• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.605-606
• /
• 2012

In this paper, we consider the problem of scheduling sensor activity to prolong the network lifetime while guaranteeing both discrete target coverage and connectivity among all the active sensors and the sink, called connected target coverage (CTC) problem. We proposed a distributed scheme called Distributed Lifetime-Maximizing Scheme (DLMS) to solve the CTC problem. Our proposed scheme significantly reduces the cost of the construction of the connected cover graphs in comparison with the some conventional schemes. In addition, the energy consumption is more balanced so that the network lifetime will be increased. Our simulation results show that DLMS scheme performs much better than the conventional schemes in terms of the network lifetime.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.559-569
• /
• 2004

It has become more difficult to correspond an cyber attack quickly as a pattern of attack becomes various and complex. And, current security mechanisms just have passive defense functionalities. In this paper, we propose new network security architecture to respond various cyber attacks rapidly and to chase and isolate the attackers through cooperation between security zones. The proposed architecture make possible to deal effectively with cyber attacks such as IP spoofing or DDoS(Distributed Denial of Service) using active packet technology including a mobile sensor on active network. Active Security Management System based on proposed security architecture consists of active security node and active security server in a security zone, and is designed to have more active correspondent than that of existing mechanisms. We implemented these mechanisms in Linux routers and experimented on a testbed to verify realization possibility of Active Security Management System. The experimentation results are analyzed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.60-66
• /
• 2012

This paper aims to constitute a feedback vibration control system using wireless sensor networks and experiment it on a model structure to verify its effectiveness. For the purpose, we set up a feedback vibration control system composed of a wireless input/output(I/O) sensor node based on bluetooth, a home-made shear type MR damper, a shaker which generates a constant size of sine wave, and a simple beam model structure. The vibration control experiment was performed by shaking the 1/4 point of beam with a shaker. At the moment of shaking, we controled the vibration with MR damper which was placed vertically on the center of beam. Simultaneously, by acquiring acceleration response at the 2/4 point of beam, we evaluated the effectiveness of control capability. The control command was set to send a voltage signal to MR damper when the acceleration response, acquired from the wireless I/O sensor node placed at the center of beam, was more than a certain amount. Although the realtime feedback vibration control system constituted in this paper is effective only within a limited command system, it has been proven that the system was able to effectively decrease the vibration of structure by generating a control command aimed for realtime purpose. The system also showed a possibility to be used as a structural response control system adapting a variety of semi-active control algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.890-893
• /
• 2010

In wireless sensor networks, each node generally uses a battery because it is hard to replace or charge. For this reason, study for life time prolongation of each node within the limited energy source has become an important issue. So many ways are suggested to minimize the energy consumption for each node, especially energy efficient MAC protocols have been studied actively. T-MAC of contention based MAC protocol is that added the adaptability on fixed duty cycle of S-MAC. T-MAC allocates the fixed timeout before each node goes to sleep mode from active mode. If no data exchanged in a timeout, each node goes to sleep mode. Because of the timeout is always fixed, the absence of data exchange in a timeout will cause unnecessary energy consumption. In this paper, in order to improve the energy efficiency, we propose a MAC protocol based on adaptive timeout that analyze the probability of the timeout, and provides the modified timeout.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1491-1497
• /
• 2009

Existing methods to measure are based on ToA (Timer of Arrival), RSS (Received Signal Strength), AoA(Angle of Arrival) and other methods. In this paper, we propose a compensation of ToA and RSS methods to measure more precisely the distance of nodes. The comparison experiments with the traditional ToA method show that the average error value of proposed method is reduced 30%. We believe that this proposal can improve location estimation of sensor nodes in wireless sensor networks.

