• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.399-403
• /
• 2009

In IEEE 802.15.1 (Bluetooth) Ad-hoc networks, the frequency is resolved by the specific part of the digits of the Device clock and the Bluetooth address of the Master device in a given piconet. The piconet performs a fast frequency hopping scheme over 79 carriers of 1-MHz bandwidth. Since there is no coordination between different piconets, packet collisions may occur if two piconets are located near one another. In this paper, we proposed a software/hardware co-design of an adaptive frequency decision mechanism so that more than two different kinds of wireless devices can stay connected without frequency collision. Suggested method was implemented with C program and HDL (Hardware Description Language) and automatically synthesized and laid out. The adaptive frequency hopping circuit was implemented in a prototype and showed its operation at 24MHz correctly.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.10a
• /
• pp.119-122
• /
• 1991

In this paper, a new adaptive IIR notch filter employing all pass filter is proposed. Proposed all pass filter is composed of all pole and all zero sections, each of which utilizes modulation lattice filter [11]. And, adaption algorithm for proposed notch filter is also derived. In addition, the error surface for proposed IIR adaptive notch filter is analyzed. Computer simulation results reveal that the proposed adaptation algorithm works well for low SNR(signal to noise ratio) single and multiple sinusoids. And it is shown that for estimation time varying frequency, the parameter which is related to notch bandwidth is important than any other parameters.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2S
• /
• pp.656-665
• /
• 2000

A critical issue in the performance of a video-on-demand system is the I/O bandwidth required in order to satisfy client requests. Several approaches: batching, bridging, piggybacking are used ot reduce the I/O demand on the video server through sharing. Piggybacking is the policy for altering display rates of requests in progress fro the same object, for the purpose of merging their corresponding I/O streams into a single stream, which can serve the entire group of merged requests. In this paper, we propose a new policy called an adaptive reservation-based piggybacking that dynamically reserves the I/O stream capacity of video server for popular videos according to video server loads to immediately schedule the requests for popular videos. The performance of the proposed policy is evaluated through simulations, and is compared with that of simple piggybacking. As the result, we know that the adaptive reservation-based piggybacking provides better service probability, average waiting time and percentages saving in frames than simple piggybacking.

• Journal of KSNVE
• /
• v.2 no.2
• /
• pp.107-116
• /
• 1992

An adaptive signal processing technique is implemented for the active noise cancellation of the plane acoustic wave propagating in a duct. To avoid the instability caused by the acoustic feedback from the control speaker to the detect microphone, an off-line modeling of the acoustic feedback plant is done using the FIR filter. Auxiliary path required for the filtered-x LMS algorithm is modeled as well. Before going into the experiments, a simulation is carried out under the same conditions with experiments. The simulation shows that the longer the length of the adaptive filter is, the better the results are achieved. Experiments have been carried out at lower audio frequency range (50 - 400Hz), and the results are in good agreements with those of simulation study. As a results of this adaptive noise control, around 50dB is reduced for a pure tone noise, and for a bandlimited noise with the bandwidth of 316Hz, a maximum of 30dB noise reduction is attained.

• Journal of electromagnetic engineering and science
• /
• v.11 no.1
• /
• pp.5-10
• /
• 2011

We propose an adaptive cooperative scheme with a multi-relay node that achieves high bandwidth efficiency and achieves better SEP performance. In the proposed protocol, if the quality of the direct channel is better than that of the all channels from relays to destination, the source will transmit directly to the destination. Otherwise, the source broadcasts the signal and then a potential relay will be chosen to help the source. A re-transmission will also occur if the potential relay cannot be detected. The spectral efficiency is first derived by calculating the probability of each mode, i.e., direct and cooperation transmission. Subsequently, the SEP performance of M-PSK modulation for the scheme is analyzed by considering each event where the source transmits data to the destination. Finally, the obtained analytical results are verified through computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8B
• /
• pp.1159-1169
• /
• 2010

