• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.256-257
• /
• 2023

This paper aims to propose optimal method to assess and cumulate the daily profit for liner shipping to support the shipping lines in making optimal decision with the highest average daily profit. This paper not only explains the actual calculated results align with decision-makers' behavior from concepts indicated in cumulative prospect theory but also contributes to an easy-to-apply method for liner shipping network predictability in and provides optimal decision-making is helpful for shipping managers for the best effective selection of the most appropriate alternative under uncertainties.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.948-955
• /
• 2019

As interests in 360-degree VR (Virtual Reality) video services enormously grow, compression and streaming technologies for VR video data have been rapidly developed. Quality Emphasized Region (QER) based streaming scheme has been developed as a kind of viewport-adaptive 360-degree video streaming technology for maintaining immersive experience and reducing bandwidth waste. For selecting a QER corresponding to the user's gaze coordinate, QER-based streaming scheme requires the calculation of Quality Emphasis Center (QEC) distance and signaling message delivery for requesting QER switching. QEC distance calculations require high computational complexity because of repeated calculations as many times as the number of QERs. Furthermore, the signaling message interval results in a trade-off relationship between efficient bandwidth usage and flexible QER switching. In this paper, we propose an improved QER selection algorithm based on MMT protocol to solve this problem. The proposed algorithm could achieve computational complexity reduction by using preprocessed QER_ID_MAP. Also, flexible QER switching could be achieved, as well as efficient bandwidth utilization by an adaptive adjustment of the signaling interval.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.43-54
• /
• 2003

As the demand for ubiquitous mobile wireless Internet grows, vehicles are receiving a lot of attention as new networking platforms. The demand for 4G all-IP networks encourages vehicle networks to be connected using IPv6. By means of network mobility (NEMO) support, we can connect sensors, controllers, local ,servers as well as passengers' devices of a vehicle to the Internet through a mobile router. The mobile router provides the connectivity to the Internet and mobility transparency for the rest of the mobile nodes of an in-vehicle nv6 network. So, it is .important for the mobile router to assure reliable connection and a sufficient data rate for the group of nodes behind it. To provide reliability, this paper proposes an adaptive multihoming architecture of multiple mobile routers. Proposed architecture makes use of different mobility characteristics of different vehicles. Simulation results with different configurations show that the proposed architecture increases session preservation thus increases reliability and reduces packet loss. We also show that the proposed architecture is adaptive to heterogeneous access environment which provide different access coverage areas and data rates. The result shows that our architecture achieves sufficient data rates as well as session preservation.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.520-529
• /
• 2011

In this paper, we propose the extension of the MPEG-2 Transport Stream (TS) header for efficient adaptation of multi-layer coded video such as scalable video coding (SVC) and multiview video coding (MVC) in the HTTP streaming. First of all, the limit of the existing TS in terms of flexible adaptation of multi-layer video is investigated, and the signaling by extending TS header is proposed to provide efficient adaptation in a TS level. The proposed extension utilizes the private data field in the adaptation field of TS header to signal scalability and/or view information, which enable us to support diverse adaptation that suits underlying constraints of client capabilities, network conditions and user preferences. In short, the extension enables adaptation of scalable video with full scalability as well as view selection of multiview video in a TS level while keeping backward compatibility with the existing TS syntax/semantics. The performance of the proposed extension is compared with the existing adaptation using PID (packet ID) in terms of efficiency and complexity of adaptation. Furthermore, the increase of TS overhead caused by proposed extension is analyzed and an extension scheme to minimized the overhead is proposed.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.849-858
• /
• 2019

Recent developments in computer graphics technology and image processing technology have increased interest in point cloud technology for inputting real space and object information as three-dimensional data. In particular, point cloud technology can accurately provide spatial information, and has attracted a great deal of interest in the field of autonomous vehicles and AR (Augmented Reality)/VR (Virtual Reality). However, in order to provide users with 3D point cloud contents that require more data than conventional 2D images, various technology developments are required. In order to solve these problems, an international standardization organization, MPEG(Moving Picture Experts Group), is in the process of discussing efficient compression and transmission schemes. In this paper, we provide a region division transfer method of 3D point cloud content through extension of existing MPEG-DASH (Dynamic Adaptive Streaming over HTTP)-SRD (Spatial Relationship Description) technology, quality parameters are further defined in the signaling message so that the quality parameters can be selectively determined according to the user's request. We also design a verification platform for ROUTE (Real Time Object Delivery Over Unidirectional Transport)/DASH based heterogeneous network environment and use the results to validate the proposed technology.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.784-795
• /
• 2016

