuttle fish born powder, the heavy metal removal rate were as follows; Zn 12.5 - 37.5%, Mn 18.0 - 62.2%, Cd 36.8 -93.0%, Cu 51.4 - 97.4%, Cr 70.8 - 99.1%, Fe 87.2 - 99.3% and Pb 92.8 - 99.9%. When adding the 0.15% cuttle fish born powder and mixing for 20 minutes, the solution was happened the adsorption equability. Applied this results to the Freundlich＇s iso-thermal equation, we found the cuttle fish born＇s probability as a good adsorbent.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.81-86
• /
• 2001

The functions of food packaging are not only prevention from physical damage and loss during carrying and transportation, but also extension of shelf-life by adding antimicrobial substrate in packaging materials. Consumption of active packaging is gradually increasing. With different dosage of potassium sorbate(P.S.), the food preservative agent, antimicrobial papers were made by internal and external application of starch. The antimicrobial action of the paper was analyzed by the halo test and the shake flask method. The mechanical properties and strength were also measured. Antimicrobial papers adding P.S. showed higher values in tensile index than adding starch. The antimicrobial paper using starch showed similar microbe decreasing rate as that using P.S. Though microbe decreasing rate was 21.9%, it showed possibility to make antimicrobial paper using food preservative.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.604-607
• /
• 2004

Concrete structures in the marine environment often deteriorate in the early stage of their service life because of contact with various aggressive conditions. In recent years, the study on the concrete in the marine environment are carried out to increase their service life. In this experimental study, the concrete specimens were prepared with various adding contents of inorganic antifouling agent$(0\~3.0wt\%)$ composed to some fluosilicate solution. For evaluatin of the physical and chemical properties of concretes containing inorganic antifouling agent, various tests such as setting time, slump loss, compressive strength, water absorption rate, freezing and thawing resistance and SEM micrographs of concrete, were conducted. As the results, physical and chemical properties of concretes were improved with an adding of inorganic antifouling agent. From the results of various tests, the optimal adding contents of antifouling agent was $1.0wt\%$.

• Journal of Environmental Science International
• /
• v.13 no.3
• /
• pp.279-288
• /
• 2004

This study aimed at improving the $TiO_2$ photocatalytic degradation of HA. A set of tests was first conducted in the dark to study the adsorption of HA at different coexisting material concentration. Adsorption rate increased with adding cation ion but decreased with adding bicarbonate ion. The photodegradation of HA in the presence of UV irradiation was investigated as a function of different experimental condition: initial concentration of HA, $TiO_2$ weight, pH, air flow rate and coexisting material. It was increased either at low pH or by adding cation ion. The increase of cation strength in aqueous solution could provide a favorable condition for adsorption of HA on the $TiO_2$ surface and therefore enhance the photodegradation rate. It was found that bicarbonate ions slowed down the degradation rate by scavening the hydroxyl radicals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.167-172
• /
• 2007

In the case of gear oil which is used under severe running condition in automotive, the various additives is used fur increasing the ability of enduring against seizure. In this paper, the wear and friction characteristics observed using the Falex friction and wear test machine in adding the $MoS_2$ to auto gear oil. As the result of experimentation, the friction and wear characteristics is the most excellent in adding concentration range of the $MoS_2\;2.5{\sim}5wt.%$.

• Tribology and Lubricants
• /
• v.11 no.1
• /
• pp.50-57
• /
• 1995

When engine oil is used under severe running condition, the Lubricational characteristics is very important. I have studied the Lubricational characteristics with Compound Additives of engine oil for the Falex wear test machine. Adding detergent (Ca-phenate) to engine oil, the seizure is more improved than in case of non-adding, and adding Zn-DTP (Zinc dialkyl dithio phosphate), the extreme pressure property is excellent at the high load. But when the PTFE (Polytetra Fluoro Ethylene) and MoS$_{2}$ (Molybdenum disulfide) are added, the temperature characteristics and the anti-wear property become excellent because the stability can be maintained in a high temperature. The result are as follows, it can be improved that when the compound of the Ca-phenate and Zn-DTP, MoS$_{2}$, PTFE, etc. was added to engine oil, the lubrication characteristics become better. It is argued that it is improved because of excellence of the anti-wear, the extreame pressure properties and the heat stability.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.265-268
• /
• 2003

This study discusses the fundamental properties of high performance concrete and autogenous drying shrinkage with the kinds and the adding amount of superplasticizer. According to results, drying shrinkage hardly shows differences by the kinds of superplasticizer, and is reduced with an increase of the adding ratio. Autogenous shrinkage is reduced in order of HP>HN>HM, but does not make a big difference. As the adding amount of superplasticizer increases, autogenous shrinkage is reduced due to a decrease of cement content which influences on autogenous shrinkage seriously.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.473-476
• /
• 2003

This study discusses the use of anti-shrinkage agent as the method to reduce autogenous and drying shrinkage. According to results, as for the fundamental properties of high performance concrete, fluidity and strength decrease with an increase of the adding ratio of anti-shrinkage agent, but air content increases. Compared with plain concrete, autogenous and drying shrinkage are reduced by 12~52% and 4~22% respectively upto the adding rario of anti-shrinkage agent of 2.0%. When expansive additive is added by 5.0%, they are also reduced by 38~95% and 15~50% respectively. Therefore, as expansive additive of 5.0% and anti-shrinkage agent of 1.0% are added to high performance concrete of around W/B 30%, it is considered that fluidity and strength are hardly influenced, and in addition, crack by shrinkage can be prevented effectively.