This paper introduces the mobility-adaptive QoE provisioning solution. The key is placed on the intelligent selection of access network depending on the QoE criteria classified by the user mobility and the bandwidth demand for service. We further focus on the network-based smart handover scheme using the mobility-adaptive handover decision and the enhanced MIH-FMIP framework. The concept is the network-based calm service and the balance in order to facilitate vertical and seamless handover. In result, it is figured out that our solution improves QoE performance by selecting appropriate access network, repressing handover occurrence, and reducing handover delay as well.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.10
• /
• pp.2790-2796
• /
• 1999

In video-on-demand systems, the I.O bandwidth of video servers is the critical resource which contributes to increase in latency. Several approaches: bridging, piggybacking are used to reduce the I/O demand on the video server through sharing. Batching delays the requests for the different videos for a batching window so that more requests for the same video arriving during the current batching window may be served using the same stream. In this paper, we propose an adaptive reservation-based batching policy which dynamically reserves video server capacity for popoular videos according to video server loads. The performance of the proposed policy is evaluated through a simulation, and is compared with simple batching and static reservation-based batching policies. As the result, we know that the adaptive reservation-based batching policy more improves service ratio and average waiting time than simple batching and simple reservation-based batching policy more improves service ratio and average waiting time than simple batching and simple reservation-based batching polices.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.207-222
• /
• 2012

Recently, many consumer electronics manufacturers have produced 3D devices such as 3DTVs and 3D monitors as interests in a stereoscopic video service are getting increased. However, most of 3D services are focused on local storage or bandwidth guaranteed service since 3D stereoscopic video service require bandwidth more stable and larger. This property causes difficulties in seamless stereoscopic video streaming services under IP based open network environment that cannot guarantee quality of services. In order to achieve a seamless video streaming service the international standard organization MPEG (Moving Pictures Experts Group) has developed the adaptive HTTP streaming technology called as DASH (Dynamic Adaptive Streaming over HTTP). However, the DASH doesn't have obvious scheme which can express the two elementary video streams based service-compatible stereoscopic contents in one segment. Therefore, this paper proposes a scheme of efficient 3D adaptive streaming service based on the DASH, which covers not only frame-packing stereoscopic contents but also service-compatible ones. The 3D adaptive HTTP streaming scheme introduced in this paper is able to provide 3D contents with various qualities to user and also has benefit that single 3D content can be applied to a variety of devices.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.948-955
• /
• 2019

As interests in 360-degree VR (Virtual Reality) video services enormously grow, compression and streaming technologies for VR video data have been rapidly developed. Quality Emphasized Region (QER) based streaming scheme has been developed as a kind of viewport-adaptive 360-degree video streaming technology for maintaining immersive experience and reducing bandwidth waste. For selecting a QER corresponding to the user's gaze coordinate, QER-based streaming scheme requires the calculation of Quality Emphasis Center (QEC) distance and signaling message delivery for requesting QER switching. QEC distance calculations require high computational complexity because of repeated calculations as many times as the number of QERs. Furthermore, the signaling message interval results in a trade-off relationship between efficient bandwidth usage and flexible QER switching. In this paper, we propose an improved QER selection algorithm based on MMT protocol to solve this problem. The proposed algorithm could achieve computational complexity reduction by using preprocessed QER_ID_MAP. Also, flexible QER switching could be achieved, as well as efficient bandwidth utilization by an adaptive adjustment of the signaling interval.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7C
• /
• pp.654-662
• /
• 2009

Video streams for mobile video streaming can be encoded to fit the available network bandwidth by controlling three factors: temporal resolution, spatial resolution, and picture quality. The controlling of picture quality by modifying the quantization parameter (QP) is most widely used. In this paper, we demonstrate that reducing the spatial resolution adaptively can be more efficient in terms of picture quality and energy consumption in low bit-rate environment, and present a model to find the optimal spatial resolution for the available bandwidth. Adaptive spatial resolution control scheme is especially effective when the bandwidth between the video server and the mobile device varies considerably with time, and when the mobile device is sensitive to energy consumption. Our scheme can improve the picture quality by approximately O.5dB and reduce energy consumption by more than 50% compared to the conventional video coding in low bit-rate environment.