• Journal of KIISE:Information Networking
• /
• v.35 no.1
• /
• pp.34-45
• /
• 2008

In dynamic wireless sensor networks where sources and sinks are moving or are created/died, control overheads for route establishment are increased and thus become one of the major factors for energy consumption. This study introduces prefetching and pruning for Directed Diffusion to remove redundant control messages. Prefetching collects path information for each event with "AnyEvent" in advance and gives quick responses without further flooding of requests. Pruning accumulates history information from previous requests and replies, and then stops forwarding a request towards where the event does not exist. Simulation results with ns show that it is possible to build implicit and soft infrastructures within a Directed Diffusion system through these active collection and passive accumulation and they improve energy consumption more as control overhead goes higher.

• Smart Structures and Systems
• /
• v.6 no.7
• /
• pp.835-849
• /
• 2010

This study investigated propagation characteristics of piezo-activated guided waves in an aluminium rectangular-section tube for the purpose of damage identification. Changes in propagating velocity and amplitude of the first wave packet in acquired signals were observed in the frequency range from 50 to 250 kHz. The difference in guided wave propagation between rectangular- and circular-section tubes was examined using finite element simulation, demonstrating a great challenge in interpretation of guided wave signals in rectangular-section tubes. An active sensor network, consisting of nine PZT elements bonded on different surfaces of the tube, was configured to collect the wave signals scattered from through-thickness holes of different diameters. It was found that guided waves were capable of propagating across the sharp tube curvatures while retaining sensitivity to damage, even that not located on the surfaces where actuators/sensors were attached. Signal correlation between the intact and damaged structures was evaluated with the assistance of a concept of digital damage fingerprints (DDFs). The probability of the presence of damage on the unfolded tube surface was thus obtained, by which means the position of damage was identified with good accuracy.

• Journal of Sensor Science and Technology
• /
• v.26 no.2
• /
• pp.96-100
• /
• 2017

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has been extensively studied as the active material in ammonia gas sensor because of its fast response time, high conductivity and environmental stability. It is well known that a post annealing process for organic devices based on PEDOT:PSS significantly increases the device performance. In this study, we propose the solvent annealing of PEDOT:PSS and investigated its effects. As a results, post solvent annealing on PEDOT:PSS lead to the surface chemical and physical properties change. These changes result in improved conductivity of the PEDOT:PSS. In additional, ammonia sensitivity of solvent annealed PEDOT:PSS become higher than pristine polymer film. The enhancement is mainly caused by the depletion of gas barrier PSS and structural re-forming PEDOT networks. We believe that the post solvent annealing is a promising method to achieve highly sensitivity PEDOT:PSS films for applications in efficient, low-cost and flexible ammonia gas sensor.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.11
• /
• pp.1265-1270
• /
• 2015

For the sensor node or collection node operating with a battery in a wireless sensor network, MAC protocols with improved energy efficiency are important performance factors. In this paper, in order to improve the restrictive capability in accordance with the fixed activity period of the duty cycle technology in the MAC protocol for wireless sensor networks, we propose a periodic adaptive wakeup technique based on receive prediction. The proposed technique is through a performance evaluation using the CC2500 RF transceiver and C8051F330 microcontroller based wireless node, to analyze the minimum active period. As a result, it was confirmed that it is possible to improve energy efficiency by adaptively changing the sleep period in accordance with the change of period.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.1
• /
• pp.64-72
• /
• 2009

Previous research on sensor networks mainly focused on efficient transmission of data from sensors to fixed sink nodes. Recently there has been active research on mobile sink nodes, but the re-search of an environment where both fixed sink nodes and mobile sinks are present at the same time is rather scarce. This paper proposes a technique for context gathering by mobile devices with the sink functionality added through fixed sinks under a previously built, cluster based multi hop sensor network environment. To this end, clustering of mobile devices were done based on the fixed sinks of a previously built sensor network, and by using appropriate fixed sinks, context gathering was made possible. By mathematical comparison with TTDD routing protocol, which was proposed for mobile sinks, it was conformed that performance increases in energy with the number of mobile sinks, and with the number of movements by mobile devices.