In this paper, we investigate the resource allocation problem in time-varying heterogeneous wireless networks (HetNet) with multi-homing user equipments (UE). The stochastic optimization model is employed to maximize the network utility, which is defined as the difference between the HetNet's throughput and the total energy consumption cost. In harmony with the hierarchical architecture of HetNet, the problem of stochastic optimization of resource allocation is decomposed into two subproblems by the Lyapunov optimization theory, associated with the flow control in transport layer and the power allocation in physical (PHY) layer, respectively. For avoiding the signaling overhead, outdated dynamic information, and scalability issues, the distributed resource allocation method is developed for solving the two subproblems based on the primal-dual decomposition theory. After that, the adaptive resource allocation algorithm is developed to accommodate the timevarying wireless network only according to the current network state information, i.e. the queue state information (QSI) at radio access networks (RAN) and the channel state information (CSI) of RANs-UE links. The tradeoff between network utility and delay is derived, where the increase of delay is approximately linear in V and the increase of network utility is at the speed of 1/V with a control parameter V. Extensive simulations are presented to show the effectiveness of our proposed scheme.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.131-140
• /
• 2017

Multipath TCP (MPTCP) is a transport layer protocol that simultaneously transmits data using multiple interfaces. MPTCP is superior to existing TCP in network environment with homogeneous subflows, but it shows worse performance compared to existing TCP in network environment with bufferbloat. If a bufferbloat occurs in one of the MPTCP multipaths, the packet will not arrive at the MPTCP receive buffer due to a sudden increase in delay time, resulting in a HoL blocking phenomenon. It makes the receive window of the other path to be zero. In this paper, we apply Adaptive Random Early Detection (ARED), Controlled Delay (CoDel) and Proportional Integral Controller Enhanced (PIE) among the proposed Active Queue Management (AQM) to limit the delay of bufferbloat path. Experiments were conducted to improve the performance of MPTCP in heterogeneous networks. In order to carry out the experiment, we constructed a Linux-based testbed and compared the MPTCP performance with that of the existing droptail.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.722-737
• /
• 2011

In this paper, we propose an estimation of network jitter that occurs when transmitting TCP packets containing MPEG-2 TS in progressive streaming service over wired or wireless Internet networks. Based on the estimated network jitter size, we can calculate required de-jitter buffering time to absorb the network jitter at the receiver side. For this purpose, by exploiting the PCR timestamp existing in the TS packet header, we create a new timestamp information that is marked in the optional field of TCP packet header to estimate the network jitter. By using the proposed de-jitter buffering scheme, it is possible to employ the conventional T-STD buffer model without any modification in the progressive streaming service over IP networks. The proposed method can be applicable to the recently developed international standard, MPEG DASH (dynamic adaptive streaming over HTTP) technology.

• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.8-19
• /
• 2020

We see an energy fucused smart city evolution of the UK along with the project of "Smart London Plan (SLP)." A theoretical logic of business model innovation has been discussed and a research framework of evolving energy focused smart city is formulated. The starting point is the silo system. In the second stage, the private investment in smart meters establishes a basement for next stages. As results, the UK's smart energy sector has evolved from smart meter installation through smart grid to new business models such as water-energy nexus and microgrid. Before smart meter installation of the government, the electricity system was centralized. However, after consumer engagement plan has been set to make them understand benefits that they can secure through smart meters, the customer behavior has been changed. The data analytics firm enables greater understanding of consumer behavior and it helps energy industry to be smart via controlling, securing and using that data to improve the energy system. In the third stage, distribution network operators (DNOs)' access to smart meter data has been allowed and the segmentation starts. In the fourth stage, with collaboration of Ofwat and Ofgem, it is possible to eliminate unnecessary duplication of works and reduce interest conflict between water and electricity. In the fifth stage, smart meter and grid has been integrated as an "adaptive" system and a transition from DNO to DSO is accomplished for the integrated operation. Microgrid is a prototype for an "adaptive" smart grid. Previous steps enable London to accomplish a platform leadership to support the increasing electrification of the heating and transport sector and smart home.

• Wind and Structures
• /
• v.28 no.1
• /
• pp.31-47
• /
• 2019

The accurate prediction of snow distributions under the wind action on roofs plays an important role in designing structures in civil engineering in regions with heavy snowfall. Affected by some factors such as building shapes, sizes and layouts, the snow drifting on roofs shows more three-dimensional characteristics. Thus, the research on three-dimensional snow distribution is needed. Firstly, four groups of stepped flat roofs are designed, of which the width-height ratio is 3, 4, 5 and 6. Silica sand with average radius of 0.1 mm is used to model the snow particles and then the wind tunnel test of snow drifting on stepped flat roofs is carried out. 3D scanning is used to obtain the snow distribution after the test is finished and the mean mass transport rate is calculated. Next, the wind velocity and duration is determined for numerical simulations based on similarity criteria. The adaptive-mesh method based on radial basis function (RBF) interpolation is used to simulate the dynamic change of snow phase boundary on lower roofs and then a time-marching analysis of steady snow drifting is conducted. The overall trend of numerical results are generally consistent with the wind tunnel tests and field measurements, which validate the accuracy of the numerical simulation. The combination between the wind tunnel test and CFD simulation for three-dimensional typical roofs can provide certain reference to the prediction of the distribution of snow loads on typical roofs.