• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.767-772
• /
• 2014

As temporary network, ad-hoc network has been effected by structures and implemented environments of networks. In this paper, transmission performance of lattice structure ad-hoc network, which is expected to use in sensor network and IoT(Internet of Things), is analyzed in point of intrusions and countermeasure for intrusion is suggested. In this paper, computer simulation based on NS-2 is used for performance analysis, VoIP(Voice over Internet Protocol) as a widely used service is chosen for performance measure. MOS(Mean Opinion Score) and call connection rate is used as performance parameter. As results of performance analysis, it is shown that for MOS, random network is better then lattice network at intrusion environments, but for call connection rate, lattice network is better then random network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.65-67
• /
• 2018

We introduce a system that detects smoking in a specific area. The proposed system is implemented on a wireless ad hoc network consisting of Raspberry Pi boards. It is more economical owing to low-cost device than commercial smoking monitoring system and is scalable than the existing system with single Raspberry Pi. In this paper, the probability density function of carbon monoxide concentration during smoking and non-smoking is approximated as Gauusian distribution, respectively, using data measured from sensors for a long time. Based on this, a maximum likelihood detection technique is adopted to estimate the smoking status by observing the concentration of carbon monoxide. We aim at improving the reliability by estimating the smoking status using the collected values from multiple sensors connected to the ad hoc network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.213-216
• /
• 2007

The paper deals with a approach to underwater acoustic based Ad-hoc communication, which allows major design strategies for Media Access Control (MAC) within a group of the autonomous underwater vehicles(AUV). The proposed MAC aims at deploying AUV-centric star topology, which minimizes overhead of sensor nodes and improves energy-efficiency. Furthermore, that is also well under long and unknown propagation delays of the underwater acoustic medium. The implemented MAC protocol makes it easier to achieve frame synchronization than TDMA due to deploying localized schedule time, in addition to saving energy consumption by letting nodes sleep. It is also superior to MACA and MACAW in terms of propagation delay. This scalable centralized protocol has the potential to serve as a primer for development of MAC protocol for future underwater acoustic based ad-hoc networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2392-2400
• /
• 2015

Zigbee, which was a representative standard technology for dealing low energy and mesh networks in large deployment area such as smart home, smart building, and massive sensor networks, has been developed and deployed for increasing communication area by using Ad hoc method. It has been originally developed based on IEEE 802.15.4 standard so every node needs 48bit unique address defined by IEEE. However, it is absolutely inefficient to assign an unique address to every communication node where it would be deployed through large-scale network area, e.g., smart lighting and massive sensor networks, because there could be variously multiple companies to deploy network infrastructure and they could have different policy to assign node ID. To prevent the problem, this paper proposes a method of dynamic PANID assignment in overall Personal Coordinators, and also proposes a method for addressing PANID conflict problem which could be derived from dynamic PANID assignment.

• 한국정보컨버전스학회:학술대회논문집
• /
• 2008.06a
• /
• pp.199-204
• /
• 2008

Sensor nodes have various energy and computational constraints because of their inexpensive nature and ad-hoc method of deployment. Considerable research has been focused at overcoming these deficiencies through faster media accessing, more energy efficient routing, localization algorithms and system design. Our research attempts to provide a method of improvement MAC performance in these issues. We show that traditional carrier-sense multiple access(CSMA) protocols like IEEE 802.11 do not handle the first constraint adequately, and do not take advantage of the second property, leading to degraded latency and throughput as the network scales in size, We present more efficient method of a medium access for real-time wireless sensor networks. Proposed MAC protocol is a randomized CSMA protocol, but unlike previous legacy protocols, does not use a time-varying contention window from which a node randomly picks a transmission slot. To reduce the latency for the delivery of event reports, it carefully decides a fixed-size contention window, non-uniform probability distribution of transmitting in each slot within the window. We show that it can offer up to several times latency reduction compared to legacy of IEEE 802.11 as the size of the sensor network scales up to 256 nodes using widely used simulator ns-2. We, finally show that proposed MAC scheme comes close to meeting bounds on the best latency achievable by a decentralized CSMA-based MAC protocol for real-time wireless sensor networks which is sensitive to latency.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.1-10
• /
• 2006

Ubiquitous computing, a new type of network environment has been generating much interest recently and has been actively studied. In ubiquitous computing, the sensor network which consists of low electric power ad-hoc network-based sensors and sensor nodes, is particularly the most important factor The sensor network serves as the mediator between ubiquitous computing and the actual environment. Related studies are focused on network . management through lightweight hardware using RFID. However, to apply these to actual environment, more practical scenarios as well as more secured studies equipped with secures and efficiency features are needed. Therefore, this study aims to build a wireless network based on PTD for multi users, which provides the largest utility in individual networks, and propose an appropriate management method. The proposed method is designed to enhance security and efficiency related to various services required in wireless networks, based on the reliable peripheral devices for users or pm. using pm, which has been applied to electronic commerce transactions in existing papers, this study also proposed an appropriate management method that is suitable for a dynamic environment and setting a temporary group to provide various services.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.40-46
• /
• 2011

Wireless Sensor Networks(WSNs) have shown a lot of good outcomes in providing a various functions depending on industrial expectations by deploying ad-hoc networking with helps of light loaded and battery powered sensor nodes. In particular, it is strongly requested to develop an algorithm of cross-layer control between 2-layer and 3-layer to deriver the sensing data from the end node to the sink node on time. In this paper, based on the above observation we have proposed an IEEE802.15.4 based self priority routing scheme under UC Berkely TinyOS platform. The proposed beacon based priority routing (BPR) algorithm scheme utilizes beacon periods in sending message with embedding the high priority data and thus provides high quality of service(QoS) in the given criteria. The performance measures are the packet Throughput, delivery, latency, total energy consumption. Simulation results under TinyOS Simulator(TOSSIM) have shown the proposed scheme outcome the conventional Ad hoc On-Demand Distance Vector(AODV) Routing.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.243-248
• /
• 2013

With rapid growth and fast diffusion of smartphone technologies, many users are deeply concerned about the smart applications and many mobile applications converged with various related technologies are rapidly disseminated. Especially, the convergence technologies like mobile apps that can establish the wireless ad hoc network between smartphone and other peripherals and exchange data are appear and progressed continuously. In this paper, we design and implement the smart app using bluetooth based wireless ad hoc sensor network that can connect smartphone with sensors and exchange data for various smart applications. The proposed smart application in this paper collects data obtained from more than 2 multi-sensors in real time and fulfills the decision making function by storing data at the database and analysing it. The smart application designed and implemented in this paper is the healthcare application that can analyze and evaluate the patient's health condition with sensing data from multi-sensors in real time through bluetooth module.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06a
• /
• pp.210-211
• /
• 2010

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.3
• /
• pp.75-88
• /
• 2011

Messages need to transmit to the neighbors securely in wireless sensor network, because a sensor node is deployed in hostile area. Thus it is necessary to support secure communication. One of the most important communication part is secure multicast. Especially, group rekeying is a big problem for multicast key management. So, group rekeying must be proceed securely when secrete information is exposed by attacker. Many group rekeying schemes have been studied for ad hoc networks. However, these schemes are Ill1desirable in WSNs. In this paper, we proposed a novel group rekeying scheme in WSNs that it has very powerful security.